Dr. Aqiang Lin

Associate Professor

School of Power and Energy

Northwestern Polytechnical University

China


Biography

Academic Homepage from Dr. Aqiang Lin:
Publons Homepage: https://publons.com/researcher/1569062/aqiang-lin/peer-review/
Associate Editor Homepage: https://asps-journals.com/index.php/ete/about/editorialTeam
Mendeley Homepage: https://www.mendeley.com/profiles/aqiang-lin/

Brief Introduction:
Dr. Aqiang Lin, Ph.D., Researcher, Associate Editor
(1) I am an associate professor at Northwestern Polytechnical University now, as well as an Associate Editor in Energy and Thermofluids Engineering (ISSN 2716-8026).
I received my doctoral degree in Power Engineering and Engineering Thermophysics graduated from Harbin Engineering University (HEU) in 2020. And, I received my Master’s degree in Power Engineering and Engineering Thermophysics graduated from Northeast Electric Power University (NEEPU) in 2016.
(2) I am a reviewer of 22 international journals such as “Applied Energy”, “Energy Conversion and Management”, “Energy”, “Energy and Buildings”, “Proceedings of the Multiphase, Part G: Journal of Aerospace Engineering”, “Energies”, “Sustainability”, “Journal of Applied Fluid Mechanics”. Please see at Publons Homepage( https://publons.com/researcher/1569062/aqiang-lin/peer-review/ ).
(3) My research interests focus on Energy Efficiency, Energy Management, Renewable Energy, Heat Transfer, Multiphase Flow, Fluid Mechanics, Aerodynamics, Turbomachinery, Turbulence, and CFD, etc.

Research Interest

focus on Energy Efficiency, Energy Management, Renewable Energy, Heat Transfer, Multiphase Flow, Fluid Mechanics, Aerodynamics, Turbomachinery, Turbulence, and CFD, etc.

Scientific Activities

Peer Review Summary
Performed 160+ Reviews for international journals including: (1) Applied Energy; (2) Energy Conversion and Management; (3) Energy; (4) Energy and Buildings; (5) International Journal of Heat and Mass Transfer; (6) Applied Thermal Engineering; (7) Journal of Fluid Mechanics; (8): Energies; (9) Sustainability; (10) Symmetry-Basel; (11) Indoor and Built Environment; (12) Journal of Applied Fluid Mechanics; (13) Proceedings of the Institution of Mechanical Engineer, Part G: Journal of Aerospace Engineering; (14) Acta Polytechnica; (15) International Agricultural Engineering Journal; (16) Journal of Marine Science and Engineering; (17) Vehicles, et al.
Awards on Elsevier’s Publons:
September 2019: Global Peer Review Awards — For Top 1% of reviewer in Engineering and Cross-Field. —— Honoring the elite contributions to scholarly peer review and editorial pursuits internationally.

Publications

[1] Aqiang Lin, Yonggang Sun, Hai Zhang, Xiang Lin, Lu Yang, Qun Zheng. Fluctuating characteristics of air-mist mixture flow with conjugate wall-film motion in a compressor of gas turbine[J]. Applied Thermal Engineering, 2018, 142: 779-792.
[2] Aqiang Lin, Jie Zhou, Hamza Fawzy, Hai Zhang, Qun Zheng. Evaluation of mass injection cooling on flow and heat transfer characteristics for high-temperature inlet air in a MIPCC engine[J]. International Journal of Heat and Mass Transfer, 2019, 135: 620-630.
[3] Aqiang Lin, Qun Zheng, Yuting Jiang, Xiang Lin, Hai Zhang. Sensitivity of air/mist non-equilibrium phase transition cooling to transient characteristics in a compressor of gas turbine[J]. International Journal of Heat and Mass Transfer, 2019, 137: 882-894.
[4] Aqiang Lin, Qun Zheng, Hamza Fawzy, Mingcong Luo, Jie Zhou, Hai Zhang. Effect of water injection cooling on flow field characteristics in the cooling section of precooled turbine-based combined cycle engine[J]. International Journal of Heat and Mass Transfer, 2019, 141: 615-626.
[5] Xiaoqiang Jiang, Aqiang Lin (Corresponding Author), Adil Malik, Xinye Chang, Yuanyuan Xu. Numerical investigation on aerodynamic characteristics of exhaust passage with consideration of multi-factor components in a supercritical steam turbine[J]. Applied Thermal Engineering, 2019, 162: 114085.
[6] Aqiang Lin, Qun Zheng, Lu Yang, Hai Zhang. Effect of inlet air pre-cooling of water injection on compressor performance at high flight Mach[J]. Journal of Applied Fluid Mechanics, 2019, 12(2): 421-431.
[7] Aqiang Lin, Jie Zhou, Xiaojiang Tian, Qun Zheng, Hai Zhang. Effective boundary conditions and numerical method for flow characteristics of aeroengine compressor at high Mach flight[J]. Journal of Applied Fluid Mechanics, 2019, 12(3): 845-855.
[8] Aqiang Lin, Xinye Chang, Lihua Cao, Hai Zhnag, Lanxin Sun. Effect of Wet Steam on Aerodynamic Performance of Low-pressure Exhaust Passage with Last Stage Blade[J]. Journal of Applied Fluid Mechanics, 2019, 12(6): 1837-1845.
[9] Aqiang Lin, Qun Zheng, Hai Zhang, Yuting Jiang. Analysis of mass injection cooling on aero-engine compressor characteristics, Journal of Harbin Engineering University, 2019, 40(9): 1837-1845. (in Chinese)
[10] Aqiang Lin, Qun Zheng, Feng Wu, Hao Yang, Hai Zhang, Investigation on Mass Injection Pre-Cooling Technology of Aero-Turbine Engine, Journal of Propulsion Technology, 2020, 41(04),721-728. (in Chinese)
[11] Lu Yang, Qun Zheng, Aqiang Lin, Mingcong Luo, Unsteady performance and thermodynamic analysis of aero-engine compressor at different water ingestion conditions, International Journal of Energy Research, 2020, 1203-1221.
[12] Lihua Cao, Heyong Si, Aqiang Lin, et al. Multi-factor optimization study on aerodynamic performance of low-pressure exhaust passage in steam turbines, Applied Thermal Engineering 124 (2017) 224-231.
[13] Lihua Cao, Aqiang Lin, Yong Li, Bin Xiao. Optimum tilt angle of flow guide in steam turbine exhaust hood considering the effect of last stage flow field, Chinese Journal of Mechanical Engineering, 30(2017): 866-875.
[14] Lihua Cao, Aqiang Lin. Optimal design of flow guide in exhaust hood based on quadratic regression orthogonal methodology, Journal of Mechanical Engineering, 2016, 52(14):157-164. (In Chinese)
[15] Adil Malik, Qun Zheng, Aqiang Lin. The design and performance analysis of highly loaded compressor of closed Brayton cycle HTGR power plant with helium xenon gas mixture as working fluid[J]. Progress in Nuclear Energy, 2019, 117: 103084.
[16] Lu Yang, Hai Zhang, Aqiang Lin. Effects of water ingestion on the tip clearance flow in compressor rotors[J]. Proc. IMechE Part G: Journal of Aerospace Engineering, 2018, 233(11): 4235-4246.
[17] Chunlei Liu, Qun Zheng, Qi Wang, Aqiang Lin, Yuting Jiang, Mingcong Luo. Sensitivity Analysis of Multistage Compressor Characteristics Under the Spray
Atomization Effect Using a CFD Model[J]. Energies, 2019, 12(2): 301.
[18] Yuhang Cai, Asad A. Zaidi, Gaoshuai Wang, Aqiang Lin. Influence of salinity on biological treatment of ship domestic sewage using an air-lift multilevel circulation membrane reactor[J]. Environmental Science and Pollution Research, 2019.
[19] Yuhang Cai, Xin Li, Syed A.A. Zaidi, …, Aqiang Lin, C. Liu. Effect of hydraulic retention time on pollutants removal from real ship sewage treatment via a pilot-scale air-lift multilevel circulation membrane bioreactor[J], Chemosphere, 2019.
[20] Yuhang Cai, Teng Ben, Syed Asad Ali Zaidi, …, Aqiang Lin, C. Liu. Effect of pH on Pollutants Removal of Ship Sewage Treatment in an Innovative Aerobic-Anaerobic Micro-Sludge MBR System[J]. Water Air and Soil Pollution, 2019, 230(7).
[21] Xiaoqiang Jiang, Aqiang Lin, Hailing Ma, Xingyou Li, Yiyu Li. Minimizing thermal bridge through the columns in a refrigerating room[J]. Applied Thermal Engineering, 2020, 165.
[22] Lihua Cao, Aqiang Lin, Yong Li. Study of tilt angle impact of flow deflector ring on aerodynamic performance of exhaust hood in steam turbine, Journal of Chemical Machinery 43 (2016) 199-203. (in Chinese)
[23] Weimin Yang, Wenbin Lin, Aqiang Lin, et al. Study on installing flow guide devices in steam turbine exhaust passage considering the thermodynamic behavior of wet steam, Turbine Technology 57 (2015) 258-261. (in Chinese)

Submit Article

Join as a Editor