Editorial Panel

Editors

Dr. Bimal K. Bose, D.Sc.(Honoris Causa), Life Fellow, IEEE

Emeritus Chair Professor in Power ElectronicsMember, U.S. National Academy of EngineeringFormerly Chief Scientist, EPRI-Power Electronics Applications CenterDept. of Electrical Engineering and Computer ScienceThe University of Tennessee, Knoxville, USA
Bimal K. Bose (Life Fellow, IEEE) received the B.E. degree from Indian Institute of Engineering Science and Technology (IIEST) (formerly Bengal Engineering College), India, the M.S. degree from the University of Wisconsin, Madison, and the Ph.D. degree from Calcutta University, India in 1956, 1960, and 1966, respectively. Currently, he is Emeritus Professor in the University of Tennessee, Knoxville.
Early in the career, he was a faculty member of IIEST from 1960 to 1971. From 1971 to 1976, he was an associate professor of electrical engineering at the Rensselaer Polytechnic Institute, Troy, New York. From 1976 to 1987, he was a research engineer in General Electric Corporate Research and Development (GE-CRD) (now GE Global Research Center), Schenectady, New York. Since 1987, he had been Endowed Chair Professor (Condra Chair of Excellence in Power Electronics) in the University of Tennessee, until 2003. He specialized in power electronics and motor drives that include AI applications, renewable energy systems, DSP-based digital control systems, and power electronics applications for solving climate change problems. He has authored/edited seven books in power electronics (Power Electronics and Motor Drives – Advances and Trends, Academic Press, 2006; Modern Power Electronics and AC Drives, Prentice Hall, 2001; Power Electronics and Variable Frequency Drives, IEEE Press, 1997; Modern Power Electronics, IEEE Press, 1992; Microcomputer Control of Power Electronics and Drives, IEEE Press, 1987; Power Electronics and AC Drives, Prentice Hall, 1986; Adjustable Speed AC Drive Systems, IEEE Press, 1982), holds 21 U. S. patents and published more than 250 papers. He was awarded IEEE Power Electronics Society Newell Award (2005), IEEE Millennium Medal (2000), IEEE Meritorious Achievement Award in Continuing Education (1997), IEEE Lamme Medal (1996), IEEE Industrial Electronics Society (IES) Eugene Mittelman Award (for lifetime achievement) (1994), IEEE Region 3 Outstanding Engineer Award (1994), IEEE Industry Applications Society (IAS) Outstanding Achievement Award (1993), General Electric Silver Patent Medal (1986), GE Publication Award (1985), and Calcutta University Mouat Gold Medal (1970). He also received IIEST Distinguished Alumnus Award (2006), D. Sc. Degree (Honoris Causa) from IIEST (2013), Distinguished Lecturership of IAS and IES, and a number of prize paper awards. He is a member of U. S. National Academy of Engineering. The IEEE Industrial Electronics Magazine published a special issue (June 2009) “Honoring Dr. Bimal Bose and Celebrating His Contributions in Power Electronics” with a front cover photo. The IES Dr. Bimal Bose Energy Systems Award was established from 2014 which is funded by the IEEE Foundation and the IES. 0
Dr. Bose served the IEEE in various capacities, including Member of the IEEE Awards Board, Chairman of IEEE Medal in Power Engineering Committee, Chairman of the IEEE IES Power Electronics Council, Associate Editor of IEEE Transactions on Industrial Electronics, Member of the IEEE Fellow Committee, Vice-Chair of IEEE Medals Council, and Member of the Proceedings of the IEEE Editorial Board (1995-2006). He was the Guest Editor of the Proc. IEEE “Special Issue on Power Electronics and Motion Control” which was published in August 1994.
Honors and Awards

2013: Bengal Engineering and Science University Doctor of Science Degree (Honoris Causa) from the President of India “in recognition of Outstanding Contribution in Engineering and Dedicated Service to The Nation”
2006: Bengal Engineering and Science University Distinguished Alumnus Award “for Outstanding Contribution to the Profession and the Alma Mater”
2005: IEEE* Power Electronics Society William W. Newell Award “for Outstanding Achievements in the Interdisciplinary Field of Power Electronics”
2003: Guest Professor of Huazhong University of Science and Technology, China
2000: IEEE* Millennium Medal “for Outstanding Contributions in Power Electronics”
1998: Honorary Professor (and Honorary Director of Elec. Eng. Inst.) of Xi’an Mining Institute, China
1997: IEEE* Meritorious Achievement Award in Continuing Education “for Exemplary and Sustained Contributions to Continuing Education”
1996: IEEE* Lamme Gold Medal (1996) “for Contributions to the advancement of Power Electronics and Electrical Machine Drives”
1996: IEEE* Life Fellow (1996) (Fellow in 1989) “for Contributions in Power Electronics and Drives Technology”
1996: Honorary Professor of China University of Mining and Technology, China (1996)
1994: IEEE* Industrial Electronics Society Dr. Eugene Mittelmann Award “in Recognition of Outstanding Contributions to Research and Development in the Field of Power Electronics and Life Time Achievement in the Area of Motor Drives”
1994: IEEE* Region 3 Outstanding Engineer Award “for Outstanding Achievements in Power Electronics and Drives Technology “
1993: IEEE* Industry Applications Society Outstanding Achievement Award “for Outstanding Contributions in the Applications of Electricity to Industry”
1991: Honorary Professor of Shanghai University, China
1986: GE Silver Patent Medal
1985: GE Publications Award
1970: Calcutta University Mouat Gold Medal and Premchand Roychand Scholar “for Research Contribution in Magnetic Amplifiers and Industrial Electronics”
Distinguished Lecturer of IEEE*– Industry Applications Society
Distinguished Lecturer of IEEE* – Industrial Electronics Society
Four – Prize paper awards

2013: “Global Energy scenario and impact of power electronics in 21st century”, IEEE Trans. on Ind. Electronics, vol. 60, July.
2009: “The Past, Present and Future of Power Electronics”, IEEE Industrial Electronics Magazine, vol.3, pp. 7-11, June.
2009: “Power Electronics and Motor Drives” –Recent Progress and Perspective”, IEEE Trans. on Ind. Electronics”, vol. 56, pp. 581-588. Feb.
2007: “Neural network applications in power electronics and motor drives”, IEEE Trans. on Ind. Electronics, vol. 54, pp. 14-33. Feb.
2004: “A neural network based space vector PWM of a five-level voltage-fed inverter”, IEEE IAS Annu. Meet. Conf. Rec. (with N. Filho, J. Pinto and L. da Silva)
2004: “Neural network based waveform processing and delayless filtering in power electronics and ac drives”, IEEE Trans. on Ind. Electronics, vol. 51, pp. 981-991. Oct., (with J. Zhao)
2002: “A neural network based space vector PWM controller for a three-level voltage-fed inverter induction motor drive”, IEEE Trans. on Ind. Appl., vol. 38, pp.660-669, May/June, (with S. Mondal and J. Pinto)
2000. “Energy, environment and advances in power electronics”, IEEE Trans. on Power Electronics, vol. 15, pp.688-701, July.
1998: “A soft-switched high frequency non-resonant link integral pulse modulated dc-ac converter for ac motor drive”, IEEE IECON Conf. Rec., pp. 716-732. (with L. Hui and B. Ozpineci)
1997: “Fuzzy logic based intelligent control of a variable speed cage machine wind generation system”, IEEE Trans. on Power Electronics, vol. 12, pp. 87-95.Jan., (with M. Simoes etc.)
1995: “Expert system aided automated design, simulation and controller tuning of ac drive system”, IEEE IECON Conf. Rec., pp.712-718. (with S. Chhaya)
1995: “Neural network based estimation of feedback signals for a vector controlled induction motor drive”, IEEE Trans. on Ind. Appl., vol.31, pp.620-609, May/June, (with M. Simoes)
1995: “Fuzzy logic based efficiency optimization control of an indirect vector controlled induction motor drive”, IEEE Trans. on Ind. Electronics, vol. 42, pp. 192-198, April, (with G. Sousa and J. Cleland)
1994: “A fuzzy set theory based control of a phase controlled converter dc machine drive”, IEEE Trans. on Ind. Appl., vol. 30, pp. 34-44, Jan./Feb. (with G. Sousa)
1994: “Investigation of fault modes of voltage-fed inverter system for induction motor drive”, IEEE Trans. on Ind. Appl. , vol.30, pp. 1028-1038, July/Aug.,(with D. Kastha)
1994: “Expert system, fuzzy logic, and neural network applications in power electronics and motion control”, Proc. IEEE, vol.82, pp. 1303-1323, Aug.
1990. “An adaptive hysteresis band current control technique of a voltage-fed PWM inverter for machine drive system”, IEEE Trans. Ind. Electron., vol.37, pp. 402-408, Oct.
1988. “A high- performance inverter-fed drive system of an interior permanent magnet synchronous machine”, vol.24, pp. 987-999, Nov./Dec.
1985: “A microcomputer based control of residential photovoltaic power conditioning system”, IEEE Trans. on Ind. Appl., vol. 21, pp. 1182-1191, (with R. Steigerwald and P. Szczesny)
1977. “High frequency link power conversion”, IEEE Trans. Ind. Appl., vol.13, pp.387-393, Sept./Oct. (with P. Espelage)
1976. “A frequency step up cycloconverter using power transistors in inverse series mode”, Int’l. Jour. of Electronics, vol.41, pp. 573-587, (with V. Jones)

Dr. Yu Hongyu, PhD

ProfessorDepartment of Electrical and Electronic EngineeringSouth University of Science and TechnologyShenzhen, Guangdong, China
Hongyu Yu, professor and deputy Chair of the Department of Electrical and Electronic Engineering, Southern University of Science and Technology from 2011 to 2018, currently serves as Executive Director of School Of Microelectronics Planning Office and Deputy Director of Shenzhen Institute Of Wide Gap Semiconductors. He has set up for the third of generation semiconductor research institute in Shenzhen and is currently in charge of the building of SUSTech-HKUST Joint School of Microelectronics. Established Shenzhen third-generation semiconductor key laboratory, Guangdong province GaN device engineering technology center, and served as director. He has been awarded the "1000 Talents Program for Young Scholars", Peacock project Shenzhen, Pengcheng scholar, Fellow of IET, special government allowance, deputy editor of Science Bulletin(China's top comprehensive academic journal) and editor of Journal of Semiconductor.
He received his BSc, MSc, and PhD from Tsinghua University, University of Toronto, and the National University of Singapore, respectively. He is a senior researcher in IMEC Belgium 2004 to 2008. From 2008 to 2011, he served as an assistant professor in the department of Electrical and Electronics Engineering, Nanyang Technological University, Singapore.
Professor yu Hongyu has achieved a series of innovative work in integrated circuit technology and devices, including CMOS, new ultra-high density memory, GaN device and system integration (GaN HEMT). He published more than 350 papers (>160 journal papers + >160 conference papers) with an SCI H-index of 37;Written 4 book chapters, edited 2 books: “Hafnium: Chemical Characteristics, Production and Application” and “Gallium Nitride Power Devices”. Applied/authorized 20 US/European patents and 10 Chinese patents. As a PI, he has undertaken ~20 research/talent projects, with a total funding ~ 50 million RMB. He has built a 1,200-square-metre clean room in Southern University of Science and Technology, forming a full 6-inch CMOS lab which hardware will reach the top level in southern China.
GaN power device and system integration
Multi-layer Ceramic Capacitor
Advanced CMOS process
New Ultra-high Density Memory
AWARDS

• Advisory Board Member of The Open Electrical & Electronic Engineering Journal (2018)
• Editorial Board Member of Integrated Circuit Industry Encyclopedia (2018)
• Outstanding Scientific Research Award in South University of Science and Technology (2016)
• Pengcheng scholar (2014)
• Peacock Project ,Shenzhen (2013)
• Shenzhen government special allowance (2012)
• Fellow of IET (2012)
• Senior Member of IEEE (2012)
• Editorial Board Member of Journal of Semiconductors (2011)
• “One Thousand Persons Plan” (2011)
• MRS-ICMAT Best Poster Award: Solar Cell (2011)
• The Recruitment Program of Global Experts (Young Scholar Program), Organization Department of the CCCPC (2011)
• Chen Zhenchuan Academic Exchange Award (2009)
• Nanyang Assistant Professorship, NTU (2008)
• Highlight paper in Symposium on VLSI Technology, (2007, Kyoto, Japan)
• IEEE Electron Device Society (EDS) Graduate Fellowship (2004, USA)
Published more than 350 papers (>160 journal papers + >180 conference papers) with a SCI H-index of 37;Edited 2 books and written 4 book chapters in area of CMOS/memory/Solar cell/GaN devices. Applied 23 US/European patents and 10 Chinese patents.
(A) Books:
1. H.Y. Yu, T.L. Duan “Gallium Nitride Power Devices,” Published by Pan Stanford Publishing, 2017
2. H.Y. Yu, “Hafnium: Chemical characteristics, production and applicaions”, Published by Nova Science Publishers, 2014
(B) Book Chapters:
1. H.Y. Yu, "Metal Gate Electrode and High-K Dielectrics for Sub-32nm Bulk CMOS Technology: Integrating Lanthanum Oxide (LaOx-) Capping Layer for Low-Vth Application", book chapter in "Solid State Circuits Technologies", ISBN 978-953-307-045-2, Ed. Jacobus W. Swart, IN-TECH, Jan. 2010
2. J.S. Li, H.Y. Yu, “Enhancement of Si-based solar cell efficiency via nanostructure integration”, book chapter in “Energy Efficiency and Renewable Energy through Nanotechnology”, ISBN, 978-0-85729-637-5: .3-56, Ed. L. Zang, Springer, 2011
3. D.L. Kwong, Y. Sun, H.Y. Yu, N. Singh, P. Lo, “Ultra-high Density Non-volatile Flash Memory Devices Realized on CMOS Si Nanowires,” book chapter in “Nonvolatile Memories: Materials, Devices and Applications,” Ed. Tseung-Yuen Tseng, and Simon M. Sze, American Academic Press, 2011
4. H.Y. Yu, Z.R. Wang, “Nano-scale Resistive Random Access Memory: Materials, Devices and Circuits,” book chapter in “Applied nanotechnologies”, Edited by Kris Iniewski, CRS Press, 2013
(C) Patent Authorization:
1. H.Y. Yu, J.D. Chen, M.F. Li, D.L. Kwong, S. Biesemans, and J.A. Kittl “Low workfunction metal, use of this low workfunction metal as gate electrode for nMOS devices, a method for forming nMOS devices comprising such low workfunction metal and devices obtained thereof.” US 7,504,329 granted; EP 1722404-published; EP 1796151- published;
2. H.Y. Yu, M.F. Li, D.L. Kwong, and K.L. Bera, “A thermal robust semiconductor device using HfN as metal gate electrode and the manufacturing process thereof” US 7,514,360, granted
3. Yu HongYu, Chang Shou-Zen, Kittl Jorge Adrian, Lauwers Anne, Veloso Anabela; “Semiconductor Device With Reduced Diffusion of Workfunction Modulating Element,” US 7,759,748, granted; EP 1 916 706 A2
4. Yu HongYu, S. Biesemans, “Method for forming a fully germanosilicided gate mosfet and devices obtained thereof,” EP 1744352-published; JP 2007 027725-published; US 2007 0023849-published
5. Pantisano Luigi, Schram Tom; De Gendt Stefan; Akheyar Amal; Pourtois Geoffrey; Yu HongYu; “Method for modulating the effective work function,” US 2007 0272967 – published
6. Yu HongYu, Lousberg Gregory;, “Semiconductor devices,” US 20070267762 – published
7. H. Tigelaar, S. Kubicek, H.Y. Yu, “Method of manufacturing a semiconductor device with multiple dielectric.,” US 2008-0096383 – published; EU: EP1914800 A1
8. Chang Shou-Zen, Kittl Jorge Adrian; Yu HongYu; Lauwers Anne; Veloso Anabela; “Semiconductor device comprising a doped metal comprising main electrode,” US 20080136030 A1 – published
9. Chang Shou-Zen, HongYu Yu, Anabela Veloso, Rita Vos, Stefan Kubicek, Serge Biesemans, Raghunath Singanamalla, Anne Lauwers, Bart Onsia, “Methods for manufacturing a CMOS device with dual dielectric layers,” US2008/0191286 A1 – published
10. Chang Shou-Zen; H.Y. Yu; “Method of manufacturing a semiconductor device with dual fully silicided gate,” US patent 2008-0134469 A1
11. S-Z. Chang, H.Y. Yu, A. Veloso, Rita Vos, Stefan Kubicek, Serge Biesemans, Raghunath Singanamalla, Anne Lauwers, Bart Onsia, “Methods for manufacturing a CMOS device with dual dielectric layers,” US2008-0191286, published, CN, EP, patent filed
12. Pantisano Luigi; Schram Tom, De Gendt Stefan, Akheyar Amal; Wang XinPeng; Li Mingfu; Yu HongYu; “Method for modulating the effective work function,” US 2009 0050982 A1 – published
13. Chang Shou-Zen; Hoffmann Thomas Y.; Pourtois Geoffrey; Yu HongYu, “Dual work function device with stressor layer and method for manufacturing the same” US 2009 0174003 A1; EU EP 2061076 A1
14. B. Govoreanu, H.Y. Yu, H-J. Cho, “Non-Volatile Memory Device with Improved Immunity to Erase Saturation and Method for Manufacturing Same,” US 2009-0134453 A1
15. B. Govoreanu, H.Y. Yu, H-J. Cho, “Interpoly dielectric for a non-volatile memory device with a metal or p-type controle gate,” EU EP 2063459 A1
16. Chang Shou-Zen; Yu HongYu, Hoffmann Thomas Y.; “Semiconductor device and method for fabricating the same” US 20090206417 A1; EU patent, EP 2093796 A1
17. H.Y. Yu, Shou-Zen Chang, Hoffmann Thomas Y., Absil Philippe, “Method of fabricating a dual workfunction semiconductor device made thereof” EU patent, EP 2112686 A3
18. Chang Shih-Hsun (Vincent); Singanamalla Raghunath; Yu HongYu; Kaushik Vidya S.; Schram Tom; Kubicek Stefan; Biesemans Serge; Van Elshocht Sven; De Gendt Stefan; Heyns Marc, “Semiconductor devices having dual metal gates and method for making the same,” US patent, filed
19. Hag-Ju Cho, Anabela Veloso, Hongyu Yu, Stefan Kubicek, Shou-Zen Chang, “Semiconductor device and method for fabricating the same”, US patent, filed; EU patent, EP 2083441 A1
20. H.Y. Yu, Shou-Zen Chang, Method of manufacturing a semiconductor device with dual fully silicided gate, EU patent: EP 1 928 021 A1
21. Chang Shou-Zen; Yu HongYu, “Method for fabricating a dual workfunction semiconductor device and the device made thereof” EU patent, 08075619.0 – 1235
22. Jinping Liu, Hongyu Yu, Kin Leong Pey, Alex See PH, Mei Sheng Zhou, Liang Choo Hsia, “Multi-stack Nanocrystals for NVM,” USA Application
23. Gang Zhang, P. Lo, J.S. Li, S.M. Wong, H.M. Wong, HongYu Yu, D.L. Kwong, “Application of inhomogeneous-diameters SiNWs to enhance solar cell ultimate efficiency” , USA Application
24. Yu HongYu, Zhang Shuxiang, Yang Qinghua, “一种集成不同厚度金属层以调节功函数的方法” , CN104779205B, 2018/06/26
25. Jiang Lingli, Li Tao, Wang Ning, Yu Hongyu, Chen Lang, “一种微波放大器件”, CN206834181U , 2018/01/02
26. Jiang Lingli, Li Tao, Wang Ning, Yu Hongyu, “一种高速电力开关器件”, CN206685393U , 2017/11/28
27. Yu HongYu, Zhang Shuxiang, Yang Qinghua, “一种后栅工艺中的栅极形成方法” , CN104779150B, 2017/10/20
28. Li Tao, Yu Hongyu, Jiang Lingli, “一种AC-DC适配器” , CN205544987U, 2016/08/31
29. Xia Kunpeng, Dong Bin, Yu Hongyu, Lin Jie, Cheng Qijia, Jiang Lingli, Liu Zongdai, “一种电源适配器” , CN204578387U, 2015/08/19
30. Zhou ZhiHui, Zhang Lei, Yu HongYu, Li Jian, He Kai, Chen Lang, “流延机刮刀装置”, CN206357519U,2017/07/28

(D) Papers:
1. H.Y. Yu*, X.D. Feng, D. Grozea, Z.H. Lu, R. Sodhi, A.M. Hor, H. Aziz. Surface electronic structure of plasma-treated indium tin oxides. Applied Physics Letters, 2001, 78(17): 2595-2597
2. H.Y. Yu*, M.F. Li, B.J. Cho, C.C. Yeo, M.S. Joo, D.L. Kwong, J.S. Pan, C.H. Ang, J.Z. Zheng, S. Ramanathan. Energy gap and band alignment for (HfO2)x(Al2O3)1-x on (100) Si. Applied Physics Letters, 2001, 81(2): 376-378
3. H.Y. Yu*, N. Wu, M.F. Li, C.X. Zhu, B.J. Cho, D.L. Kwong, C.H. Tung, J.S. Pan, J.W. Chai, W.D. Wang, D.Z. Chi, S. Ramanathan. Thermal stability of (HfO2)x(Al2O3)1-x on Si. Applied Physics Letters, 2002, 81(19): 3618-3620
4. H.Y. Yu*, Y.T. Hou, M.F. Li, D.L. Kwong. Hole tunneling current through oxynitride/oxide stack and the stack optimization for p-MOSFETs. IEEE Electron Device Letters, 2002, 23(5):285-287
5. Y.T. Hou*, M.F. Li, H.Y. Yu, D.L. Kwong. Modeling of tunneling currents through HfO2 and (HfO2)x(Al2O3)1-x gate stacks. IEEE Electron Device Letters, 2003, 24(2): 96-98
6. H.Y. Yu*, H.F. Lim, J.H. Chen, M.F. Li, C.X. Zhu, C.H. Tung, A. Du, W. Wang, D. Chi, D.L. Kwong. Physical and electrical characteristic of HfN gate electrode for advanced MOS devices. IEEE Electron Device Letters, 2003, 24(4): 230-232
7. M.S. Joo, B.J. Cho*, C.C. Yeo, N. Wu, H.Y. Yu, C.X. Zhu, M.F. Li, D.L. Kwong, N. Balasubramanian. Dependence of chemical composition ratio on electrical properties of HfO2-A2O3 gate dielectric. Japanese Journal of Applied Physics Part 2-Letters & Express Letters, 2003, 42(3A):220-222
8. H.Y. Yu*, J.F. Kang, C. Ren, J.D. Chen, Y.T. Hou, C. Shen, M.F. Li, D.S.H. Chan, K.L. Bera, C.H. Tung, D.L. Kwong. Robust high-quality HfN-HfO2 gate stack for advanced MOS device applications. IEEE Electron Device Letters, 2004, 25(2): 70-72
9. J.F. Kang*, H.Y. Yu, C. Ren, M.F. Li, DSH. Chan, H. Hu, H.F. Lim, W.D. Wang, D. Gui, D.L. Kwong. Thermal Stability of nitrogen incorporated in HfNxOy gate dielectrics by reactive sputtering. Applied Physics Letters, 2004, 84(9): 1588-1590
10. C. Ren, H.Y. Yu, J.F. Kang, Y.T. Hou, D.S.H. Chan*, M.F. Li, W.D. Wang, D.L. Kwong. Fermi-level pinning induced thermal instability in the effective work function of TaN in TaN/SiO2 gate stack. IEEE Electron Device Letters, 2004, 25(3): 123-125
11. H.Y. Yu, C. Ren, Y.C. Yeo, J.F. Kang, X.P. Wang, H.H.H. Ma, M.F. Li*, D.S.H. Chan, D.L. Kwong. Fermi level-pinning induced thermal instability of metal gate work functions. IEEE Electron Device Letters, 2004, 25(5): 337-339
12. S.Y. Zhu*, H.Y. Yu, S.J. Whang, J.H. Chen, C. Shen, C.X. Zhu, S.J. Lee, M.F. Li, D.S.H. Chan, W.J. Yoo. A. Du, C.H. Tung, J. Singh, A. Chin, D.L. Kwong, Schottky-barrier S/D MOSFETs with high-K gate dielectrics and metal gate electrode. IEEE Electron Device Letters, 2004, 25(5): 268-270
13. C. Ren*, H.Y. Yu, J.F. Kang, X.P. Wang, H.H.H. Ma, Y.C. Yeo, M.F. Li, D.S.H. Chan, D.L. Kwong. A dual-metal gate integration process for CMOS with sub-1-nm EOT HfO2 by using HfN replacement gate. IEEE Electron Device Letters, 2004, 25(8): 580-582
14. C. Ren*, H.Y. Yu, X.P. Wang, H.H. Ma, D.S.H. Chan, M.F. Li, Y.C. Yeo, C.H. Tung, N. Balasubramanian, A.C.H. Huan, J.S. Pan, D.L. Kwong. Thermally robust TaTbxN metal gate electrode for n-MOSFETs applications. IEEE Electron Device Letters, 2005, 26(2): 75-77
15. C. Shen, M.F. Li*, H.Y. Yu, X.P. Wang, Y.C. Yeo, D.S.H. Chan, D.L. Kwong. Physical model for frequency-dependent dynamic charge trapping in metaloxide-semiconductor field effect transistors with HfO2 gate dielectric.
Applied Physics Letters, 2005, 86(9), 093510
16. J.F. Kang*, H.Y. Yu, C. Ren, X.P. Wang, M.F. Li, D.S.H. Chan, Y.C. Yeo, N. Sa, H. Yang, X.Y. Liu, R.Q. Han, D.L. Kwong. Improved electrical and reliability characteristics of HfN-HfO2-gated nMOSFET with 0.95-nm EOT fabricated using a gate-first process. IEEE Electron Device Letters, 2005, 26(4): 237-239
17. N. Sa*, J.F. Kang, H. Yang, X.Y. Liu, Y.D. He, R.Q. Han, C. Ren, H.Y. Yu, D.S.H. Chan, D.L. Kwong. Mechanism of positive-bias temperature instability in sub-1-nm TaN/HfN/HfO2 gate stack with low preexisting traps. IEEE Electron Device Letters, 2005, 26(9): 610-612
18. J.F. Kang*, H.Y. Yu, C. Ren, M.F. Li, D.S.H. Chan, X.Y. Liu, D.L. Kwong. Ultrathin HfO2(EOT <0.75nm) gate stack with TaN/HfN electrodes fabricated using a high-temperature process. Electrochemical and Solid-State Letters, 2005, 8(11): G311-313.
19. J.F. Kang*, H.Y. Yu, C. Ren, X.Y. Liu, R.Q. Han, B. Yu, D.L. Kwong. An improved pregate cleaning process for high-k gate dielectric fabrication. Electrochemical and Solid-State Letters, 2005, 8(11): G314-316
20. J.D. Chen, H.Y. Yu*, M.F. Li, D.L. Kwong, M. van Dal, J.A. Kittl, A. Lauwers, P. Absil, M. Jurczak, S. Biesemans. Yb-doped NiFUSI for the n-MOSFETs gate electrode application. IEEE Electron Device Letters, 2006, 27(3): 160-162
21. R. Singanamalla*, H.Y. Yu, G. Pourtois, I. Ferain, A. Kottantharayil, S. Kubicek, M. Jurczak, S. Biesemans, K. De Meyer. On the impact of TiN film thickness variations on the effective work function of poly-Si/TiN/SiO2 and poly-Si/TiN/HfSiON gate stacks. IEEE Electron Device Letters, 2006, 27(5): 332-334
22. G. R. Lousberg*, H.Y. Yu, B. Froment, E. Augendre, A. De Keersgieter, A. Lauwers, M.F. Li, P. Absil, M. Jurczak, S. Biesemans. Schottky-Barrier height lowering by an increase of the substrate doping in PtSi Schottky barrier source/drain FETs. IEEE Electron Device Letters, 2007, 28(2): 123-125
23. H.Y. Yu*, A. Lauwers, C. Demeurisse, O. Richard, S. Mertens, E. Rosseel, P. Absil, S. Biesemans. Electrical properties of nMOSFETs using the NiSi:Yb FUSI electrode. IEEE Electron Device Letters, 2007, 28(2): 154-156
24. X.P. Wang*, H.Y. Yu, M.F. Li, C. X. Zhu, S. Biesemans, A. Chin, Y.Y. Sun, Y. P. Feng, A. Lim, Y.C. Yeo, W.Y. Loh, G.Q. Lo, D.L. Kwong. Wide V-fb and V-th tunability for metal-gated MOS devices with HfLaO gate dielectrics. IEEE Electron Device Letters, 2007, 28(4): 258-260
25. R. Singanamalla*, H.Y. Yu, T. Janssens, S. Kubicek, K. De Meyer. The study of effective work function modulation by as ion implantation in TiN/TaN/HfO2 stacks. Japanese Journal of Applied Physics Part 2-Letters&Express Letters, 2007, 46(12-16): L320-322
26. L.A. Ragnarsson*, V.S. Chang, H.Y. Yu, H.J. Cho, T. Conard, K.M. Yin, A. Delabie, J. Swerts, T. Schram, S. De Gendt, S. Biesemans. Achieving conduction band-edge effective work functions by La2O3 capping of hafnium silicates. IEEE Electron Device Letters, 2007, 28(6): 486-488
27. S. Z. Chang, H.Y. Yu*, A. Veloso, A. Lauwers, D. Annelies, J.L. Everaet, C. Kerner, P. Absil, T. Hoffmann, S. Biesemans. The application of an ultrathin ALD HfSiON cap layer on SiON dielectrics for Ni-FUSICMOS technology targeting at low-power applications. IEEE Electron Device Letters, 2007, 28(7): 634-636
28. H.Y. Yu*, R. Singanamalla, L Å Ragnarsson, S.Z. Chang, V.S. Chang, H.J. Cho, R. Mitsuhashi, C. Adelmann, S. Van Elshocht, P. Lehnen, K.M. Yin, S. Degendt, P. Absil, S. Biesemans. Demonstration of metal-gated low V-t n-MOSFETs using a Poly-Si/TaN/Dy2O3/SiON gate stack with a scaled EOT value. IEEE Electron Device Letters, 2007, 28(7): 656-658
29. H.Y. Yu*, S.Z. Chang, A. Veloso, A. Lauwers, C. Adelmann, B. Onsia, P. Lehnen, T. Kauerauf, S. Brus, K.M.Yin, P. Absil, S. Biesemans. Demonstration of low V-t Ni-FUSIN-MOSFETs with SiON dielectrics by using a Dy2O3 cap layer. IEEE Electron Device Letters, 2007, 28(11): 957-959
30. A. Veloso*, H.Y. Yu, C. Z. Chang, C. Adelmann, B. Onsia, S. Brus, M. Demand, A. Lauwers, B. J. O’Sullivan, R. Singanamalla, P. Lehnen, S. Van Elshocht, M. Jurczak, P. Absil, S. Biesemans. Achieving low-V-T Ni-FUSICMOS by ultra-thin Dy2O3 capping of hafnium silicate dielectrics. IEEE Electron Device Letters, 2007, 28(11): 980-983R.
31. Singanamalla*, H.Y. Yu, B. Van Daele, S. Kubicek, K. De Meyer. Effective work-function modulation by aluminum-ion implantation for metal-gate technology (poly-Si/TiN/SiO2). IEEE Electron Device Letters, 2007, 28(12): 1089-1091
32. A. Lauwers*, A. Veloso, S.Z. Chang, H.Y. Yu, T. Hoffmann, C. Kerner, M. Demand, A Rothschild, M. Niwa, I. Satoru, R. Mitsuhashi, M. Ameen, G. Whittemore, M. A. Pawlak, C. Vrancken, C. Demeurisse, S. Mertens, W. Vandervorst, P. Absil, S. Biesemans, J.A. Kittl. Cost-effective low VtNi-FUSICMOS on SiON by means of Al implant (pMOS) and Yb+P coimplant (nMOS). IEEE Electron Device Letters, 2008, 29(1): 34-37
33. X.P. Wang*, M.F. Li, H. Y. Yu, J. J. Yang, C.X. Zhu, A.Y. Du, W.Y. Loh, S. Biesemans, A. Chin, G.Q. Lo, D.L. Kwong. Widely tunable work function TaN/Ru stacking layer on HfLaO gate dielectric. IEEE Electron Device Letters, 2008, 29(1): 50-53
34. S. Z. Chang*, H. Y. Yu, A. Delabie, X. P. Wang, C. Adelmann, A. Akheyar, S. Van Elshocht, L. Nyns, J. Swerts, A. Marc, C. Kerner, P. Absil, T. Y. Hoffmann, S. Biesemans. Electrical properties of Low-V-T metal-gated n-MOSFETs using La2O3/SiOx as interfacial layer between HfLaO high-kappa dielectrics and Si channel. IEEE Electron Device Letters, 2008, 29(5): 430-433
35. H.J. Cho*, H.Y. Yu, V.S. Chang, A. Akheyar, S. Jakschik, T. Conard, T. Hantschel, A. Delabie, C. Adelmann, S. Van Elshocht, L.Å. Ragnarsson, T. Schram, P. Absil, S. Biesemans. The impact of stacked cap layers on effective work function with HfSiON and SiON gate dielectrics. IEEE Electron Device Letters, 2008, 29(7): 743-745
36. B.J. O’Sullivan*, R. Mitsuhashi, S. Ito, K. Oikawa, S. Kubicek, V. Paraschiv, C. Adelmann, A. Veloso, H.Y. Yu, T. Schram, S. Biesemans, T. Nakabayashi, A. Ikeda, M. Niwa. Work-Function Engineering for 32-nm-Node pMOS Devices: High-Performance TaCNO-Gated Films. IEEE Electron Device Letters, 2008, 29(11): 1203-1205
37. H.Y. Yu*, S.Z. Chang, M. Aoulaiche, C. Adelmann, X.P. Wang, B. Kaczer, P. Absil, A. Lauwers, S. Biesemans. Transistor threshold voltage modulation by Dy2O3 rare-earth oxide capping: The role of bulk dielectrics charge. Applied Physics Letters, 2008, 93(26): 263502
38. Z.X. Chen, H.Y. Yu*, N. Singh, N.S. Shen, R.D. Sayanthan, G.Q. Lo, D.L. Kwong. Demonstration of Tunneling FETs based on Highly Scalable Vertical Silicon Nanowires. IEEE Electron Device Letters, 2009, 30(7): 754-756
39. J.S. Li, H.Y. Yu*, S.M. Wong, G. Zhang, X.W. Sun, G.Q. Lo, D.L. Kwong. Si nanopillar array optimization on Si thin films for solar energy harvesting. Applied Physics Letters, 2009, 95(3): 033102
2009/7, also selected Virtual Journal of Nanoscale Science & Technology, 2009/8 (高引)
40. M.C. Chen, H.Y. Yu*, N. Singh, Y. Sun, N.S. Shen, X.H. Yuan, G.Q. Lo, D.L. Kwong. Vertical-Si-Nanowire SONOS Memory for Ultrahigh-Density Application. IEEE Electron Device Letters, 2009, 30(8): 879-881 2009/8
41. J.S. Li, H.Y. Yu*, S.M. Wong, G. Zhang, P.G.Q. Lo, D.L. Kwong. Design guidelines of periodic Si nanowire arrays for solar cell application. Applied Physics Letters, 2009, 95(24): 243113
42. F. Wang, H.Y. Yu*, J.S. Li, X.W. Sun, X.C. Wang, H. Zheng. Optical absorption enhancement in nanopore textured-silicon thin film for photovoltaic application. Optics Letters, 2010, 35(1): 40-42
43. L. Wu, H.Y. Yu*, K.L. Pey, D.Y. Lee, K.Y. Hsu, K.T. Huang, H.J. Tao, Y.J. Mii, J.S. Pan, M. Tuominen, and Eva Tois. Electrical and Physical Properties of Er-Doped HfO2 High-k Dielectrics Prepared by Atomic Layer Deposition. Electrochemical and Solid-State Letters, 2010, 13(2): G21-23
44. X.C. Wang*, H.Y. Zheng, C.W. Tan, F. Wang, H.Y. Yu, K.L. Pey. Fabrication of silicon nanobump arrays by near-field enhanced laser irradiation. Applied Physics Letters, 2010, 96(8): 084101
45. L. Wu, H.Y. Yu*, X. Li, K.L. Pey, J.S. Pan, J.W. Chai, Y.S. Chiu, C.T. Lin, J.H. Xu, H.J. Wann, X.F. Yu, D.Y. Lee, K.Y. Hsu, H.J. Tao. Thermal stability of TiN metal gate prepared by atomic layer deposition or physical vapor deposition on HfO2 high-K dielectric. Applied Physics Letters, 2010, 96(11): 113510
46. S.M. Wong, H.Y. Yu*, J.S. Li, G. Zhang, P.G.Q. Lo, D.L. Kwong. Design High-Efficiency Si Nanopillar-Array-Textured Thin-Film Solar Cell. IEEE Electron Device Letters, 2010, 31(4): 335-337
47. Z. Fang, H.Y. Yu*, W.J. Liu, Z.R. Wang, X.A. Tran, B. Gao, J.F. Kang. Temperature Instability of Resistive Switching on HfOx-Based RRAM Devices. IEEE Electron Device Letters, 2010, 31(5): 476-478
48. Y. Sun, H.Y. Yu*, N. Singh, N.S. Shen, G.Q. Lo, D.L. Kwong. Multibit Programmable Flash Memory Realized on Vertical Si Nanowire Channel. IEEE Electron Device Letters, 2010, 31(5): 390-392
49. G.F. Jiao*, Z.X. Chen, H.Y. Yu, X. Y. Huang, D. M. Huang, N. Singh, G. Q. Lo, D.L. Kwong, M.F. Li. Experimental Studies of Reliability Issues in Tunneling Field-Effect Transistors. IEEE Electron Device Letters, 2010, 31(5): 396-398
50. X.Y. Huang*, G.F. Jiao, W. Cao, D. Huang, H.Y. Yu, Z.X. Chen, N. Singh, G.Q. Lo, D.L. Kwong, M.F. Li. Effect of Interface Traps and Oxide Charge on Drain Current Degradation in Tunneling Field-Effect Transistors. IEEE Electron Device Letters, 2010, 31(8): 779-781
51. X.C. Li*, J.S. Li, T. Chen, B.K. Tay, J.X. Wang, H.Y. Yu. Periodically Aligned Si Nanopillar Arrays as Efficient Antireflection Layers for Solar Cell Applications. Nanoscale Research Letters, 2010, 5(11): 1721-1726 2010/11
52. J.S. Li, H.Y. Yu*, Y.L. Li, F. Wang, M.F. Yang, S.M. Wong. Low aspect-ratio hemispherical nanopit surface texturing for enhancing light absorption in crystalline Si thin film-based solar cells. Applied Physics Letters, 2011, 98(2): 021905
53. S.M. Wong, H.Y. Yu*, J.S. Li, Y.L. Li, N. Singh, P.G.Q. Lo, D.L. Kwong. Si Nanopillar Array Surface Textured Thin Film Solar Cell with Radial p-n Junction. IEEE Electron Device Letters, 2011, 32(2): 176-178
54. W.J. Liu, H.Y. Yu*, S.H. Xu, Q. Zhang, X. Zou, J.L. Wang, K.L. Pey, J. Wei, H.L. Zhu, M.F. Li. Understanding Asymmetric Transportation Behavior in Graphene Field-Effect Transistors Using Scanning Kelvin Probe Microscopy. IEEE Electron Device Letters, 2011, 32(2): 128-130
55. X.A. Tran, H.Y. Yu*, Y.C. Yeo, L. Wu, W.J. Liu, Z.R. Wang, Z. Fang, K.L. Pey, X.W. Sun, A.Y. Du, B.Y. Nguyen, M.F. Li. A High-Yield HfOx-Based Unipolar Resistive RAM Employing Ni Electrode Compatible with Si-Diode Selector for Crossbar Integration. IEEE Electron Device Letters, 2011, 32(3): 396-398
56. B. Gao*, H.W. Zhang, B. Chen, L.F. Liu, X.Y. Liu, R.Q. Han, J.F. Kang, Z. Fang, H.Y. Yu, B. Yu, D.L. Kwong, Modeling of Retention Failure Behavior in Bipolar Oxide-Based Resistive Switching Memory, IEEE Electron Device Letters, 2011, 32(3): 276-278
57. Y.H. Zhu, H.Y. Yu, W.J. Fan*. Band structures and optical gain of strained GaAsxP1-x-yNy/GaP quantum wells. Applied Physics Letters, 2011, 98(12): 121112
58. W. Cao*, C. Shen, S.Q. Cheng, D.M. Huang, H.Y. Yu, N. Singh, G. Q. Lo, D. L. Kwong, M.F. Li. Gate Tunneling in Nanowire MOSFETs. IEEE Electron Device Letters, 2011, 32(4): 461-463
59. Z. Fang, H.Y. Yu*, X. Li, N. Singh, G.Q. Lo, D.L. Kwong. HfOx/TiOx/HfOx/TiOx Multilayer-Based Forming- Free RRAM Devices With Excellent Uniformity. IEEE Electron Device Letters, 2011, 32(4): 566-568
60. Q.G. Du, C.H. Kam, H.V. Demir, H.Y. Yu, X.W. Sun*. Broadband absorption enhancement in randomly positioned silicon nanowire arrays for solar cell applications. Optics Letters, 2011, 36(10): 1884-1886
61. Q.G. Du, C.H. Kam, H.V. Demir, H.Y. Yu, X.W. Sun*. Enhanced optical absorption in nanopatterned silicon thin films with a nano-cone-hole structure for photovoltaic applications. Optics Letters, 2011, 36(9): 1713-1715
62. K. Zheng*, X.W. Sun, J.L. Zhao, Y. Wang, H.Y. Yu, H.V. Demir, K.L. Teo. An Indium-Free Transparent Resistive Switching Random Access Memory. IEEE Electron Device Letters, 2011, 32(6): 797-799
63. T.T. Le*, H.Y. Yu, Y.Sun, N. Singh, X. Zhou, N. Shen, G.Q. Lo, D.L. Kwong. High-Performance Poly-Si Vertical Nanowire Thin-Film Transistor and the Inverter Demonstration. IEEE Electron Device Letters, 2011, 32(6): 770-772
64. Y. Sun, H.Y. Yu*, N. Singh, K.C. Leong, G.Q. Lo, D.L. Kwong. Junctionless Vertical-Si-Nanowire-Channel-Based SONOS Memory With 2-Bit Storage per Cell. IEEE Electron Device Letters, 2011, 32(6): 725-727
65. T.L. Duan, H.Y. Yu*, L. Wu, Z.R. Wang, Y.L. Foo, J.S. Pan. Investigation of HfO2 high-k dielectrics electronic structure on SiO2/Si substrate by x-ray photoelectron spectroscopy. Applied Physics Letters,2011, 99(1): 012902
66. L. Wu, H.Y. Yu*. Device Performance and Reliability Improvement for MOSFETs With HfO2 Gate Dielectrics Fabricated Using Multideposition Room-Temperature Multiannealing. IEEE Electron Device Letters, 2011, 32(9): 1173-1175
67. X.A. Tran, H.Y. Yu*, B. Gao, J.F. Kang, X.W. Sun, Y.C. Yeo, B.Y. Nguyen, M.F. Li. Ni Electrode Unipolar Resistive RAM Performance Enhancement by AlOy Incorporation Into HfOx Switching Dielectrics. IEEE Electron Device Letters, 2011, 32(9): 1290-1292
68. X. Wu, Z. Fang, K. Li, M. Bosman, N. Raghavan, X. Li, H.Y. Yu, N. Singh, G.Q. Lo, X.X. Zhang, K.L. Pey*. Chemical insight into origin of forming-free resistive random-access memory devices. Applied Physics Letters, 2011, 99(13): 133504
69. W.J. Liu*, H.Y. Yu, J. Wei, M.F. Li. Impact of Process Induced Defects on the Contact Characteristics of Ti/Graphene Devices. Electrochemical and Solid State Letters, 2011, 14(12): K67-69
70. W.J. Liu, X.W. Sun, Z. Fang, Z.R. Wang, X.A. Tran, F. Wang, L. Wu, G.I. Ng, J.F. Zhang, J. Wei, H.L .Zhu, H.Y. Yu*. Positive Bias-Induced V-th Instability in Graphene Field Effect Transistors. IEEE Electron Device Letters, 2012, 33(3): 339-341
71. X.A. Tran, W.G. Zhu, B. Gao, J.F. Kang, W.J. Liu, Z. Fang, Z.R. Wang, Y.C. Yeo, B.Y. Nguyen, M.F. Li, H.Y. Yu*. A Self-Rectifying HfOx-Based Unipolar RRAM With NiSi Electrode. IEEE Electron Device Letters, 2012, 33(4): 585-587
72. X.A. Tran, W. Zhu, W.J. Liu, Y.C. Yeo, B.Y. Nguyen, H.Y. Yu*. A Self-Rectifying AlOy Bipolar RRAM With Sub-50-mu A Set/Reset Current for Cross-Bar Architecture. IEEE Electron Device Letters, 2012, 33(10): 1402-1404
73. B. Chen*, J.F. Kang, B. Gao, Y.X. Deng, L.F. Liu, X.Y. Liu, Z. Fang, H.Y. Yu, X.P. Wang, G.Q. Lo, D.L. Kwong. Endurance Degradation in Metal Oxide-Based Resistive Memory Induced by Oxygen Ion Loss Effect. IEEE Electron Device Letters, 2013, 34(10): 1292-1294
74. W.J. Liu*, X.A. Tran, X.B. Liu, J. Wei, H.Y. Yu*, X.W. Sun. Characteristics of a Single-Layer Graphene Field Effect Transistor with UV/ozone Treatment. ECS Solid State Letters, 2013, 2(1): M1-4
75. W.J. Liu*, X.A. Tran, H.Y. Yu*, X.W. Sun. A Self-Rectifying Unipolar HfOx Based RRAM Using Doped Germanium Bottom Electrode. Ecs Solid State Letters, 2013, 2(5): Q35-38
76. W.J. Liu, X.A. Tran, Z. Fang, H.D. Xiong*, H.Y. Yu*. A Self-Compliant One-Diode-One-Resistor Bipolar Resistive Random Access Memory for Low Power Application. IEEE Electron Device Letters, 2014, 35(2): 196-198
77. L. Hong, X.C. Wang, H.Y. Zheng, L.N. He, H. Wang, H.Y. Yu*. Rusli, High efficiency silicon nanohole/organic heterojunction hybrid solar cell. Applied Physics Letters, 2014, 104(5): 053104 Hong, L (Hong, Lei)[ 1,2 ] ; Wang,
78. G.X. Wan, T.L. Duan, S.X. Zhang, L.L. Jiang, B. Tang, J. Yan, C. Zhao, H.L. Zhu, H.Y. Yu*. Overshoot Stress on Ultra-Thin HfO2 High-kappa Layer and Its Impact on Lifetime Extraction. IEEE Electron Device Letters, 2015, 36(12): 1267-1270
79. H.Y. Yu*, Y.T. Hou, M.F. Li, D.L. Kwong. Investigation of hole-tunneling current through ultrathin oxynitride/oxide stack gate dielectrics in p-MOSFETs. IEEE Transaction on Electron Devices, 2002, 49(7): 1158-1164
80. H.Y. Yu*, M.F. Li, D.L. Kwong. Thermally robust HfN metal as a promising gate electrode for advanced MOS device applications. IEEE Transaction on Electron Devices, 2004, 51(4): 609-615
81. H.Y. Yu*, M.F. Li, D.L. Kwong. ALD (HfO2)x(Al2O3)1-x high-k gate dielectrics for advanced MOS devices application. Thin Solid Films, 2004, 462: 110-113
82. D. Gui*, J.F. Kang, H.Y. Yu, H.F. Lim. SIMS study on N diffusion in hafnium oxynitride. Applied Surface Science, 2004, 231: 590-593
83. M.F. Li*, G. Chen, C. Shen, X.P. Wang, H.Y. Yu, Y.C. Yeo, D.L. Kwong. Dynamic bias-temperature instability in ultrathin SiO2 and HfO2 metal-oxide-semiconductor field effect transistors and its impact on device lifetime. Japanese Journal of Applied Physics Part 1-Regular Papers Short Notes & Review Papers, 2004, 43(11B): 7807-7814
84. S.Y. Zhu, H.Y. Yu, J.D. Chen, S.J. Whang, J.H. Chen, C. Shen, C.X. Zhu, S.J. Lee, M.F. Li*, D.S.H. Chan, W.J. Yoo, A. Du, C.H. Tung, J. Singh, A. Chin, D.L. Kwong. Low temperature MOSFET technology with Schottky barrier source/drain, high-K gate dielectric and metal gate electrode. Solid-State Electronics, 2004, 48(10-11): 1987-1992
85. H.Y. Yu, C. Ren, Y.C. Yeo, J.F. Kang, X.P. Wang, H.H.H. Ma, M.F. Li, D.S.H. Chan, A.L. Kwong. Fermi pinning-induced thermal instability of metal-gate work functions. IEEE Electron Device Lettters, 2004, 25(5): 337-339
86. G. Du*, X.Y. Liu, Z.L. Xia, J.F. Kang, Y. Wang, R.Q. Han, H.Y. Yu, D.L. Kwong. Monte Carlo simulation of p- and n-channel GOI MOSFETs by solving the quantum Boltzmann equation. IEEE Transaction on Electron Devices, 2005, 52(10): 2258-2264
87. H.Y. Yu*, R. Singanamalla, E. Simoen, X.P. Shi, J.A. Kittl, A. Lauwers, P. Absil, M. Jurczak, S. Biesemans. Ni fully GermanoSilicide for gate electrode application in pMOSFETs with HfSiON gate dielectrics. IEEE Transaction on Electron Devices, 2006, 53(6): 1398-1404
88. P. Srinivasan*, E. Simoen, R. Singanamalla, H.Y. Yu, C. Claeys, D. Misra. Gate electrode effects on low-frequency (1/f) noise in p-MOSFETs with high-kappa dielectrics. Solid-State Electronics, 2006, 50(6): 992-998 2006/6
89. A. Veloso*, T. Hoffmann, A. Lauwers, H.Y. Yu, S. Severi, E. Augendre, S. Kubicek, P. Verheyen, N. Collaert, P. Absil. Advanced CMOS device technologies for 45 nm node and below. Science and Technology of Advanced Materials, 2007, 8(3): 214-218
90. R. Singanamalla*, H.Y. Yu, B.J.O. Sullivan, J. Petry, A. Mercha, V. Paraschiv, H. Volders, S. Kubicek, K. de Meyer, S. Biesemans. Performance enhancement of Poly-Si/TiN/SiON based pMOSFETs by addition of an aluminum oxide (AlO) capping layer. Microelectronic Engineering, 2007, 84(9-10): 1865-1868J.A. Kittl*, A. Lauwers, M.A. Pawlak, A. Veloso, H.Y. Yu, S.Z. Chang, T. Hoffmann, G. Pourtois, C. Demeurisse, C. Vrancken, P.P. Absil, S. Biesemans. Modulation of the effective work function of fully-silicided (FUSI) gate stacks. Microelectronic Engineering, 2007, 84(9-10): 1857-1860
91. V.S. Chang*, L.Å. Ragnarsson, H.Y. Yu, M. Aoulaiche, T. Conard, K.M. Yin, T. Schram, J.W. Maes, S. D. Gendt, S. Biesemans. Effects of Al2O3 dielectric cap and nitridation on device performance, scalability, and reliability for advanced high-k/metal gate pMOSFET applications. IEEE Transaction on Electron Devices, 2007, 54(10): 2738-2749
92. J.F. Kang*, H.Y. Yu, C. Ren, N. Sa, H. Yang, M-F. Li, D.S.H. Chan, X.Y. Liu, R.Q. Han, D.L. Kwong. Scalability and reliability characteristics of CVD HfO2 gate dielectrics with HfN electrodes for advanced CMOS applications. Journal of The Electrochemical Society, 2007, 154 (11): H927-932
93. X.P. Wang*, A. Lim, H.Y. Yu, M.F. Li, C. Ren, W.Y. Loh, C.X. Zhu, A. Chin, A.D. Trigg, Y.C. Yeo, S. Biesemans, G.Q. Lo, D.L. Kwong. Work function tunability of refractory metal nitrides by lanthanum or aluminum doping for advanced CMOS devices. IEEE Transaction on Electron Devices, 2007, 54(11): 2871-2877
94. J.J. Yang*, X.P. Wang, C.X. Zhu, M.F. Li, H.Y. Yu, W.Y. Loh, D.L. Kwong. Enhancement of the flatband modulation of Ni-silicided gates on Hf-based dielectrics. IEEE Transaction on Electron Devices, 2008, 55(8): 2238-2245
95. A. Veloso*, H.Y. Yu, A. Lauwers, S.Z. Chang, C. Adelmann, B. Onsia, M. Demand, S. Brus, C. Vrancken, R. Singanamalla, P. Lehnen, J. Kittl, T. Kauerauf, R. Vos, B.J. O'Sullivan, S. Van Elshocht, R. Mitsuhashi, G. Whittemore, K.M. Yin, M. Niwa, T. Hoffmann, P. Absil, M. Jurczak, S. Biesemans. Achieving low-V-T Ni-FUSICMOS via lanthanide incorporation in the gate stack. Solid-State Electronics, 2008, 52(9): 1303-1311
96. B. Ling, X.W. Sun*, J.L. Zhao, S.T. Tan, Z.L. Dong, Y. Yang, H.Y. Yu, K.C. Qi. Electroluminescence from a n-ZnO nanorod/p-CuAlO2 heterojunction light-emitting diode. Physica E: Low-dimensional Systems and Nanostructures, 2009, 41(4): 635-639
97. C.W. Cheng, B. Yan, S.M. Wong, X.L. Li, W.W. Zhou, T. Yu, Z.X. Shen, H.Y. Yu, H.J. Fan*. Fabrication and SERS Performance of Silver-Nanoparticle-Decorated Si/ZnO Nanotrees in Ordered Arrays. ACS Applied Materials & Interfaces, 2010, 2(7): 1824-1828
98. Y. Wang, S.W. Liu, X.W. Sun*, J.L. Zhao, G.K. L. Goh, Q.V. Vu, H.Y. Yu. Highly transparent solution processed In-Ga-Zn oxide thin films and thin film transistors. Journal of Sol-Gel Science and Technology, 2010, 55(3): 322-327
99. J.S. Li, H.Y. Yu*, S.M. Wong, G. Zhang, G.Q. Lo, D.L. Kwong. Si nanocone array optimization on crystalline Si thin films for solar energy harvesting. Journal of Physics D: Applied Physics, 2010, 43(25): 255101
100. F. Wang, H.Y. Yu*, X.C. Wang, J.S. Li, X.W. Sun, M.F. Yang, S.M. Wong, H.Y. Zheng. Mask less fabrication of large scale Si nanohole array via laser annealed metal nanoparticles catalytic etching for photovoltaic application. Journal of Applied Physics, 2010, 108(2): 024301
101. X.C. Wang*, H.Y. Zheng, C.W. Tan, F. Wang, H.Y. Yu, K.L. Pey. Femtosecond laser induced surface nanostructuring and simultaneous crystallization of amorphous thin silicon film. Optics Express, 2010, 18(18): 19379-19385
102. M.F. Yang*, H.Y. Yu*, X.W. Sun*, J.S. Li, X.C. Li, L. Ke, J.H. Hu, F. Wang, Z.H. Jiao. Periodic silicon nanocone arrays with controllable dimensions prepared by two-step etching using nanosphere lithography and NH4OH/H2O2 solution. Solid State Communications, 2011, 151(2): 127-129
103. Y. Wang*, X.W. Sun, G.K.L. Goh, H.V. Demir, H.Y. Yu. Influence of Channel Layer Thickness on the Electrical Performances of Inkjet-Printed In-Ga-Zn Oxide Thin-Film Transistors. IEEE Transaction on Electron Devices, 2011, 58(2): 480-485
104. M. Shakerzadeh, N. Xu, M. Bosman, B.K. Tay, X. Wang, E.H.T. Teo, H. Zheng, H.Y. Yu. Field emission enhancement and microstructural changes of carbon films by single pulse laser irradiation. Carbon, 2011, 49(3), 1018-1024
105. F. Wang, H.Y. Yu*, J.S. Li, S.M. Wong, X.W. Sun, X.C. Wang, H.Y. Zheng. Design guideline of high efficiency crystalline Si thin film solar cell with nanohole array textured surface. Journal of Applied Physics, 2011, 109(8): 084306
106. Y. Sun, H.Y. Yu*, N. Singh, E. Gnani, G. Baccarani, K. C. Leong, G.Q. Lo, D. L. Kwong. Vertical-Si-Nanowire-Based Nonvolatile Memory Devices With Improved Performance and Reduced Process Complexity. IEEE Transaction on Electron Devices, 2011, 58(5): 1329-1335
107. L. Wu, H.Y. Yu*, K.S. Yew, J.S. Pan, W.J. Liu, T.L. Duan.Multideposition Multiroom-Temperature Annealing via Ultraviolet Ozone for HfZrO High-kappa and Integration With a TiN Metal Gate in a Gate-Last Process. IEEE Transaction on Electron Devices, 2011, 58(7): 2177-2181
108. W. Cao*, C.J. Yao, G.F. Jiao, D.M. Huang, H.Y. Yu, M.F. Li. Improvement in Reliability of Tunneling Field-Effect Transistor With p-n-i-n Structure. IEEE Transaction on Electron Devices, 2011, 58(7): 2122-2126
109. S.M. Wong, H.Y. Yu*, Y.L. Li, J.S. Li, X.W. Sun, N. Singh, P.G.Q. Lo, D.L. Kwong. Boosting Short-Circuit Current With Rationally Designed Periodic Si Nanopillar Surface Texturing for Solar Cells. IEEE Transaction on Electron Devices, 2011, 58(9): 3224-3229
110. M.F. Yang, X.W. Sun*, H.Y. Yu, J.S. Li, J.H. Hu. Low temperature polycrystalline silicon film formation by metal induced crystallization with nickel salt derived by ultrasonic spray pyrolysis. Crystal Research and Technology, 2011, 46(9): 935-938
111. Y.L. Li, H.Y. Yu*, J.S. Li, S.M. Wong, X.W. Sun, X.L. Li, C.W. Cheng, H.J. Fan*, J. Wang, N. Singh, P. Lo, D.L. Kwong. Novel Silicon Nanohemisphere-Array Solar Cells with Enhanced Performance. Small, 2011, 7(22): 3138-3142 (cover image of Small)
112. M.F. Li*, X.P. Wang, C. Shen, J.J. Yang, J.D. Chen, H.Y. Yu, C.X. Zhu, D.M. Huang. Some issues in advanced CMOS gate stack performance and reliability. Microelectronic Engineering, 2011, 88(12): 3377-3384 2011/12
113. J.S. Li, H.Y. Yu*, Y.L. Li. Aligned Si nanowire-based solar cells. Nanoscale, 2011, 3(12): 4888-4900 (Top ten most-read articles in December)
114. Y.S. Chen*, J.F. Kang*, B. Chen, B. Gao, L.F. Liu*, X.Y. Liu, Y.Y. Wang, L. Wu, H.Y. Yu, J.Y. Wang, Q. Chen, E.G. Wang. Microscopic mechanism for unipolar resistive switching behavior of nickel oxides. Journal of Physics D-Applied Physics, 2012, 45(6): 065303
115. L. Hong, X.C. Wang, Rusli, H. Wang, H.Y. Zheng, H.Y. Yu*. Crystallization and surface texturing of amorphous-Si induced by UV laser for photovoltaic application. Journal of Applied Physics, 2012, 111(4): 043106
116. Z. Fang, H.Y. Yu*, J.A. Chroboczek, G. Ghibaudo, J. Buckley, B. de Salvo, X. Li, D.L. Kwong. Low-Frequency Noise in Oxide-Based (TiN/HfOx/Pt) Resistive Random Access Memory Cells. IEEE Transaction on Electron Devices, 2012, 59(3): 850-853
117. Z.R. Wang, H.Y. Yu*, X.A. Tran, Z. Fang, J.H. Wang, H.B. Su. Transport properties of HfO2-x based resistive-switching memories. Physical Review B, 2012, 85(19): 195322
118. Z.R. Wang, A.Y. Du, L. Wu, Z. Fang, X.A. Tran, W.J. Liu, W.G. Zhu, H.Y. Yu*. Highly Uniform, Self-Compliance, and Forming-Free ALD HfO2-Based RRAM With Ge Doping. IEEE Transactions on Electron Devices, 59(4): 1203-1208
119. Z.R. Wang, V. Tjoa, L. Wu, W.J. Liu, Z. Fang, X.A. Tran, J. Wei, W.G. Zhu, H.Y. Yu*. Mechanism of Different Switching Directions in Graphene Oxide Based RRAM. Journal of the Electrochemical Society, 2012, 159(6): K177-182
120. J.S. Li*, H.Y. Yu*, Y.L. Li. Solar energy harnessing in hexagonally arranged Si nanowire arrays and effects of array symmetry on optical characteristics. Nanotechnology, 2012, 23(19): 194010
121. W.J. Liu, X.W. Sun, X.A. Tran, Z. Fang, Z. Wang, F. Wang, L. Wu, J.F. Zhang, J. Wei, H.L. Zhu, H.Y. Yu*. Vth Shift in Single-Layer Graphene Field-Effect Transistors and Its Correlation With Raman Inspection. IEEE Transactions on Device and Materials Reliability, 2012. 12(2): 478-481
122. Q.G. Du, G. Alagappan, H.T. Dai, H.V. Demir, H.Y. Yu, X.W. Sun*, C.H. Kam. UV-blocking ZnO nanostructure anti-reflective coatings. Optics Communications, 2012, 285(13-14): 3238-3241
123. L. Hong, Rusli, X.C. Wang, H.Y. Zheng, L.N. He, X.Y. Xu, H. Wang, H.Y. Yu. Design principles for plasmonic thin film GaAs solar cells with high absorption enhancement. Journal of Applied Physics, 2012, 112(5): 054326
124. L. Hong*, Rusli, H.Y. Yu. Surface Nanostructure Optimization for GaAs Solar Cell Application. Japanese Journal of Applied Physics, 2012, 51(10): 1143
125. Chen, YS ; Kang, JF, Chen, B , Gao, B, Liu, LF, Liu, XY , Wang, YY, Wu, L, Yu, HY , Wang, JY. Microscopic mechanism for unipolar resistive switching behaviour of nickel oxides. Journal of Physics D-Applied Physics. 2012, 45(6): 065303
126. X.A. Tran*, W. Zhu, W.J. Liu, Y.C. Yeo, B.Y. Nguyen, H.Y. Yu*. Self-Selection Unipolar HfOx-Based RRAM. IEEE Transactions on Electron Devices, 2013, 60(1): 391-395
127. Z. Fang*, H.Y. Yu, W. J. Fan, G. Ghibaudo, J. Buckley, B. DeSalvo, X. Li, X.P. Wang, G.Q. Lo, D.L. Kwong. Current Conduction Model for Oxide-Based Resistive Random Access Memory Verified by Low-Frequency Noise Analysis. IEEE Transactions on Electron Devices, 2013, 60(3): 1272-1275
128. J.S. Li*, Y.L. Li, D.Y. He, H.Y. Yu, X.B. Yan. Design and mechanism of cost-effective and highly efficient ultrathin (< 0.5 mu m) GaAs solar cells employing nano/micro-hemisphere surface texturing. AIP Advances, 3(3): 032145
129. S.M. Yu*, B. Gao, Z. Fang, H.Y. Yu, J.F. Kang, H.S.P. Wong. A Low Energy Oxide-Based Electronic Synaptic Device for Neuromorphic Visual Systems with Tolerance to Device Variation. Advanced Materials, 2013, 25(12): 1774-1779
130. B. Gao*, B. Chen, F.F. Zhang, L.F. Liu, X.Y. Liu, J.F. Kang, H.Y. Yu, B. Yu. A Novel Defect-Engineering-Based Implementation for High-Performance Multilevel Data Storage in Resistive Switching Memory. IEEE Transactions on Electron Devices, 2013, 60(4): 1379-1383
131. X. Tong*, W.J. Wu, Z. Liu, X.A. Tran, H.Y. Yu, Y.C. Yeo, Switching Model of TaOx-Based Nonpolar Resistive Random Access Memory, Japanese Journal of Applied Physics, 2013, 52(4): Unsp 04cd03
132. L. Hong*, X.C. Wang, H.Y. Zheng, L. He, H. Wang, H.Y. Yu, Rusli, Femtosecond laser induced nanocone structure and simultaneous crystallization of 1.6 mu m amorphous silicon thin film for photovoltaic application, Journal of Physics D-Applied Physics, 2013, 46(19): 195109
133. W.J. Liu*, X.W. Sun, X.A. Tran, Z. Fang, Z.R. Wang, L. Wu, J.F. Zhang, J. Wei, H.L. Zhu, H.Y. Yu*, Observation of the Ambient Effect in BTI Characteristics of Back-Gated Single Layer Graphene Field Effect Transistors, IEEE Transactions on Electron Devices, 2013, 60(8): 2682-2686
134. L. Hong, Rusli*, X.C. Wang, H.Y. Zheng, H. Wang, H.Y. Yu, Design guidelines for slanting silicon nanowire arrays for solar cell application, Journal of Applied Physics, 2013, 114(8): 084303
135. L. Hong*, Rusli, X.C. Wang, H.Y. Zheng, H. Wang, H.Y. Yu, Design guideline of Si nanohole/PEDOT:PSS hybrid structure for solar cell application, Nanotechnology, 2013, 24(35): 355301
136. S.M. Yu, B. Gao, Z. Fang, H.Y. Yu, J.F. Kang, H.S.P. Wong*, Stochastic learning in oxide binary synaptic device for neuromorphic computing. Frontiers in Neuroscience, 2013, 7: 186
137. Z.R. Wang, H.Y. Yu*, H.B. Su. The transport properties of oxygen vacancy-related polaron-like bound state in HfOx. Scientific Reports, 2013, 3: Unsp 3246
138. L. Hong, Rusli, X.C. Wang*, H.Y. Zheng, H. Wang, H.Y. Yu, Femtosecond laser fabrication of large-area periodic surface ripple structure on Si substrate, Applied Surface Science, 297: 134-138
139. L. Hong*, Rusli, X.C. Wang, H.Y. Zheng, H. Wang, H.Y. Yu*, Design Guidelines for Si(111) Inclined Nanohole Arrays in Thin-Film Solar Cells, IEEE Transactions on Nanotechnology, 2014, 13(3): 431-436
140. Lei Hong, Rusli, Xincai Wang, Hongyu Zheng, Hao Wang, Xiaoyan Xu, Hongyu Yu*. Light trapping in hybrid nanopyramid and nanohole structure silicon solar cell beyond the Lambertian limit. Journal of Applied Physics, 2014, 116(7): 074310
141. Lei Hong*, Rusli, Xincai Wang, Hongyu Zheng, Jianxiong Wang, Hao Wang, Hongyu Yu. Optical absorption enhancement in a Si nanohole structure with hexagonal unit cell for solar cell application, Nanotechnology, 2014, 25(41): 415303
142. Lei Hong, Rusli*, Xincai Wang, Hongyu Zheng, Hao Wang, Hongyu Yu. Simulated optical absorption enhancement in random silicon nanohole structure for solar cell application. Journal of Applied Physics, 2014, 116(19): 194302
143. Y.B. Zhang, H.L. Zhu*, H. Wu, Y.K. Zhang, Z.G. Zhao, J. Zhong, H. Yang, Q.Q. Liang, D.H. Wang, J.F. Li, C. Jia, J.B. Liu, Y.Y. Zhao, C.L. Li, L.K. Meng, P.Z. Hong, J.J. Li, Q. Xu, J.F. Gao, X.B. He, Y.H. Lu, Y. Zhang, T. Yang, Y. Wang, H.S. Cui, C. Zhao, H.X. Yin, H.C. Zhong, H.Z. Yin, J. Yan, W.W. Wang, D.P. Chen, H.Y. Yu, S. Yang, T.C. Ye, Planar Bulk MOSFETs With Self-Aligned Pocket Well to Improve Short-Channel Effects and Enhance Device Performance, IEEE Transactions on Electron Devices, 2015, 62(5): 1411-1418
144. Lei. Hong*, Rusli, Xincai Wang, Hongyu Zheng, Jianxiong Wang, Hao Wang, Hongyu Yu. Si/PEDOT:PSS hybrid solar cells incorporated with silver plasmonic nanospheres. Thin Solid Films, 2016, 599: 37-41
145. Yiwen Li, Yulong Chen, Mingxia Qiu, Hongyu Yu, Xinhai Zhang, Xiaowei Sun*, Rui Chen*. Preparation of Aluminum Nanomesh Thin Films from an Anodic Aluminum Oxide Template as Transparent Conductive Electrodes, Scientific Reports, 2016, 6: 20114
146. Bin Dong, Jie Lin, Ning Wang, Lingli Jiang, Zongdai Liu, Xiaoyan Hu, Kai Cheng, Hongyu Yu*. Trap behaviours characterization of AlGaN/GaN high electron mobility transistors by room-temperature transient capacitance measurement. Aip Advances, 2016, 6(10): 095021
147. Hui Wang, Ning Wang, Lingli Jiang, Haiyue Zhao, Xinpeng Lin, Hongyu Yu*. Study of the enhancement-mode AlGaN/GaN high electron mobility transistor with split floating gates. Solid State Electronics, 2017, 137: 52-57
148. Tianli Duan, Jisheng Pan, Ning Wang, Kai Cheng, Hongyu Yu*. Investigation on Surface Polarization of Al2O3-capped GaN/AlGaN/GaN Heterostructure by Angle-Resolved X-ray Photoelectron Spectroscopy. Nanoscale Research Letters, 2017,12: 499
149. Jian Li, Kai He, Zhihui Zhou, Hao Huang, Lei Zhang*, Chaogang Lou, Hongyu Yu*. Influence of feedstock concentration on tetragonality and particle size of hydrothermally synthesized barium titanate powders. Ceramics International. 2017, 43(17): 14813-14817
150. Hui Wang, Ning Wang, Lingli Jiang, Xinpeng Lin, Haiyue Zhao, Hongyu Yu*. A novel enhancement mode AlGaN/GaN high electron mobility transistor with split floating gates. Chinese Physics B, 2017, 26(4):420-424.
151. Bu S T, Huang D M*, Jiao G F, Yu HY, M.F. Li. Low Frequency Noise in Tunneling Field Effect Transistors. Solid-State Electronics, 2017, 137: 95-101
152. Ning Wang, Hui Wang, Xinpeng Lin, Yongle Qi, Tianli Duan, Lingli Jiang, Elina Iervolino, Kai Cheng, Hongyu Yu*. Investigation of AlGaN/GaN HEMTs degradation with gate pulse stressing at cryogenic temperature. Aip Advances, 2017, 7(9): 095317
153. Wang, H. and Jiang, L. L. and Wang, N. and Lin, X. P. and Yu, H. Y. The enhancement mode AlGaN/GaN high electron mobility transistor based on charge storage. IEEE,2017, 662-665
154. Huan, Y. W. and Sun, S. M. and Gu, C. J. and Liu, W. J. and Ding, S. J. and Yu, H. Y. and Xia, C. T. and Zhang, D. W. Recent Advances in beta-Ga2O3-Metal Contacts. Nanoscale Research Letters,2018,13(10)
155. Jacobs-Gedrim, Robin B. and Murphy, Michael T. and Yang, Fan and Jain, Nikhil and Shanmugam, Mariyappan and Song, Eui Sang and Kandel, Yudhister and Hesamaddin, Parham and Yu, Hong Yu and Anantram, M. P. and Janes, David B. and Yu, Bin. Reversible phase-change behavior in two-dimensional antimony telluride (Sb2Te3) nanosheets. Applied Physics Letters,2018,112(13)
156. Qi, Yongle and Zhu, Yumeng and Zhang, Jiang and Lin, Xinpeng and Cheng, Kai and Jiang, Lingli and Yu, Hongyu. Evaluation of LPCVD SiNx Gate Dielectric Reliability by TDDB Measurement in Si-Substrate-Based AlGaN/GaN MIS-HEMT. Ieee Transactions on Electron Devices,2018,65(5): 1759-1764
157. Santagata, F. and Sun, J. W. and Iervolino, E. and Yu, H. Y. and Wang, F. and Zhang, G. Q. and Sarro, P. M. and Zhang, G. Y. System in package (SiP) technology: fundamentals, design and applications. Microelectronics International,2018,35(4):231-243
158. Sokolovskij, R. and Zhang, J. and Iervolino, E. and Zhao, C. H. and Santagata, F. and Wang, F. and Yu, H. Y. and Sarro, P. M. and Zhang, G. Q. Hydrogen sulfide detection properties of Pt-gated AlGaN/GaN HEMT-sensor. Sensors and Actuators B-Chemical,2018,274: 636-644
159. Zhang, Jian and Sokolovskij, Robert and Chen, Ganhui and Zhu, Yumeng and Qi, Yongle and Lin, Xinpeng and Li, Wenmao and Zhang, Guo Qi and Jiang, Yu-Long and Yu, Hongyu. Impact of high temperature H-2 pre-treatment on Pt-AlGaN/GaN HEMT sensor for H2S detection. Sensors and Actuators B-Chemical,2019,280: 138-143

Dr. Bindeshwar Singh

Assistant ProfessorDepartment of Electrical EngineeringKamla Nehru Institute of Technology (KNIT)Sultanpur-228118, UP, India
Bindeshwar Singh received the M.Tech. in electrical engineering from the Indian Institute of Technology, Roorkee, in 2001. He received Ph. D. Degree from IIT (ISM) Dhanbad, Jharkhand, India in 2017. His research interests are in Coordination of FACTS controllers, DGs and Power system Engg. Currently, he is an Assistant Professor with Department of Electrical Engineering, Kamla Nehru Institute of Technology, Sultanpur, U.P., and India, where he has been since August’2009.
• Power System Modeling
• Power System Load Fore-Costing.
• Power System Restructuring /Deregulation.
• Optimal Power Dispatch and Security Analysis.
• Power System Dynamics
• Power System Operation, Control, and Planning.
• Flexible AC Transmission Systems (FACTS), Static and Dynamic Modeling of FACTS Controllers.
• Placement of FACTS controllers in Multi-Machine Power System Environments
• Optimal Location of Distributed Generation (DG) by AI Techniques in Power Systems
• Control Coordination of FACTS Controllers in multi-machine Power System Environments
• Application of Fuzzy Logic, Genetic Algorithms, and Artificial Neural Networks to emerging power systems
• Application of PMUs to Power System Networks
• Power Quality Problems
• Vector Control and DTC Method for Speed Control of Three-Phase Induction Motors
• PWM/SVPMW techniques for Speed Control of Three-Phase Induction Motors
• Application of Matrix Converter and Z-source in Three Phase Induction Motors
Fifteen National Power Systems Conference 2008, Department of Electrical Engineering, IIT Bombay (Best paper awards)
16th National Power Systems Conference, 15th-17th December 2010, Department of Electrical Engineering, Univ. College of Engg., Osmania University, Hyderabad, A.P, INDIA.
All India Rank–105 in GATE-2001.
Awarded ‘GATE Scholarship’ during M. Tech. course
Best Teacher Award at DR. KNMIET, Modinagar, Ghaziabad
Best Teacher Award at RKGIET, Ghaziabad
Best Teacher Award at KEC, Ghaziabad
Best Teacher Award at KNIT, Sultanpur
(1 JULY 2009-------30 JUNE 2010)
[1] Bindeshwar Singh, N.K.Sharma, and A. N. Tiwari, “A Comprehensive Survey of Optimal Placement and Coordinated Control Techniques of FACTS Controllers in Multi-Machine Power System Environments,” International journal of Electrical Engineering and Technology, JEET, (Korean Institute of Electrical Engineers), Vol. 5, No. 1, March 2010, pp. 79-101 [THOMSON REUTERS-SCI]. (ISSN No: 1975-0102). Refereed, Peer-Reviewed Journal.
[2] Bindeshwar Singh, N.K.Sharma, A. N. Tiwari, K S. Verma, and S. N. Singh “Applications of Phasor Measurement Units (PMUs) in Electric Power System Networks Incorporated with FACTS Controllers” International Journal of Engineering, Science and Technology (IJEST), Denmark Technical University, Denmark, Vol. 2 , No. 3 , pp. 1-7, June-July 2010. [ DOAJ] (ISSN: 2141-2820). Refereed, Peer-Reviewed Journal.
[3] Bindeshwar Singh, N.K.Sharma, and A. N. Tiwari, “A Comprehensive Survey of Optimal Placement and Coordinated Control Techniques of FACTs Controllers in Multi-Machine Power System Environments: A state-of-the-art” International journal of Power System Optimizations (IJPSO), Vol. 2, No. 1, Jan.-June, 2010, pp. 105-128. (ISSN: 0975-458X). Refereed, Peer-Reviewed Journal.
[4] Bindeshwar Singh, N.K.Sharma, and A. N. Tiwari, “Preventation of Voltage Instability by Using FACTS Controllers in Power Systems: A Literature Survey,” International journal of Engineering Science and Technology (IJEST), Vol. 2, No. 4, April 2010, pp. 756-768. (ISSN: 0975-5462; p-ISSN: 2278-9510).Refereed, Peer-Reviewed Journal.
[5] Bindeshwar Singh, N.K.Sharma, A. N. Tiwari, K.S. Verma, and Deependra Singh “A Status review of Incorporation of FACTS Controllers in Multi-Machine Power Systems for Enhancement of Damping of Power System Oscillations and Voltage Stability,” International journal of Engineering Science and Technology (IJEST), Vol. 2, No. 6, June 2010, pp. 1507-1525. (e-ISSN: 0975-5462; p-ISSN: 2278-9510). Refereed, Peer-Reviewed Journal.
(1 JULY 2010-------30 JUNE 2011)
[1] Bindeshwar Singh, N.K.Sharma, A. N. Tiwari, “A Study on Enhancement of Loadability of Large-Scale Emerging Power Systems by Using FACTS Controllers,” International journal of Computer Science and Engineering (IJCSE), Vol. 2, No. 5, August 2010, pp. 1893-1903. [DOAJ] (e-ISSN: 0975-3397; p-ISSN: 2229-5631). Refereed, Peer-Reviewed Journal.
[2] Bindeshwar Singh, N.K.Sharma, A. N. Tiwari, and S.P.Singh,“Incorporation of FACTS controllers in Newton Rapshon Load Flow for Power Flow Operation, Control, and Planning Point of View: A Comprehensive Survey” International journal of Computer Science and Engineering (IJCSE), Vol. 2, No. 6, September 2010, pp. 2117-2124. [DOAJ]( e-ISSN: 0975-3397; ISSN: 2229-5631). Refereed, Peer-Reviewed Journal.
[3] Bindeshwar Singh, N.K.Sharma, and A. N. Tiwari, “Classification of Coordinated Control Techniques of FACTS Controllers in Emerging Power Systems: A Review,” International journal of Engineering and Techno Science (IJETS), Vol. 1, Issue 1, September-October 2010, pp. 18-34. (e-ISSN: 0976-9293). Refereed, Peer-Reviewed Journal.
[4] Bindeshwar Singh, S.P.Singh, J. Singh, and Mohd. Naim,“ PERFORMANCE EVALUATION OF THREE-PHASE INDUCTION MOTOR DRIVE FED FROM Z-SOURCE INVERTER” International journal of Computer Science and Engineering (IJCSE), Vol. 3, No.3, March, 2011, pp. 1277-1289. [DOAJ] (e-ISSN: 0975-3397; p-ISSN: 2229-5631). Refereed, Peer-Reviewed Journal.
[5] Bindeshwar Singh, K.S. Verma, Deependra Singh, and S.N. Singh, “Applications of PMUs in an Integrated Power System Environment with FACTS Controllers: A Survey,” J. Automation & System Engineering (JASE), Vol. 5, No. 1, March 2011, pp. 25-57. ESR-Group [ DOAJ] (ISSN: 1112-8542). Refereed, Peer-Reviewed Journal.
[6] Mohd. Naim, Bindeshwar Singh, Jaswant Singh, ‘‘Improvement of Power Factor and Reduction of Harmonics in Threephase Induction Motor by PWM Techniques: A Comprehensive Literature Survey’’, International journal of Engineering and Techno Science (IJETS), Vol 2 (3), pp. 257-269, 2011. (e-ISSN: 0976-9293). Refereed, Peer-Reviewed Journal.
[7] Ravindra Kumar, Surya Prakash Singh, Bindeshwar Singh, and Ravi Prakash Vishvakarma, “Characterization of Voltage Sags and its Mitigation Using Custom Power Devices in Emerging Power System,” Buletin Teknik Elektro dan Informatika (Bulletin of Electrical Engineering and Informatics) Journal, Vol. 1, No. 2, June, 2011, pp. 69-88. [SCI] (ISSN: 2089-3191). Refereed, Peer-Reviewed Journal.
[8] Jaswant Singh, B. Singh, S.P. Singh, and Mohd Naim, “Performance Evaluation of Direct Torque Control with Permanent Magnet Synchronous Motor,” Samriddhi, 2011S-JPSET: [ DOAJ] (ISSN: 2229-7111), Vol. 2, Issue 2, pp.21-30, June 2011. Refereed, Peer-Reviewed Journal.
(1 JULY 2011-------30 JUNE 2012)
[1] Ravindra kumar, Surya Prakash Singh, K.S. Verma, Bindeshwar Singh, and Jaswant Singh, “Voltage Sags Characterization and Its Impact Assessment on Equipment Behaviour,” International journal of Engineering and Techno Science (IJETS), Vol. 2, Issue 4, August-September 2011, pp. 302-313. . (e-ISSN: 0976-9293). Refereed, Peer-Reviewed Journal.
[2] Ravindra kumar, Surya Prakash Singh, K.S. Verma, Bindeshwar Singh, and Jaswant Singh, “Voltage Sags Characterization and Their Mitigation using custom power devices,” International journal of Engineering and Techno Science (IJETS), Vol. 2, Issue 4, August-September 2011, pp. 320-335. . (e-ISSN: 0976-9293). Refereed, Peer-Reviewed Journal.
[3] Bindeshwar Singh, “Utilities of Differential Algebraic Equations (DAE) Model of SVC and TCSC for Operation, Control, Planning & Protection of Power System Environments,” International Journal of Reviews in Computing (IJRIC), September 2011, Vol. 7, No. 6, pp. 55-63. [SCOPUS] (ISSN: 2076-3328). Refereed, Peer-Reviewed Journal.
[4] Bindeshwar Singh, K.S. Verma, Deependra Singh, and S.N. Singh “A Novel Approach for Optimal Placement of Distributed Generation & FACTS Controllers in Power Systems: An Overview and Key Issues,” International Journal of Reviews in Computing (IJRIC), September 2011, Vol. 7, No. 5, pp. 29-54. [SCOPUS] (ISSN: 2076-3328). Refereed, Peer-Reviewed Journal.
[5] Bindeshwar Singh, Padma Chaturvedi, S.K. Sinha, A.S.Pandey, And S.P. Singh, “Enhancement of the Performance Parameters of Three Phase Induction Motor Using Multilevel Converters: A Literature Survey,” International Journal of Reviews in Computing (IJRIC), October-December 2011, Vol. 8, No. 5, pp. 46-68. [SCOPUS] (ISSN: 2076-3328). Refereed, Peer-Reviewed Journal.
[6] Bindeshwar Singh, K.S. Verma, Deependra Singh, C.N. Singh, Archna Singh, Ekta Agarwal, Rahul Dixit & Baljiv Tyagi, “Introduction to FACTS Controllers: A Critical Review,” International Journal of Reviews in Computing (IJRIC), OctoberDecember 2011, Vol. 8, No.3, pp. 69-80. [SCOPUS] (ISSN: 2076-3328). Refereed, Peer-Reviewed Journal.
[7] Bindeshwar Singh, Indresh Yadav, and Dilip kumar, “Mitigation of Power Quality Problems by FACTS Controllers in an Integrated Power Systems: A Comprehensive Survey,” International Journal of Reviews in Computing (IJRIC), OctoberDecember 2011, Vol. 8, No.6, pp. 69-86. [SCOPUS] (ISSN: 2076-3328). Refereed, Peer-Reviewed Journal.
[8] Bindeshwar Singh, “Introduction to FACTS controllers in Wind Power Farms: A Technological Review,” International
Journal of Advanced Renewable Energy Research, Vol. 2, No. 2, March 2012, pp. 166-212. Refereed, Peer-Reviewed Journal.
[9] Jaswnt Singh, Bindeshwar Singh, S.P. Singh, and Rahul Dixit, “Performance Evaluation of PMSM drives using DTC Techniques,” International Journal of Reviews in Computing, IJRIC, Vol.9, Issue 2, pp. 1-11, April 2012. [SCOPUS] (ISSN: 2076-3328).
[10]Jaswant Singh, B. Singh, S.P. Singh, ‘‘Performance Evaluation of Direct Torque Control with Permanent Magnet Synchronous Motor’’, Buletin Teknik Elektro dan Informatika (Bulletin of Electrical Engineering and Informatics) Journal, Vol. 1, No. 2, pp. 165-178, June 2012. (ISSN: 2089-3191). Refereed, Peer-Reviewed Journal.
[11]Bindeshwar Singh, K.S. Verma, Deependra Singh, and S.N. Singh, “A Novel Multi-Objective Approach For Planning Of DGs In Emerging Power Systems,” International Journal of Applied Engineering Research and Development (IJAERD), Vol. 1, No.1, December 2011. [SCOPUS] (e-ISSN: 2250-1584; p-ISSN-2278-9383). Peer-Reviewed Journal.
[12]Bindeshwar Singh, Indresh Yadav, and Dilip Kumar “Mitigation of Power Quality Problems Using FACTS Controllers in an Integrated Power System Environment: A Comprehensive Survey” International Journal of Computer Science and Artificial Intelligence (IJCSAI), Vol.1, Issue 1. pp. 1-12, December, 2011. [ DOAJ] (e-ISSN:2226-4469; p-ISSN:2226-4450). PeerReviewed Journal.
[13]Bindeshwar Singh, Shah Alam Malik , Ankit Kr. Pandey, and Vikas Shukla “Enhancement of Performance Parameters of Three Phase Induction Motor by Current Source Inverter: An overview and key issues,” International Journal of Computer Science and Artificial Intelligence (IJCSAI), Vol.1, Issue 1., pp. 18-26, December 2011. [ DOAJ] (e-ISSN:2226-4469; pISSN:2226-4450; ). Peer-Reviewed Journal.
(1 JULY 2012-------30 JUNE 2013)
[1] Bindeshwar Singh, Surya Prakash Singh, Manvendra Singh, Rahul Dixit, Nupur Mittal, and Aanchal Baranwal “STAND ALONE POWER GENERATION BY THREE PHASE ASYNCHRONOUS GENERATOR: A COMPREHENSIVE SURVEY,” International Journal of Reviews in Computing, Vol. 10, No. 5, pp. 36-51, July 2012, [SCOPUS] (ISSN: 2076-3328). Refereed, Peer-Reviewed Journal.
[2] Bindeshwar Singh, K.S. Verma, Deependra Singh, Surya Prakash Singh, Manvendra Singh, Rahul Dixit, Nupur Mittal, and Aanchal Baranwal “MULTI-LEVEL INVERTER: A LITERATURE SURVEY ON TOPOLOGIES AND CONTROL
STRATEGIES ,”International Journal of Reviews in Computing, Vol. 10, No. 1, pp. 1-16, July 2012, [SCOPUS] (ISSN: 2076-3328). Refereed, Peer-Reviewed Journal.
[3] Bindeshwar Singh, K.S. Verma, Pooja Mishra, Rashi Maheshwari, Utkarsha Srivastava and Aanchal Baranwal “Introduction to FACTS Controllers: A Review,” International Journal of Automation and Power Engineering (IJAPE), Vol. 1, No. 9, USA Journal, December 2012, 2013, pp. 193-234. [DOAJ] (e-ISSN: 2161-5055; p-ISSN: 2161-6442). Refereed, Peer-Reviewed Journal.
[4] Garima Singh, and Bindeshwar Singh, “Application of Artificial Intelligence Computational Techniques in Mechanical Engineering Fields: A Survey, “IJMSER, Vol. 3, No. 2, July-December 2012, pp. 161-203. Refereed, Peer-Reviewed Journal.
(1 JULY 2013-------30 JUNE 2014)
[1] Bindeshwar Singh, R. P. Payasi, K. S. Verma, Varun Kumar, Satayarth Gangwar, “Design of controllers PD, PI, and PID for speed control of DC motor using IGBT based chopper,” German Journal of Renewable and Sustainable Energy Research (GJRSER), Vol. 1, Issue.1, pp. 29-49, July 2013. [ DOAJ] (ISSN: 1112-8542). Refereed, Peer-Reviewed Journal.
[2] Bindeshwar Singh, Abhiruchi Srivastava and Manisha, “Applications of FACTS Controllers,” J. Automation & Systems Engineering, Vol. 8, No.1, June 2014: pp. 1-24. [ DOAJ] (ISSN: 1112-8542). Refereed, Peer-Reviewed Journal.
(1 JULY 2014-------30 JUNE 2015)
[1] Bindeshwar Singh, V. Mukherjee, and Prabhakar Tiwari, “A Survey on Impact Assessment of DG and FACTS Controllers in Power Systems,” Renewable and Sustainable Energy Reviews, Elsvier Journal, Vol. 42, No.5, Feb. 2015: 846-882 [THOMSON REUTERS-SCI]. (ISSN No: 1364-0321). Refereed, Peer-Reviewed Journal.
[2] Bindeshwar Singh, Dr. Deependra Singh, Ashok Kumar, and Mohtasib Hasan, “Enhancement of PQ parameters in Distribution System by DGs: A Taxonomical Review,” J. Automation & Systems Engineering, Vol. 9, No. 1, 2015: 144-155. [DOAJ] (ISSN: 1112-8542). Refereed, Peer-Reviewed Journal.
[3] Bindeshwar Singh, Dr. Deependra Singh, Ashok Kumar, “Enhancement of PQ Parameters in Distribution System by DGs with Load Models Using Exhaustive Search Value Method,” European Journal of Advances Engineering and Technology, Vol. 2, No. 8, 2015: 65-76. [ DOAJ] (ISSN: 2394-685X).
[4] Bindeshwar Singh, Pavan Prakash Gupta, Rajiv Kumar and Ashok Kumar, “Electrical Power Quality Problem: A key Issues, Challenges & Opportunities,” J. Automation & Systems Engineering Vol. 9, No. 1, 2015: pp. 37-53. [ DOAJ] (ISSN: 1112-8542). Refereed, Peer-Reviewed Journal.
(1 JULY 2015-------30 JUNE 2016)
[1] Bindeshwar Singh, V. Mukherjee, and Prabhakar Tiwari, “Genetic algorithm for impact assessment of optimally placed distributed generations with different load models from minimum total MVA intake viewpoint of main substation,” Renewable and Sustainable Energy Reviews, Elsvier Journal, Vol. 57, No.1, Jan. 2016, pp. 1611-1636 [THOMSON REUTERS-SCI]. (ISSN No: 1364-0321). Refereed, Peer-Reviewed Journal.
[2] Bindeshwar Singh, V. Mukherjee, and Prabhakar Tiwari, “Genetic algorithm optimized impact assessment of optimally placed DGs and FACTS Controller with different load models from minimum total real power loss viewpoint,” Energy and Building, Elsvier Journal, Vol. 126, No.2, May. 2016: 194-219. [THOMSON REUTERS-SCI]. (ISSN No: 0378-7788). Refereed, Peer-Reviewed Journal.
(1 JULY 2016-------30 JUNE 2017)
[1] Bindeshwar Singh, D.Singh, R.P. Payasi, Janmay Sharma, MK Yadav and Charitpal “A Taxonomical Review on Distributed Generation Planning,” European Journal of Advances in Engineering & Technology, July 2016, 3(4), pp. 23-38. Refereed, Peer-Reviewed Journal.
[2] Bindeshwar Singh and Jaymayjay Sharma, “A review on distributed generation planning,” Renewable and Sustainable Energy Reviews, Elsvier Journals, Vol. 76, March 2017, pp. 529-544 [THOMSON REUTERS-SCI]. (ISSN No: 1364-0321). Refereed, Peer-Reviewed Journal.
[3] Bindeshwar Singh, Charitra Pal, V. Mukherjee, P. Tiwari, and Manish Kumar Yadav “Distributed Generation Planning from Power system Performannces Viewpoints: A Taxonomical Survey, Renewable and Sustainable Energy Reviews, Elsvier Journals, Vol. 75, November 2016, pp. 1472-1492 [THOMSON REUTERS-SCI]. (ISSN No: 1364-0321). Refereed, Peer-Reviewed Journal.
[4] Bindeshwar Singh, V. Mukherjee, and Prabhakar Tiwari, “GA based multi-objective optimization for distributed generations planning with DLMs in distribution power systems,” Journal of Electrical Systems and Information Technology, Vol. 4, Issue 1, October 2016, pp. 62-94. [THOMSON REUTERS]. (ISSN No: 2314-7172). Refereed, Peer-Reviewed Journal.
(1 JULY 2017-------30 JUNE 2018)
[1] Bindeshwar Singh, R.P. Payasi, Vipul Shukal, “A taxonomical review on impact assessment of optimally placed Dgs and FACTS controllers in power systems,” Energy Reports, Elsvier Journals, Vol. 3, July 2017, pp. 94-108. [SCOPUS]. (ISSN No: 2352-4847). Refereed, Peer-Reviewed Journal.
[2] Deependra Kumar Mishra, Bindeshwar Singh, “Enhancement of Power System Performance by Optimal Placement of Distributed Generation using Genetic Algorithms,” International Research Journal of Engineering and Technology (IRJET), Vol. 4, Issue 09, September 2017, pp. 370-384. [DOAJ]. (e-ISSN No: 2395-0056; p-2395-0072). Refereed, Peer-Reviewed Journal.
[3] Arvind Pratap, Bindeshwar Singh, Varun Kumar, “A Comprehensive Survey on Optimal Power Flow and Voltage Profile Enhancement,” International Research Journal of Engineering and Technology (IRJET), Vol. 4, Isssue 12, December 2017, pp. 630-645. [DOAJ]. (e-ISSN No: 2395-0056; p-2395-0072).
[4] Bindeshwar Singh, Arvind Pratap, “A Hybrid Approach Based on GA and Monte Carlo Simulation for Improvement of the System Power Factor by DG and STATCOM in Distribution Systms,” Journal of Electrical Engineering and Electric Technology, SCI-TECHNOL, Vol. 7, No. 1, Jan. 2018, pp. 35-56. [SCOPUS]. (ISSN No: 2325-9833). Refereed, PeerReviewed Journal.
[5] Bindeshwar Singh, Deependra Kumar Mishra, “A Survey on enhancement of power system performances by optimally placed DG in distribution networks,” Energy Reports, Elsvier Journals, Vol. 4, Jan. 2018, pp. 0-29. [SCOPUS]. (ISSN No: 2352-4847). Refereed, Peer-Reviewed Journal.
[6] Bindeshwar Singh, and Manish Kumar Yadav “GA for enhancement of system performance by DG incorporated with DSTATCOM in distribution power networks,” Journal of Electrical Systems and Information Technology, Elsvier Journal, Vol. 4, Issue 4, Feb. 2018, pp. 4–18 [THOMSON REUTERS-SCOPUS-SJR]. (ISSN No: 2352-4847). Refereed, PeerReviewed Journal.
(1 JULY 2018-------30 JUNE 2019)
[7] Bindeshwar Singh, Bindu Jee Gyanish, “Impact assessment of DG in distribution systems from minimization of total real power loss viewpoint by optimal power flow algorithms,” Energy Reports, Elsvier Journals, Vol. 4, July 2018, pp. 407-417. [SCOPUS]. (ISSN No: 2352-4847). Refereed, Peer-Reviewed Journal.
[8] Bindeshwar Singh, Garima Agrawal, “Enhancement of voltage profile by incorporation of SVC in power system network by using optimal power flow method in MATLAB/Simulink environments,” Energy Reports, Elsvier Journals, Vol. 4, July 2018, pp. 418-434. [SCOPUS]. (ISSN No: 2352-4847). Refereed, Peer-Reviewed Journal.
[9] Bindeshwar Singh, Swati Singh, “GA-Based Optimization for Integration of DGs, STATCOM and PHEVs in Distribution Systems,” Energy Reports, Elsvier Journals, Vol. 4, Sept. 2018, pp. 407-417. [SCOPUS]. (ISSN No: 2352-4847). Referred, Peer-Reviewed Journal.
[10] Bindeshwar Singh, Charit Pal, “GA-based optimization for improvement of the system power factor by integration of DGs and STATCOM in distribution networks,” Energy Reports, Elsvier Journals, Vol. 4, Sept. 2018, pp. 407-417. [SCOPUS]. (ISSN No: 2352-4847). Referred, Peer-Reviewed Journal.
[11] Bindeshwar Singh, Swati Singh, “Impact assessment of optimally placed and properly coordinated control of dgs and custom power devices in distribution systems: a taxonomical survey”. Universal Review Journals, Vol. 7, No. X, OCTOBER/2018, pp. 586-621, UGC Approved Journal-40792, [SCOPUS]. (ISSN NO : 2277-2723). Referred, PeerReviewed Journal. Impact Factor 5.7.
[12] Bindeshwar Singh, Sushil Kumar, “A Taxonomical Survey on Optimal Sizing, Placement and Properly Coordinated Control of FACTS Controllers in Power Systems: Global Climate Change Mitigation Efforts”. Universal Review Journals, Vol. 7, No. XII, December/2018, pp. 586-621, UGC Approved Journal-40792, [SCOPUS]. (ISSN NO : 2277-2723). Referred, Peer-Reviewed Journal. Impact Factor 5.7.
[13] Bindeshwar Singh, Piyush Pandey, Shubham Singh Yadav, Shaurya Pandey, Shwetank Gupta, Nikhil Srivastava, Hemant Kumar Verma, Sampan Rajput, Simran Giri, “A Survey on Applications of Different Artificial Intelligence Computational Techniques for Solving of Engineering Problems”. International Journal of Management, Technology And Engineering (IJMTE) , Volume 8, Isssue XII, (ISSN 2249-7455), UGC approved serial number-45550, Impact Factor 6.3.
[14] Bindeshwar Singh, Vimlesh, “Optimal placement and sizing of DG in distribution network from minimum total real power loss of the system viewpoint”. Universal Review Journals, Vol. 7, No. XIII, December/2018, pp. 586-621, UGC Approved Journal-40792, [SCOPUS]. (ISSN NO : 2277-2723). Referred, Peer-Reviewed Journal. Impact Factor 6.3.
BOOK CHAPTERS:
(1 JULY 2016-------30 JUNE 2017)
[1] Bindeshwar Singh, R.P. Payasi, and Jaymayjay Sharma, “Effects of DG operating power factor on its location and size by using GA in distribution systems,” HANDBOOK OF DISTRIBUTED GENERATIONS, SPRINGER PUB., Electric Power Technologies, Economics and Environmental Impacts, Chapter 15, April 2017, pp. 459-501. [THOMSON REUTERSSCI]. (ISSN No: 2314-7172). Refereed, Peer-Reviewed Book.

Huan-Liang Tsai, PhD

ProfessorDepartment of Electrical EngineeringDa-Yeh UniversityTaiwan
Automatic Control Systems
Systems Engineering and Project management
Communication Systems
(1) Huan-Liang Tsai and Chia-Chung Hsu, “Development of cost-effective photovoltaic supervision system using Arduino and MATLAB/Simulink platform,” SYLWAN Journal, Vol. 162, No. 8, August 2018, Paper ID: cUf8U, pp. 55-81. (SCI, impact factor: 0.623).
(2) Huan-Liang Tsai, Ronggeng Huang, and Yu-Hui Lian, “Development and Verification of Photo-Electro- Thermal Model for Commercial Photovoltaic Modules,” Wulfenia Journal, Vol. 25, No. 1, January 2018, pp. 68-97. (SCI, impact factor: 1.219).
(3) Phuong Truong Le, Huan-Liang Tsai, and Thanh Hien Lam, “A wireless visualization monitoring, an evaluation system for commercial photovoltaic modules solely in MATLAB/Simulink environment,” Solar Energy, Vol. 144, December 2016, pp. 1-11. (SCI: 21/89 in Energy & Fuels; IF: 3.469).
(4) Huan-Liang Tsai and Phuong Truong Le, “Self-sufficient energy recycling of light emitter diode/thermoelectric generator module for its active-cooling application,” Energy Conversion and Management, Vol. 118, June 2016, pp. 170-178. (SCI: 14/83 in Energy & Fuels; IF: 4.380).
(5) Huan-Liang Tsai, “Modeling and validation of refrigerant-based PVT-assisted heat pump water heating system,” Solar Energy, Vol. 122, December 2015, pp. 36-47. (SCI: 21/89 in Energy & Fuels; IF: 3.469).
(6) Huan-Liang Tsai, “Modeling and validation of refrigerant-based PVT-assisted heat pump water heating system,” Solar Energy, Vol. 122, December 2015, pp. 36-47. (SCI: 21/89 in Energy & Fuels; IF: 3.469).
(7) Huan-Liang Tsai, “Complete PV model considering its thermal dynamics, ” Journal of the Chinese Institute of Engineers, Vol. 36, No. 8, 2013, pp. 1073-1082, (SCI; 81/85 in Engineering, Multidisciplinary; IF: 0.241)

Doaa Mohamed Atia, PhD

Associate ProfessorPhotovoltaic Cells DepartmentElectronics Research Institute

Giza, Egypt

1. Amany M. ElNahrawy, Doaa M. Atia, Hanaa T. El-madany, and Ali B. Abou Hammad, " Synthesis, Characterization and Optical Properties of Cu3+ Co-doped ZAO Thin Films by Sol–Gel Method for Perovskite Solar Cell Applications", under publishing in ", International Journal of Advancement in Engineering, Technology and Computer Sciences (IJAETCS), 2018.
2. Doaa M. Atia, Hanaa T. El- Madany, Aref. Eliwa, Ahmed Samier, Mohamed Zahran, Khaled Metwaly, AbdelMoemen Mahgoub,“Spectral Irradiance Estimation of LED Solar Simulator Based on Genetic Algorithm”, Research Journal of Applied Sciences, Engineering and Technology, 15(6): 227-235, 2018.
3. Amany M. ElNahrawy, Doaa M. Atia, Hanaa T. El-madany, and Ninet M. Ahmed, "Effect of Sol-Gel (E102) Dye Spin-Coating on the Optical of MgO: ZnO Nanoparticles for Solar Cell Applications", International Journal of Advancement in Engineering, Technology and Computer Sciences (IJAETCS), Vol. 4, No. 2, PP. , 2017.
4. Doaa M. Atia, Hanaa M. Farghally, Ninet M. Ahmed, Hanaa T. El-Madany, " Organic Rankine Cycle Based Geothermal Energy for Power Generation in Egypt ", Energy and Power Engineering, Vol. 9, pp. 814-828, 2017.
5. Doaa M. Atia, Hanaa T. El-Madany," VHDL Based Maximum Power Point Tracking of Photovoltaic Using Fuzzy Logic Control ", International Journal of Electrical and Computer Engineering (IJECE), Vol. 7, pp. 3454- 3466, 2017.
6. Doaa M. Atia, Hanaa T. El-Madany," Analysis and design of greenhouse temperature control using adaptive neuro-fuzzy inference system", Journal of Electrical Systems and Information, , Vol. 4, pp. 34-48, 2017.
7. F. Fahmy, D. Atia, H. El Madany, and H. Farghally, "Greenhouse Heating Systems Based on Geothermal Energy ", International Journal Of Energy, Vol. 10, 2016.
8. H. M. Farghally, N. M. Ahmed, H. T. El-madany, D. M. Atia, and F. H. Fahmy, "Design and Sensitivity Analysis of Photovoltaic/ Thermal Solar Collector", International Energy Journal, Vol. 15, pp. 21-32, 2015.
9. Hanaa M. Farghally, Doaa M. Atia, Hanaa T. El-madany, and Faten H. Fahmy, "Fuzzy Logic Controller Based on Geothermal Recirculating Aquaculture System", Egyptian Journal of Aquatic Research, Vol. 40, pp. 103-109, 2014.
10. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, "Optimization and Feasibility Analysis of PV/Wind/ Battery Hybrid Energy Conversion", International Journal of Electrical, Robotics, Electronics and Communications Engineering, Vol. 8, 2014.
11. Hanaa M. Farghally, Doaa M. Atia, Hanaa T. El-madany, and Faten H. Fahmy, "Control Methodologies Based on Geothermal Recirculating Aquaculture System", Energy, Vol. 78, PP. 826-833, 2014.
12. H. M. Farghally, N. M. Ahmed, H. T. El-madany, D. M. Atia, and F. H. Fahmy, " Design and Sensitivity Analysis of Photovoltaic/Thermal Solar Collector", International Journal of Chemical and Environmental Engineering, Vol. 4, No. 5, PP. 335-34, Oct. 2013.
13. Doaa M. Atia and Hanaa T. El-madany, "Optimal Design Of Hybrid Renewable Energy Sources For Cardboard Factory", Water and Energy International Journal, Vol. 70, Issus 10, PP. 31-35, 2013.
14. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, “Design and Control Strategy of Diffused Air Aeration System", the Online Journal on Power and Electrical Engineering (OJPEE), Vol., 63, PP. 760-764, 2012.
15. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, “Mathematical Modeling and Neural Network Control for Dissolved Oxygen of Aquaculture Pond Aeration System”, The Online Journal on Electronics and Electrical Engineering (OJEEE) Vol., 4, PP. 517-523, 2012.
16. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, “Optimal Sizing and Modeling of Solar Water Heating System Based on Genetic Algorithm For Aquaculture System”, Mathematical and Computer Modelling journal, Vol., 55, PP., 1436-1449, 2012.
17. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, “A New Control and Design of PEM Fuel Cell System Powered Diffused Air Aeration System” Indonesian Journal of Electrical Engineering TELKOMNIKA, Vol., 10, No.2, 2012.
18. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, "Modeling and Control PV-Wind Hybrid System Based On Fuzzy Logic Control Technique", Indonesian Journal of Electrical Engineering TELKOMNIKA, Vol.10, No.3, 2012.
19. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, “Artificial Intelligence Techniques Based On Aquaculture Solar Thermal Water Heating System Water Quality Control” Renewable Energy And Power Quality journal (RE&POJ) ISSN 2172-038x, No. 9, Reference paper 536, Spain, May 2011.
20. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, “Design and Control of PEM Fuel Cell Diffused Aeration System Using Artificial Intelligence Techniques” ICESE 2011: International Conference On Environmental Science And Engineering. International Journal of Electrical, Robotics, Electronics and Communications Engineering, Vol. 5, Vol., 81, PP. 60-67, 2011.
21. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, “Solar Thermal Aquaculture System Controller Based on Artificial Neural Network”, Engineering journal, Vol., 3, PP. 815-822, 2011.
22. Doaa M. Atia, Faten H. Fahmy, Ninet M. Ahmed, Hassen T. Dorrah, “Artificial Intelligence Techniques Based on Aquaculture Solar Thermal Water Heating System Control”, The Online Journal on Electronics and Electrical Engineering (OJEEE), 2011.

Ming-Feng Yeh, PhD

ProfessorDepartment of Electrical EngineeringLunghaw University of Science and TechnologyTaoyuan, Taiwan
Ming-Feng Yeh received his B.S., M.S., and Ph. D. degrees in electrical engineering from Tatung University, Taipei, Taiwan in 1993, 1995, and 1999, respectively. Since 2001, he has been with the Department of Electrical Engineering, Lunghaw University of Science and Technology, Taoyuan, Taiwan, where he is currently a Professor. His current interests include grey system theory, neural networks, evolutionary algorithm, soft computing, and applications on bioengineering, pattern recognition, automatic control, and intelligent control.
Grey system theory, neural networks, evolutionary algorithm, soft computing, automatic control, and intelligent control.

Yomna Ali Moustafa Marzok Elkhateeb, PhD

ResearcherMicrobial Chemistry DepartmentGenetic Engineering and Biotechnology Division, National Research CentreEgypt
Dr. Yomna Ali Moustafa Marzok Elkhateeb studied Science and she has completed her P.hD in Biochemistry and Nutrition from Ain Shams University, Cairo, Egypt. she is working as a researcher in Microbial Chemistry Department, Genetic Engineering and Biotechnology Division, National Research Centre, Egypt. She was working as Assistant professor in Biology Department, College of Science, Northern Boarder University, Kingdom of Saudia Arabia. Currently, She is working as Assistant professor in Clinical Nutrition Department, College of Applied Medical Sciences, University of Hail, Kingdom of Saudia Arabia.
Microbiology; Nutrition; Biochemistry; Microbial Biochemistry; Nutritional Biochemistry; Probiotics; Enzymes.
Hanaa A. E., Hanem A. S., Nagwa I. Y., and Yomna A. M (2000). Isolation, screening and characterization of bacteriocin-producing lactic acid bacteria
isolated from traditional fermented food. Microbiol. Res. 154: 321-331.
Hanem A. S., Nagwa I. Y., Hanaa A. E. and Yomna A. M (2001). Purification of a peptide antibiotic produced by Lactococcus lactis. Annals of Agric. Sc., Moshtohor Vol. 39 (1): 407-420.
Fatma A. Kh., Nagwa I. Y., Hanaa A. E., Hanem A. S. and Yomna A. M (2006). Application on the potential effect of Lactobacillus plantarum on health. Al-Azhar Medical Journal. Vol. (39) No. (4): 601-614.
Hanaa A. El-Shafie, Nagwa Ibrahim, Hanem Abd El-Sabour and Yomna A. Mostafa (2008). Purification and Characterization of Bacteriocin Produced by Isolated Strain of Lactococcus lactis. Journal of Applied Sciences Research, 4(11): 1315-1321.
Shadia M. Abdel-Azez, Yomna A. Mostafa and Foukia E. Moafi. (2008). Partial purification and some properties of the chitosanases produced by Bacillus alvei Nec-14. Ournal of Applied sciences Research, 4(10): 1285-1290.
Hanaa A. El-Shafie, Nagwa Yahia, Hanem A. Ali, Fatma A. Khalil, Ebtsam M. El-Kady and Yomna A. Moustafa (2009). Hypocholesterolemic Action of Lactobacillus plantarum NRRL-B-4524 and Lactobacillus paracasei in Mice with Hypercholesterolemia Induced by Diet. Australian Journal of Basic and Applied Sciences, 3(1): 218-228.
Hoda A. Hamed, Yomna A. Moustafa and Shadia M. Abdel-Aziz (2011). In vivo Efficacy of Lactic Acid Bacteria in Biological Control against Fusarium oxysporum for Protection of Tomato Plant. Life Science Journal, 8(4): 462-468.
Foukia E. Mouafi, Shadia M. Abdel-Aziz, Yomna A. Moustafa and Abeer A. Keera (2012). Extracellular Metabolites Produced by a Novel Strain, Bacillus alvei NRC-14:4. Antimicrobial Activity of Chitosan Oligosaccharides. J. Basic. Appl. Sci. Res., 2(11)11434-11442.
Shadia M. Abdel-Aziz, Yomna A. Moustafa, and Hoda A. Hamed )2014 (. Lactic Acid Bacteria in the Green Biocontrol against some Phytopathogenic Fungi: Treatment of Tomato Seeds. J. Basic. Appl. Sci. Res., 4(12)1-9.
Yomna Ali Moustafa Elkhateeb, and Mona Rahil Alshammary (2017). Effect of fast foods in relation to Free Radicals and Antioxidants. American Journal of Laboratory Medicine. 2(6)156-162.
Yomna Ali Moustafa Marzok Elkhateeb and Razan Mohammed AL Harbi (2018). Comparative Study on Health Knowledge About Biochemical Effect of Chocolate on Human Health Among Females and Males of Hail University. International Journal of Gastroenterology. Vol. 2, No. 1, 2018, pp.
Yomna Elkhateeb and Noorah Alshammari (2018). Evaluation of knowledge about HIV-infection and its relation to probiotics among female students of Hail University. Antimicrobial Resistance and Infection Control 2018, 7(Suppl 1): PP-5
Yomna Ali Moustafa Marzok Elkhateeb and Norah yousefkhaled Alfhied(2018).
A Study on the Prevalence of Diabetes Mellitus Among Students of Hail University.
International Journal of Biomedical Science and Engineering. 6(3): 59-64
Chapter: Medicinal importance of Mangrove plants
Shadia M. Abdel-Aziz, Foukia E. Mouafi, Yomna A. Moustaf and Nayera A.M.Abdelwahed.
Springer International Publishing Switzerland 2016
N.Garg et al.(eds.), Microbes in Food and Health, P(77-96)

Bojan Đurin, PhD

Assistant ProfessorUniversity of Zagreb, Faculty of Geotechnical EngineeringHallerova Aleja 7, 42000 Varaždin, Croatia
Bojan Đurin was born on 30 July 1981 in Varaždin, Croatia, where he finished primary and secondary school. In the academic year 2000/2001 he enrolled into the Faculty of Geotechnical Engineering in Varaždin, University of Zagreb, where he graduated on 26 November 2007 and received his professional title Master of Geoengineering, hydrotechnics direction. From 1 June 2008 he was employed as a junior researcher at the Department of Hydrotechnics on the Faculty of Geotechnical Engineering, University of Zagreb. From 1 October 2014 he is employed as a senior researcher on same institution.
In the academic year 2008/2009 he enrolled the Postgraduate Doctoral program at the Faculty of Civil Engineering, Architecture and Geodesy, University of Split, which he finished by defending a doctoral thesis on year 2014 and gaining the academic title of Doctor of Science (PhD). He became an Assistant Professor in February of 2016. In his career as an author and co-author, he published more than 60 scientific and professional papers in journals and conference proceedings in his country and (mostly) abroad.
Renewable energy, water supply, and drainage systems, hydrology, multicriteria methods, hydrotechnical facilities
Honors and awards
• Scientific project of the University of Zagreb, ‘’The systematic application of solar photovoltaic energy for achieving of the sustainable irrigation system’’ (2016).
• Scientific project of the University of Zagreb, ‘’The systematic application of solar photovoltaic energy for achieving of the sustainable irrigation system-2nd part’’ (2017).
Associate on the projects:
• Scientific projects of the Croatian Ministry of Science, Education and Sport, entitled ''Characterization of Municipal Solid Waste'' (2008-2010) and ''Harmonic Analysis on a Real Semisimple Lie Algebra'' (2010-2012);
• Scientific project of the University of Zagreb, ''The Development of the Croatian Approach to Examining the Vulnerability of Karst Aquifers of the Dinarides'' (2014);
• Scientific project of the Faculty of Geotechnical Engineering ''Mapping the Natural Vulnerability of Karst Aquifers in the Example of Catchment Novljanska Žrnovnica'' (2014).
1. Đurin, Bojan; Shpetim, Lajqi; Baić, Lucija; Drilon, Meha; Naser, Lajqi: Hydropower plants and solar photovoltaic systems: Optimization of mutual functioning. All Energy 2018. Glasgow, United Kingdom, 2018. (conference).
2. Đurin, Bojan; Ptiček Siročić, Anita; Sakač, Nikola: Modelling of meteorological parameters for the purpose of sizing of the solar photovoltaic irrigation systems. 64 (2018), 1; (journal).
3. Lajqi, Naser; Kyçyku, Azem; Lajqi, Shpetim; Đurin, Bojan: Diagnostic methods of rear drive axle of the passenger cars. International Journal of Mechanical Engineering and Technology. 9 (2018), 1; 297-307. (journal).
4. Lajqi, Naser; Kyçyku, Azem; Lajqi, Shpetim; Đurin, Bojan: Modeling and simulation of heat transfer in turbocharged diesel engines. International Journal of Mechanical Engineering and Technology. 9 (2018), 1; 308-319 (journal).
5. Đurin, Bojan; Muhar, Anamarija: Predviđene promjene klime u Hrvatskoj i utjecaj na vodne resurse. Hrvatska vodoprivreda. 25 (2017), 221; 14-18 (journal).
6. Đurin, Bojan; Shpetim, Lajqi; Baić, Lucija: Contribution to the sustainability of solar photovoltaic irrigation systems: agronomy case study. Climate Changing Agriculture. Chania, Greece, 2017. (conference).
7. Đurin, Bojan; Ptiček Siročić, Anita; Muhar, Anamarija: Analysis of wastewater quality indicators in relation to wastewater temperature and precipitation by means of the RAPS method. Hrvatske vode: časopis za vodno gospodarstvo. 25 (2017), 102; 247-252 (journal).
8. Lajqi, Shpetim; Elezaj, Shaqir; Đurin, Bojan; Lajqi, Naser: Reconstruction of the Micro Pelton Hydro Turbine and Regulation of Working Conditions by Electronic Load Controller. The 7th International Conference & Workshop REMOO–2017 - Energy for Tomorrow – Proceeding. Venice, Italy, 2017. (conference).
9. Đurin, Bojan; Ptiček Siročić, Anita; Sakač, Nikola: Modelling of meteorological parameters for the purpose of sizing of the solar photovoltaic irrigation systems. Agrosym 2017. Jahorina, Bosnia & Herzegovina, 2017. (conference).
10. Lajqi, Shpetim; Meha, Drilon; Berisha, Xhevat; Đurin, Bojan; Baić, Lucija: The infrastructure of Renewable Energy Sources for Sustainable Development in Kosovo. 12th SDEWES Conference Dubrovnik 2017. Dubrovnik, Croatia, 2017. (conference).
11. Baić, Lucija; Đurin, Bojan: The sensitivity analysis of input values in water supply system driven by solar photovoltaic energy. Environmental Engineering. 4 (2017), 1; 61-64 (journal).
12. Dobeš, Pavel; Busacchi, Vinicio; Danihelka, Pavel; Đurin, Bojan; Nevrlý, Václav; Zakota, Zoltán; Dlabka, Jakub: O resilientním myšlení. Population protection - Dangerous substances 2017 - Conference Proceedings. Ostrava, Czech Republic, 2017. (conference).
13. Baić, Lucija; Đurin, Bojan: Sizing of the Sustainable Irrigation System Driven by Solar Photovoltaic Energy and Wind by Using New Sizing Algorithm. My first conference. Rijeka, Croatia, 2017. (conference).
14. Đurin, Bojan: Characteristics of the concept of improving the operation work of the water supply system based on the use of solar photovoltaic energy. Environmental Engineering. 4 (2017), 1; 41-49 (journal).
15. Đurin, Bojan; Baić, Lucija: Poplave-prirodna ili antropogena pojava? Hrvatska vodoprivreda, 25 (2017), 219; 29-32 (journal).
16. Đurin, Bojan; Baić, Lucija; Kuzik, Mirna: Assesment of multicriteria method Promethee for innovative sizing model of irrigation system driven by solar photovoltaic energy. IJMS - The International Journal of Multi-disciplinary Sciences, 1-17 (2017), 5; 55-69 (journal).
17. Lajqi, Shpetim; Đurin, Bojan; Baić, Lucija; Doci, Ilir; Lajqi, Naser; Drilon, Meha: Critical Period Method - Innovative Method for Sizing of the Irrigation Systems: Case Kosovo. Mechanization in Agriculture & Conserving of the Resources, 63 (2017), 4; 157-160 (journal).
18. Lajqi, Shpetim; Đurin, Bojan; Baić, Lucija; Doci, Ilir; Lajqi, Naser; Drilon, Meha: Critical Period Method - Innovative Method for Sizing of the Irrigation Systems: Case Kosovo. Proceedings - Volume 1: Agricultural machines. Research and testing. New machine designs. Energy-saving technologies. Varna, Bulgaria, 2017. (conference).
19. EL-Shimy, Mohamed; Đurin, Bojan: Generalized Method for Sizing Optimization of Standalone 100% Renewable Energy Mixed Source for Supplying Deferrable Loads; in: Economics of Variable Renewable Sources for Electric Power Production. 2017. 395-421 (book).
20. Đurin, Bojan; Baić, Lucija; Kuzik, Mirna; Loborec, Jelena: Application of multicriteria methods in usage of solar photovoltaic energy for irrigation. Proceedings of the 2nd International Student Environmental Conference FISEC16, 2016, Belgrade, Serbia. 2017. (conference).
21. Margeta, Jure; Đurin, Bojan: Innovative approach for achieving sustainable urban water supply system by using solar photovoltaic energy. Ingeniería e Investigación. 37 (2017), 1; 58-67 (journal).
22. Đurin, Bojan; Baić, Lucija; Kovač, Sanja: New Aspects of the Connection between the Pumping and Consumption Regime of Drinking Water in Human Settlements. Water for All, Osijek, Croatia, 2017. (conference).
23. Đurin, Bojan; Nađ, Lucija: New approach for the Selection of Technologically Most Appropriate Variant of the Water Supply System. World Congress on Sustainable Technologies (WCST-2016), London, United Kingdom, 2017. (conference).
24. Ptiček Siročić, Anita; Đurin, Bojan; Glumac, Nada; Nađ, Lucija: Variance Analysis of Quality Indicators Values of Wastewater by RAPS Method. Water for All, Osijek, Croatia, 2017. (conference).
25. Margeta, Jure; Đurin, Bojan: Multi-Criteria Approach in Solar Urban Water Supply Systems. Proceedings of the Institution of Civil Engineers-Water Management. (2016) (journal).
26. Borisov, Boyan; Đurin, Bojan; Matin, Josip: The Concept of Sustainable Irrigation on the Example of Football Field of F.C. ''Obreš'', Sveti Ilija, Croatia. Inženjerstvo okoliša. 3 (2016), 1; 71-81 (journal).
27. Đurin, Bojan; Baić, Lucija: The Method of Selecting the Optimal Variant of Irrigation Systems Driven by PV Energy. American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS). 26 (2016), 3; 225-243 (journal).
28. Đurin, Bojan; Baić, Lucija: Sustainability Analysis of Urban Water Supply Systems Powered by Solar Energy and Dependencies of the Sizes of its Individual Parts. Hrvatske vode: časopis za vodno gospodarstvo. 98 (2016); 285-294 (journal).
29. Loborec, Jelena; Đurin, Bojan: Application of Multi-Criteria Analysis for the Purpose of Selecting the Optimal Method for Assessing Intrinsic Vulnerability of Karst Aquifers. Hrvatske vode: časopis za vodno gospodarstvo. 24 (2016), 97; 193-202 (journal).
30. Đurin, Bojan; Baić, Lucija: Functional Dependencies of the Size of Certain Parts of the Energetically and Hydraulically Sustainable Urban Water Supply System Driven by Solar Photovoltaic Energy. Energy and the Environment 2016, Opatija, Croatia, 2016. (conference).
31. Đurin, Bojan; Jug, Jasmin; Strelec, Stjepan: Application of Multi-Criteria Methods in Geophysical Investigations. GEO-EXPO 2016, Banja Luka, Bosnia and Herzegovina, 2016. (conference).
32. EL-Shimy, Mohamed; Đurin, Bojan: Techno-Economic Evaluation and Sizing Optimization of Solar-PV and Wind Energy Sources for Irrigation Water Pumping. Energy and the Environment 2016, Opatija, Croatia, 2016. (conference).
33. Đurin, Bojan; Kovačev-Marinčić, Barica: Selection of Optimal Groundwater Pumping Sites Using Multi-Criteria Method Promethee. 16th International Multidisciplinary Scientific GeoConference SGEM 2016, Wien, Austria, 2016. (conference).
34. Đurin, Bojan: Some Aspects of the Operation Work of Pump Station and Water Reservoir. Periodica Polytechnica Civil Engineering. 60 (2016); (journal).
35. Đurin, Bojan; Lucija, Baić; Kuzik, Mirna; Matin, Josip: Hydraulic, Energetic and Hydrological Characteristics of Sustainable Irrigation Systems: an Example of Football Club ''Obreš'', Sveti Ilija, Croatia. Water for All, Osijek, Croatia, 2016. (conference).
36. Đurin, Bojan: Sizing of the Sustainable Irrigation System by Using of the Critical Period Method: Case Study of the Football Club ‘’Obreš’’, Sveti Ilija, Croatia. International Journal of Sustainable Energy Development (IJSED). 4 (2015), 1; 206-214 (journal).
37. Đurin, Bojan; Margeta, Jure; Bojanić, Davor: The Impact of the Water Consumption Regime on the Work of Reservoirs. E-WAter. 1 (2015); 1-21 (journal).
38. Patrčević, Vladimir; Đurin, Bojan; Kuharić, Ivan: Analyses of Intensity Precipitation for the Dimensioning of Drainage Facility of Rainfall on the Area Town Daruvar. Inženjerstvo okoliša. 2 (2015), 2; 103-110 (journal).
39. Đurin, Bojan; Margeta, Jure; Jambrović, Luka: Analysis of the Impact of Pumping Station Operating Regime on Required Water Reservoir Volume. Inženjerstvo okoliša. 2 (2015), 1; 29-36 (journal).
40. Đurin, Bojan: Sustainable Water and Energy Use for Irrigation Demands. World Congress on Sustainable Technologies (WCST-2015), London, United Kingdom, 2015. (conference).
41. Margeta, Jure; Đurin, Bojan: Possibilities of Use of Renewable Energy Sources for Water Pumping in Urban Water System). 6th Croatian water conference with international participation ''Croatian Waters on the Investment Wave, Opatija, Croatia, 2015. (conference).
42. Đurin, Bojan; Margeta, Jure: Analysis of the Possible Use of Solar Photovoltaic Energy in Urban Water Supply Systems. Water. 6 (2014), 6; 1546-1561 (journal).
43. Margeta, Jure; Đurin, Bojan: Hydrological and Hydro-Energy Indicators of the Hybrid Energy System Using Solar and Pump Storage Hydroelectric Plant. International Journal of Sustainable Energy. 33 (2014), 4; 827-841 (journal).
44. Patrčević, Vladimir; Kopjar, Ana; Đurin, Bojan: Analysis of Rainfall Infiltration on the Alluvial Soil. Inženjerstvo okoliša. 1 (2014); 7-18 (journal).
45. Đurin, Bojan; Zlatarek, Darko: Classic and Integral Method of Stormwater Sewers Design and Construction. Mineral. 99 (2014), 5; 22-25 (journal).
46. Đurin, Bojan; Margeta, Jure: Water Reservoirs Operation in the Changed Water Consumption Regime. Current Issues in Water Supply and Sewage, Vodice, Croatia, 2013. (conference).
47. Đurin, Bojan: The Concept of Sustainability of Urban Water Supply System Using Solar Photovoltaic Energy. The First Simposium of Young Researchers in the Field of Civil Engineering, Architecture, Surveying and Electrical Engineering ''Zajednički temelji'', Split, Croatia, 2013. (conference).
48. Đurin, Bojan; Margeta, Jure: Concept of Green Energy Supply for Urban Water System. International Conference on Green Technology & Ecosystem for Global Sustainable Development 2012., Tuzla, Bosnia and Herzegovina, 2012. (conference).
49. Đurin, Bojan; Margeta, Jure; Glasnović, Zvonimir: PV Power for Urban Water Supply. International Journal of Energy Science. 1 (2011), 3; 131-139 (journal).
50. Margeta, Jure; Đurin, Bojan; Glasnović, Zvonimir: Urban Water Supply Generated by PV Energy. ISES Solar World Congress 2011., Kassel, Germany. Kassel, Germany, 2011. (conference).
51. Zelenika, Mladen; Soldo, Božo; Đurin, Bojan: Changes in Water Quality of Zagreb Water-Pumping Sites. Archives of environmental protection. 35 (2009), 4; 145-158 (journal).
52. Đurin, Bojan: Technical Solutions and Defects in Performance of Precipitation Drainage Systems. Modern Methods of Storm Water Drainage in Urban Coastal Areas, Rijeka, Croatia, 2009. (conference).
53. Đurin, Bojan; Tušar, Božena; Zorčec, Vedrana: Collection Pit and/or Sewage Disposal Tank. Current Issues in Water Supply and Sewage, Šibenik, Croatia, 2008. (conference).

Dr. Hasan Aydogan

Associate ProfessorMechanical Engineering DepartmentSelcuk University, Technology FacultyKonya, Turkey
Energy, artificial neural network, renewable energy
1. Hasan AYDOGAN, Performance, Emission And Combustion Characteristics Of Bioethanol-Biodiesel-Diesel Fuel Blends Used In A Common Rail Diesel Engine, Journal of Thermal Science and Technology, Isı Bilimi ve Tekniği Dergisi, 35, 2, 19-27, 2015.
2. Hasan AYDOGAN, Prediction of Diesel Engine Performance, Emissions and Cylinder Pressure Obtained Using Bioethanol - Biodiesel - Diesel Fuel Blends Through an Artificial Neural Network, Journal of Energy in Southern Africa, 2015, Vol 26, No 2, May 2015, 74-83.
3. A. Engin ÖZÇELİK, Hasan AYDOGAN, Mustafa ACAROGLU, Determining the Performance, Emission and Combustion Properties of Camelina Biodiesel Blends, Energy Conversion and Management 96 (2015) 47–57.
4. Mustafa ACAROĞLU, Hasan AYDOĞAN, Biofuels Energy Sources and Future of Biofuels Energy in Turkey, Biomass and Bioenergy, 2012, Volume 36, January, 69-76.
5. Hasan AYDOGAN, An Experimental Study Of The Effects Of Bioethanol-Unleaded Gasoline Blends On Engine Performance And Emissions, Energy Education Science and Technology Part A: Energy Science and Research, 2012 Volume (issues) 28(2): 623-630.
6. Hasan AYDOGAN, A. Engin OZCELIK, Mustafa ACAROGLU, The Effect Of Peanut Oil Methyl Ester On The Performance And Emissions Of A Diesel Engine With A Pump Injection Fuel System, Energy Education Science and Technology Part A: Energy Science and Research, 2011 Volume (issues) 28(1): 189-200.
7. Hasan AYDOGAN, Mustafa ACAROGLU, The Effects Of Bioethanol-Diesel Fuel Blends On The Performance And Emissions Of A Turbocharged Pump Injection Diesel Engine, Energy Education Science and Technology Part A: Energy Science and Research, 2011 Volume (issues) 28(1): 261-270.
8. Hasan AYDOGAN, Adem Alpaslan ALTUN, A. Engin OZCELIK, Performance Analysis Of A Turbocharged Diesel Engine Using Biodiesel With Back Propagation Artificial Neural Network, Energy Education Science and Technology Part A: Energy Science and Research, 2011 Volume (issues) 28(1): 459-468.
9. AYDOGAN, Hasan, HIRZ, Mario, BRUNNER, Helmut, The use and future of biofuels, International Journal of Social Sciences Vol. III (4), 2014, pp 12-21.
10. A. Engin ÖZÇELİK, Hasan AYDOĞAN, Mustafa ACAROĞLU, A Study of the effects of bioethanol – gasoline blends on vehicle emissions, Journal of Clean Energy Technologies, Vol. 3. No. 5, September 2015, (332-335)
11. Hasan AYDOGAN, Mustafa ACAROGLU, Determination of the effects of bioethanol-diesel fuel blends containing Beraid ED10 additive on engine performance and emissions in a diesel engine with a pump injection system, Academic Journals Scientific Research and Essays, Vol. 8(37), pp. 1741-1751, 4 October, 2013.
12. Hasan AYDOGAN, A.Engin OZCELIK, Mustafa ACAROGLU, Hakan IŞIK, A Study on Generating Electricity by Using Exhaust Waste Heat in a Diesel Engine, Applied Mechanics and Materials Vols. 446-447 (2014) pp 858-862
13. A. Engin ÖZÇELİK, Hasan AYDOGAN, Mustafa ACAROĞLU, Elektronik Kontrollü Bir Motorda Biyoetanol - Benzin Karışımlarının Motor Performansına Etkileri, Renewable Energy Sources Energy Policy and Energy Management, Vol. 1, 2013, (39-43).
14. Hasan AYDOGAN, A. Engin ÖZÇELİK, Mustafa ACAROĞLU, Biyoetanol - Benzin Karışımlarının Motor Emisyonlarına Etkisinin Deneysel Araştırılması, Renewable Energy Sources Energy Policy and Energy Management, Vol. 1, 2013, (51-55).
15. Mustafa ACAROGLU, Hasan AYDOGAN, A. Engin ÖZÇELİK, İçten Yanmalı Motorlarda Kullanılan Kontrol Sistemleri Ve Elektronik Kontrol Ünitelerindeki Gelişmeler, Makine İhtisas Dergisi, ISSN-1305-8037, Sayı 75, Ağustos 2010, (54-59).
16. Hasan AYDOGAN, Mustafa ACAROGLU, Günümüz İçten Yanmalı Motorlarında Kullanılan Kontrol Ve Veri İletim Sistemleri Ve Gelişmeler, Taşıt Teknolojileri Elektronik Dergisi (TATED), Cilt: 1, No: 2, 2009, (51-62).
17. Hasan AYDOĞAN, Recai KUŞ, Abdullah ÖZSOY, Malzeme Bilimi Öğretiminde Çoklu Ortam Uygulamaları, Selçuk Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Teknik-Online Dergisi, ISSN 1302/6178, Cilt 4, Sayı:1–2005, (20-30).
18. Hasan AYDOĞAN, A. Engin OZCELIK, Mustafa ACAROGLU, Investigation of Use in Diesel Engine of Camelina Biodiesel - Bioethanol - Eurodiesel Fuel Blends, 2015 International Business & Education Conferences, 2-6 August 2015, (117-124), New York City, USA.
19. Hasan AYDOGAN, Mario HIRZ, Helmut BRUNNER, The Use and Future of Biofuels, 12th International Academic Conference, September 1 – 4, 2014, 88-94, Prague, Czech Republic.
20. Hasan AYDOĞAN, Mustafa ACAROĞLU, A. Engin ÖZÇELİK, Effects Of Bioethanol-Diesel Fuel Blends Containing Beraid ED10 Additive On Engine Emissions, The 3rd International Conference on Engineering and Applied Science, 7-9 November 2013, (750-755), Osaka, Japan.
21. A. Engin ÖZÇELIK, Hasan AYDOĞAN, Mustafa ACAROĞLU, An Experimental Study on the Effects of Bioethanol-Unleaded Gasoline Blends on Engine Performance in a Spark Ignition Engine, ICESE 2013, International Conference on Environmental Sciences and Engineering, 26-27 September 2013, (1113-1115), Roma, Italy.
22. Hasan AYDOĞAN, Mustafa ACAROĞLU, Effects Of Bioethanol-Diesel Fuel Blends Containing Beraid ED10 Additive On Engine Performance, International Journal of Arts and Sciences European Conference for Academic Disciplines, 2-7 December 2012, (57-62), Gottenheim, Germany.
23. Hasan AYDOĞAN, Mustafa ACAROĞLU, Effects of Bioethanol–Diesel Fuel Blends on Performance of a Diesel Engine, 6th International Ege Energy Symposium & Exhibition, 28-30 June 2012, (20-26), Ege University, İzmir, Turkey.
24. A. Engin Özçelik, Hasan AYDOĞAN, Mustafa Acaroğlu, Effects of E50 and E100 Bioethanol – Gasoline Blends on Vehicle Emissions, 6th International Ege Energy Symposium & Exhibition, 28-30 June 2012, (27-34), Ege University, İzmir, Turkey.
25. A. Engin Özçelik, Hasan AYDOĞAN, Mustafa Acaroğlu, Pompa Enjektörlü Diesel Motorda Fistik Yaği Metil Esterinin Egzoz Emisyonlarina Etkileri, 12. Uluslararasi Yanma Sempozyumu, 24-26 Mayıs 2012, (153-157), Kocaeli Üniversitesi, Türkiye.
26. Hasan AYDOĞAN, A. Engin Özçelik, Mustafa Acaroğlu, Turboşarjli Bir Diesel Motorda Fistik Yaği Metil Esterinin Kullanilmasinin Motor Performansina Etkileri, 12. Uluslararasi Yanma Sempozyumu, 24-26 Mayıs 2012, (149-152), Kocaeli Üniversitesi, Türkiye.
27. Hasan AYDOĞAN, Mustafa ACAROĞLU, Effects Of Bioethanol–Diesel Fuel Blends On Emissions Of A Diesel Engine, 2011 International Conference on Energy and Electrical Systems (ICEES 2011), 12-13 August 2011, (593-597), Kuala Lumpur, Malaysia.
28. A. Engin ÖZÇELİK, Hasan AYDOĞAN, Mahmut ÜNALDI, Investigation Of The Effects Of Diesel Fuel, Rapeseed Oil And Cotton Oil Methyl Esters On The Performance Of A Turbocharged Diesel Engine, International Congress on Automotive and Transport Engineering (CONAT 2010), XI-th Edition, 27–29 October 2010, (131-138), Transilvania University, Brasov, Romania.
29. Hasan AYDOĞAN, Mustafa ACAROĞLU, A. Engin ÖZÇELİK, Effects Of E2, E20, E30 Bioethanol-Gasoline Blends On Vehicle Emissions And Performance, International Congress on Automotive and Transport Engineering (CONAT 2010), XI-th Edition, 27–29 October 2010, (25-32), Transilvania University, Brasov, Romania.
30. A. Engin ÖZÇELİK, Hasan AYDOĞAN, Mustafa ACAROĞLU, Investigation Of Diesel Fuel, Rapeseed – 00 Oil And Cotton Oil Methyl Esters Effects On A Turbocharged Diesel Engine Emissions, 5th International Ege Energy Symposium and Exhibition (IEESE-5), 27-30 June 2010, (108), Pamukkale University, Denizli, Turkey.
31. Hasan AYDOĞAN, Mustafa ACAROĞLU, Effects of E15 and E85 Bioethanol – Gasoline Blends on Vehicle Performance and Emissions, International Conference On Fuels And Combustion In Engines, 8-9 October 2009, (154-162), Istanbul Technical University, İstanbul / Türkiye.
32. Hasan AYDOĞAN, A. Engin ÖZÇELİK, The Effect Of The Use Of Canola Methyl Ester Produced By Using Different Catalysts And Washing Waters In Diesel Engines On Emissions, International Conference On Fuels And Combustion In Engines, 8-9 October 2009, (91-96), Istanbul Technical University, İstanbul / Türkiye.
33. Hasan AYDOĞAN, Mustafa ACAROĞLU, Research Of The Effects Of Bioethanol-Gasoline Blends On Vehicle Emissions, International Conference of CIGR Section IV “Rational Use of Energy in Agriculture and the Economical Use of the Renewable Sources in connection with Environmental Protection”, and “Synergy and Technical development in the Agricultural Engineering”, 30 August - 3 September 2009, Szent István University, Faculty of Mechanical Engineering, Budapest, Hungary.
34. İlhan ASİLTÜRK, Hasan AYDOĞAN, Otomotiv Mekatroniğinde Sensör Uygulamaları, 4th International Advanced Technologies Symposium, September 28–30, 2005, (972-982), Selcuk University, Konya / Türkiye.
35. Hasan AYDOĞAN, İlhan ASILTÜRK, Benzin Motorlarında Kullanılan Kontrol Sistemleri, 4th International Advanced Technologies Symposium, September 28–30, 2005, (960-965), Selcuk University, Konya / Türkiye.
36. Hasan AYDOĞAN, A.Alpaslan ALTUN, Değişken Supap Zamanlamasının Yapay Sinir Ağları İle Kontrol Edilmesi, 4th International Advanced Technologies Symposium, September 28–30, 2005, (966-970), Selcuk University, Konya / Türkiye.
37. İlhan ASİLTÜRK, Hasan AYDOĞAN, Otomotiv Teknolojilerinde Sanal Eğitimin Kullanılması, 1. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi, Marmara Üniversitesi, 5–7 Eylül 2005, (968-972), İstanbul / Türkiye.
38. Recai Kuş, Hasan AYDOĞAN, Teknik Eğitim Fakültelerinde Otomotiv Eğitimi, 1. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi, Marmara Üniversitesi, 5–7 Eylül 2005, (1047-1050), İstanbul / Türkiye.
39. A. Engin ÖZÇELİK, Hasan AYDOGAN, Mustafa ACAROĞLU, Elektronik Kontrollü Bir Motorda Biyoetanol - Benzin Karışımlarının Motor Performansına Etkileri, 9. Temiz Enerji Sempozyumu, 25-28 Aralık 2013, (39-43), Konya / Türkiye.
40. Hasan AYDOGAN, A.Engin ÖZÇELİK, Mustafa ACAROĞLU, Biyoetanol - Benzin Karışımlarının Motor Emisyonlarına Etkisinin Deneysel Araştırılması, 9. Temiz Enerji Sempozyumu, 25-28 Aralık 2013, (51-55), Konya / Türkiye.

Dr. Xing-Gang Yan

Associate ProfessorControl Engineering DepartmentThe University of KentUK
Dr. Xing-Gang Yan currently is an Associate Professor in Control Engineering in the University of Kent, United Kingdom. He worked as a Research Fellow/Research Associate in the Northwestern Polytechnical University, China, the University of Hong Kong, China, Nanyang Technological University, Singapore and the University of Leicester, United Kingdom. He is the member of IEEE and IET and the Fellow of HEA. He is the Editor-in-Chief of the International Journal of Engineering Research and Science & Technology. He was a Lead Guest Editor of a special issue in the Mathematical Problems in Engineering. He serves as a member of the Editorial Board of several engineering journals and TCP member of several international conferences. He has published three books, ve book chapters and over 170 referred papers in the area of Control Engineering. He has successfully supervised three PhD students, and currently, he is the main supervisor of three PhD students. His research subject is Control Theory with Applications in the robot system, automated highway systems, high-speed railway, light control, and multimachine power systems etc.
Dr. Xing-Gang Yan's achievement has provided signi cant impact on control engineering research. His Google Scholar H-Index is 29 across his career and 22 across the last ve years with total citation 3004. His ResearchGate Score is 36.36 with 99:89% Publications and 0:12% Followers. (all data accessed in 19/10/2018)
RESEARCH GRANTS
1. Empowerment of disabled people through the user co-production of assistive technology (EDU-CAT), European Regional Development Fund (ERDF) Intereg V.. Sept. 2016 { Aug.2020. (CI)
2. Fault Detection and Fault-Tolerant Control for the Traction systems of High-Speed Trains with Closed-Loop Structure National Natural Science Foundation of China, China. Jan. 2016 { Dec. 2019 (CI)
3. Variable structure control for complex singular systems with applications in industrial systems, The Royal Academy of Engineering, UK, Oct. 2013 { Jan. 2014. (PI)
4. Smart Autonomous Vehicle for Urban Mobility using Renewable Energy (SAVEMORE), European Regional Development Fund (ERDF) - Interreg IVA programme, Sept. 2013 { June 2015. (CI)
5. Variable Structure Control for Complex Time Delay Systems Using Only Output Information, University of Kent, UK, May 2013 { Oct. 2013. (PI)
6. Higher Order Sliding Mode Based Decentralised Strategies For Complex Interconnected Systems, EPSRC, UK, Aug. 2012- Aug 2013. (PI)
7. Robust Holographic Control Theory and Design for Nonlinear Large Scale Systems with Similarity NPU Press funding, P.R. China.. Sept. 1997 { Dec. 1998. (PI)
8. Nonlinear iterative learning control and robust control with applications, China National Postdoctoral Science Foundation. P.R. China May 1997 { May 1999. (PI)

Dr. Khalaf Yasin Al-Zyoud

Albalqaa Applied UniversityMarka Ashamalya P. O.Box 15008 Amman 11134, Jordan
- 2001-2002: Head of Electrical Engineering Department at the Faculty of Engineering Technology / Al-Balqa’ Applied University.
- 2002-2004: assistant dean for student affairs at The Faculty of Engineering Technology / Al-Balqa’ Applied University.
- 2005-2009: Assistant professor at The Faculty of Engineering Technology / Al-Balqa’ Applied University.
- Supreme Advisory Board member of the National Programmed for outstanding initiatives

- Holds a Masters of Excellence Award and achievement at the national level
For the year 2006
- Supreme Advisory Board member of the national program for the development
and excellence
- 2010: Jordanian Parliament member
- 2010-2012: Reporter of Energy committee of Jordanian Parliament
- 2010-2012: A member of the education committee in the Jordanian parliament
- 2013-2018: Ass. Prof. at Al-Balgaa Applied Univ. Faculty of Engineering
Technology
- 2018: Head of Energy Committee at Talal Abu-Gazaleh Knowledge forum
- 2018: Editorial Board member for “Electrical and Electronics Technology
Open access Journal.”USA
High Voltage Engineering, Power Control System, Power Analysis
HONORS
- 1993-1997. Scholarship from Ministry of High Education (Ph. D. programs), for High Voltage Engineering and Transformers, ((The program was completed in English Language)).
- 1992. Scholarship from Ministry of High Education (Special Course In “Automation – PLC”, Italy).
1. Khalaf Al-zyoud: Mitigation processes in insulating foils after partial
discharge, European-American journals, UK, 2018
2. Khalaf Al-zyoud: A new method of insulation wire for power transformers,
International journal of applied power engineering(IJAPE),
vol.6, No.1, April 2017
3. Khalaf Al-zyoud: An example of solar tracking system& hybrid power
generation in Jordan, International journal of engineering
and technical re Khalaf Al-zyoud: search (IJETR),
vol.4,Issue 4, April 2016
4. Khalaf Al-zyoud: Voltage Transient Computation for Transformer Windings
with Arresters, IJREAT International Journal of Research in
Engineering & Advanced Technology, Volume 3, Issue 5,
Oct -Nov, 2015
5. Khalaf Al-zyoud: Composite insulation in Parallel under DC and AC
Voltages,Internationa journal of engineering trends and
technology(IJETT), vol. 28, No.8, October 2015
6. Khalaf Al-zyoud: Estimation of Electrical Field Distribution in Many
Dimensions Via Non uniform Dielectric, Journal of
Engineering (IOSRJEN ), Vol.5, issue 02, 2015
7. khalaf Al-Zyoud and others : Electric and Magnetic Fields in the Jordanian
Region (Calculation and Measurement), European Journal
of Scientific Research, ISSN 1450-216X,vol.64 No.3 (2011)
8. khalaf Al-Zyoud, Almoflehh Anwar: A new Technique for Location of fault
Location on Transmission Lines, Modern Applied Science
journal, vol.4,No.8, August 2010, Canada (CCSE)
9. Khalaf Al-zyoud: Temperature control of power transformers during their operation, the second international on engineering& ICT, February 18-21-2010, Malaysia, Technical University Malaka
3
10. Khalaf Al-zyoud: A utility Power Transformer Failure Analysis, JES, No.4,
Vol.33, 2005
11. Khalaf Al-zyoud: A numerical program for interpretation of the results of chromatographic measurements of gases dissolved in power transformer oil, (JIEEE, C, Jordan), 1998.
12. Khalaf Al-zyoud: The analysis and diagnosis of transformer insulation, on the basis of chromatographic measurements, (Ph. D. dissertation, Technical University of Lodz, Poland), 1997.
13. Khalaf Al-zyoud: An expert system for diagnosis of power transformer of the basis of gas dissolved in transformer oil, (International C. of El. Power, Romania), 1996.
14. Khalaf Al-zyoud: Diagnosis methods of power transformer failures, (International Conference of transformers, Poland), 1996.

Dariusz Horla, PhD, DSc

Poznan University of Technology Faculty of Electrical Engineering Institute of Control, Robotics and Information Engineering 60-965 Poznan, Poland
Dariusz Horla is a researcher and an adjunct professor at the Institute of Control, Robotics, and Information Engineering, in Poznan University of Technology (Faculty of Electrical Engineering), working there since 2002. He received his M.Sc., Ph.D., and D.Sc. in Control and Robotics from Poznan University of Technology (PUT) in 2002, 2005 and 2013, respectively. In the last 3 years using Erasmus+ framework he visited Multi-robot Lab (Czech Technical University in Prague, thrice), Vision4UAV (Technical University of Madrid), and Advanced Algorithm for Control and Communications (CTU Prague). He is a leader of the Applications of Control Techniques (ACT) research group at PUT, and a member of the AeroLab group therein.
His main research interests include multivariable control systems, nonlinear systems, anti-windup compensation, directional change in controls, adaptive and robust control, optimal control, linear matrix inequalities techniques, fractional-order systems and optimization theory, including UAV applications. He published more than 40 papers in international journals, over 60 conference papers, and published over 10 monograph chapters. Since 2015 he is the Editor in Chief of an open access journal Studia z Automatyki I Informatyki (Studies in Automation and Information Technology). He served multiple times as a reviewer to international journals recognized in the field, such as Asian Journal of Control, IEEE Transactions on Control Systems Technology, IEEE Transactions on Industrial Electronics, ISA Transactions, IET Control Theory and Applications, Journal of Applied Mathematics and Computer Science, Machines, Sensors, Neurocomputing, International Journal of Systems Science, Bulletin of the Polish Academy of Sciences, IEEE Robotics and Automation Letters, and other.
Focused on applications of control techniques. Vast research experience in optimal control, adaptive control, optimization methods, including UAV applications, linear matrix equalities, robust control, multivariable control systems, nonlinear systems, anti-windup compensation, directional change in controls.
Owczarkowski A., Horla D., Zietkiewicz J., Introduction of feedback linearization to robust LQR and LQI control – analysis of results from an unmanned bicycle robot with reaction wheel, Asian Journal of Control, 2019, Vol. 21(3), pp. 1-13, IF 1.528
Giernacki W., Horla D., Báča T., Saska M., Real-time model-free minimum-seeking autotuning method for unmanned aerial vehicle controllers based on Fibonacci-search algorithm, Sensors, 2019, Vol. 19, 312, IF 2.475
Giernacki W., Horla D., Sadalla T., Fraire T.E., Optimal tuning of non-integer order controllers for rotational speed control of UAV’s propulsion unit based on an iterative batch method, Journal of Control Engineering and Applied Informatics, 2018, Vol. 20(4), pp. 22-31, IF 0.698
Sadalla T., Horla D., Giernacki W., Stability region of a simplified multirotor motor–rotor model with time delay and fractional-order PD controller, Automatika, 2017, Vol. 58(4), pp. 384-390, IF 0.217
Owczarkowski A., Horla D., Robust LQR and LQI control with actuator failure of a 2DOF unmanned bicycle robot stabilized by an inertial wheel, International Journal of Applied Mathematics and Computer Science, 2016, Vol. 26(2), pp. 325-334, IF 1.420

Smain Femmam, MS, PhD

Director of ResearchUniversity of Haute-AlsaceFrance
Dr. Smain Femmam is Director of research at the University of Haute-Alsace France and responsible for the Research team on Signals & Safety Systems of Polytechnic Engineers School Sceaux France. He received the MS and Ph.D. degrees in Signal Processing and Computers from Versailles University, France in 1997 and 1999 respectively. Since 2013 he
is promoted to a rank of senior director of research (HDR). After that, he joined the CMU Carnegie Mellon University & West Virginia University as Postdoc Fellow and Distinguished Visiting Professor. His main research area is signal processing, safety systems, communication, and embedded systems. He has a strong interest in perception and characterization of signals, optimal filtering, spectral analysis, wavelets, and perception haptics. Dr. Femmam is a senior member of IEEE, SEE and GDR ISIS. Member of IEEE C.A. committee France section. Board of Director of the Institute for Engineering and Technology Innovations in the World. He has guided numerous thesis projects, including some doctoral theses. He is an active reviewer for several scientific academic journals and committee member of international conferences. He is the (Academic, Chief) Editor-in-Chief, Editor, Editorial Board, Guest Editor & Advisory Board members of more than 20 International Journals. He has authored and co-authored more than 90 papers, four Chapters, one edited Book, seven Books published by Wiley & Elsevier.
Characterization of texture, haptic rendering, DSP, real-time interface, real-time transmission, coding and classification, modeling, identification, adaptive control, parametric spectral estimation, time-frequency, wavelets, time-space, multifractals, segmentation, failure detection and compensation, diagnosis, developing mathematical algorithms, perception and recognition of the environment, Zigbee sensor networks.

Ephraim Suhir, PhD

Depts. of Mech, Mat, Elect, and Comp. EngineeringPortland State UniversityPortland, OR, USA
Dr. Ephraim Suhir is on the faculty of the Portland State University, Portland, OR, USA, and Technical University, Vienna, Austria. He is also CEO of the Small Business Innovative Research (SBIR) ERS Co. in Los Altos, CA, USA. Ephraim is Foreign Full Member (Academician) of the National Academy of Engineering, Ukraine (he was born in that country); IEEE Life Fellow of the Institute of Electrical and Electronics Engineers (IEEE), the American Society of Mechanical Engineers (ASME), the Society of Optical Engineers (SPIE), and the International Microelectronics and Packaging Society (IMAPS); and Fellow of the American Physical Society (APS), the Institute of Physics (IoP), UK, and the Society of Plastics Engineers (SPE). He is Associate Fellow of the American Institute of Aeronautics and Astronautics (AIAA). Ephraim has authored 400+ publications (patents, technical papers, book chapters, books), presented numerous keynote and invited talks worldwide, and received many professional awards, including 1996 Bell Laboratories Distinguished Member of Technical Staff (DMTS) Award (for developing effective methods for predicting the reliability of complex structures used in AT&T and Lucent Technologies products), and 2004 ASME Worcester Read Warner Medal for outstanding contributions to the permanent literature of engineering and laying the foundation of a new discipline “Structural Analysis of Electronic Systems”. Ephraim is the third “Russian American”, after S. Timoshenko and I. Sikorsky, who received this prestigious award. This year Ephraim received the 2019 IEEE Electronic Packaging Society (EPS) Field award for seminal contributions to mechanical reliability engineering and modeling of electronic and photonic packages and systems.
o Applied Mathematics, Applied and Mathematical Physics, Materials Science and Engineering, Applied Mechanics
o Design for Reliability (DfR) of Electronic, Opto-Electronic and Photonic Assemblies, Packages and Systems
o Applied Probability and Probabilistic Physical DfR of Electronic and Photonic Devices and Systems
o Analytical (Mathematical) Modeling in Applied Science and Engineering
o Photonics, Fiber Optics, Mechanics of Optical Fibers
o Composite and “Smart” Materials and Systems
o Thin Film Mechanics and Physics
o Shock and Vibration Analyses and Testing,
o Dynamic Response of Materials and Structures to Shocks and Vibrations
o Thermal Stress Analysis,
o Prediction and Prevention of Thermal Stress Failures in Electronic and Optical Engineering
o Solder Materials and Solder Joint Interconnections in Electronic and Optical Engineering
o Polymeric Materials in Electronics and Photonics
o Photovoltaic and Thermo-Electric Modules: Physical Design for Reliability
o Nanotechnologies and Nanomaterials
o Stretchable (Large Area) Electronics and Photonics: Physical Design for Reliability
o Lattice-Misfit Systems: Stress Analysis and Reliability Evaluations
o Technical Diagnostics, Prognostics and Health Monitoring (PHM)
o Vehicular (Automotive, Aerospace, Maritime) Electronics and Photonics: Design for Reliability
o “Human-in-the-Loop”: Human-Equipment/Instrumentation-Environment Performance and Interaction
MEMBERSHIPS
o Foreign Full Member (Academician), National Academy of Engineering and Applied Science, Ukraine,
o Life Fellow,
• Institute of Electrical and Electronics Engineers (IEEE),
• American Society of Mechanical Engineers (ASME),
• International Microelectronics and Packaging Society (IMAPS),
• Society of Optical Engineers (SPIE),
o Fellow,
• Institute of Physics (IoP, UK),
• American Physical Society (APS),
• Society of Plastics Engineers (SPE),
o Associate Fellow, American Institute of Aeronautics and Astronautics (AIAA),
o Member,
• Surface Mount Technology Association (SMTA),
• Society of Automotive Engineers (SAE).

AWARDS
o 2019 IEEE EPS Electronic Packaging Field Award, “for seminal contributions to mechanical reliability engineering and modeling of electronic and photonic packages and systems.” To be bestowed at the IEEE EPS award presentation ceremony, the Cosmopolitan Hotel, Las Vegas, NV, May 30, 2019
o 2018 IMAPS 51-st Int. Symposium on Microelectronics “best of session” Award for the presentation “Elevated stand-off heights of solder joint interconnections of surface mounted IC packages result in an appreciable stress and warpage relief” (co-authored with S. Yi; J. Hwang; and R.Ghaffarian), Pasadena Convention Center, October 8-11, 2018
o 2017 IMAPS Daniel C. Hughes, Jr. Memorial Award, the highest, most prestigious annual honor, awarded to the individual who has the greatest combination of technical achievements related to microelectronics, combined with outstanding contributions supporting the microelectronics industry, academic achievement, or support and service to IMAPS. Recipients of this award automatically become Life Members and Fellows of the Society. Bestowed at the IMAPS award presentation ceremony at the 50th Int. Symp. on Microelectr., Raleigh, NC, October 10, 2017
o 2017 IEEE EPS Exceptional Technical Achievement (ETA) Award “for the development of numerous probabilistic design concepts that enable effective and rapid assessment of the probability of failure of electronic products", bestowed at the IEEE ECTC, Lake Buena Vista, Florida (USA), June 1, 2017.
o 2016 ASME Electronic and Photonic Packaging Division (EPPD) Excellence-in-Mechanics Award “to recognize outstanding contributions to the applications of applied and engineering mechanics to the field of electronic packaging and for contributions to professional activities of electronic and photonic packaging division”, bestowed at the ASME 2016 Int. Mech. Eng. Congress and Exposition (IMECE), Phoenix, AZ, Nov.16, 2016
o 2016 ASME Santa Clara Valley Section Technical Talk Speaker Award “in recognition of your exemplary service and dedication to the highest standards of excellence”; bestowed at the ASME Industry Honors Dinner, Santa Clara, May 05, 2016
o 2015 AIAA Associate Fellowship Award “for valuable contributions to the arts, sciences, and technology of aeronautics and astronautics”
o 2015 ASME Santa Clara Valley Section Invited Speaker Award “for presenting ASME-SCVS Professional Development Seminars”; bestowed at the ASME Industry Honors Dinner, April 09,
o 2014 IEEE CPMT Society Award “for delivering the short course at the 16-th Electronic Packaging Technology Conference”, December 3-5, Singapore
o 2014 IEEE CPMT Society Award “in appreciation of sustained contribution to the ECTC, 25 Years”
o 2014 ASME Santa Clara Valley Section Invited Speaker Award “for presenting ASME-SCVS Professional Development Seminars”; bestowed at the ASME Industry Honors Dinner, April 17
o 2012 SPIE Fellowship Award “for outstanding and pioneering contributions to photonics engineering”
o 2012 IMAPS Fellowship Award “for distinguished contributions to packaging of microelectronic devices”
o 2012 ASME Santa Clara Valley Section Outstanding Achievement Award “for outstanding contribution to the engineering community”; bestowed at the ASME Industry Honors Dinner, April 19
o 2009 IEEE CPMT Society Award “in appreciation of sustained contribution to the ECTC, 10 Years”
o 2008 Fulbright Scholarship in Information Technologies, “as pertinent to the materials and structures in; reliability, physical design, packaging, and modeling of; and risk analyses and probabilistic assessments for, the evaluation of the behavior and performance of hardware and devices in information and communication technologies and systems”
o 2004 ASME Worcester Reed Warner Medal for “outstanding contributions to the permanent literature of engineering through a series of papers in Mechanical, Microelectronic, and Optoelectronic Engineering, which established a new discipline known as the Structural Analysis of Microelectronic and Photonic Systems”,
o 2004 ASME Award “for valued services in advancing engineering education as Member-at-Large of the Professional Development Board”
o 2002 Laser Focus World Award for the paper “Analytical Modeling Plays a Crucial Role in Photonics Engineering”, May
o 2002 APS Fellowship Award “for distinguished contributions to the field of analytical modeling of the physical behavior and reliability of microelectronic and photonic materials and systems”.
o 2001 IMAPS John A. Wagnon Technical Achievement Award “for outstanding contributions to the technical knowledge of the microelectronics, optoelectronics, and packaging industry by advancing the art and science of predictive modeling in these areas, and laying the foundation of a discipline "Structural Analysis in Microelectronics and Photonics Systems” and for providing leadership in the application of Engineering and Applied Mechanics principles and methods to problems of physical design in microelectronics and photonics”.
o 2001 ASME Award for valued services in advancing the engineering profession as keynote speaker on the topic “The Future of Microelectronics and Photonics, and the Role of Packaging”
o 2000 IEEE-CPMT Outstanding Sustained Technical Contribution Award “for outstanding, sustained and continuing contributions to the technologies in fields encompassed by the CPMT Society, and as a recognition of the pioneering work in Materials and Mechanical Engineering related to microelectronics and fiber-optics structures”
o 2000 SPE International Engineering/Technology (Fred O. Conley) Award “for outstanding pioneering and continuing contributions to plastics engineering”
o 1999 ASME (National) Charles Russ Richards Memorial Award “for outstanding contributions to mechanical engineering”
o 1998 SPE Fellowship Award “for distinguished contributions to the scientific and engineering knowledge related to plastics”
o 1998 IEEE CPMT Distinguished Lecturer Award “for teaching successful short courses and tutorials, and presenting invited and key-note talks in the field of Physical (Mechanical) Design and Reliability of Microelectronic and Photonic Systems”
o 1997 ASME INTERPack’97 General Chair Award “for organizing and conducting the International Conference on Microelectronics and Photonics Packaging, Hawaii, June 15-19”
o 1996 Bell Labs Distinguished Member of Technical Staff Award “for developing engineering mechanics methods to predict the performance and reliability of structures, and in manufacturing Lucent Technologies products”, Bell Laboratories
o 1996 ASME Fellowship Award “for outstanding pioneering contributions to several important fields of Applied and Engineering Mechanics, and Materials Science and Engineering”,
o 1994 IEEE Fellowship Award “for distinguished contributions to the field of the application of Engineering Mechanics and Materials Engineering to the analysis and physical design of microelectronic and fiber optic systems”,
o 1994, 1995, 1996 ASME Awards “for valued services in advancing the engineering profession as Member of the Executive Committee and Chairman of the Honors and Awards Committee, ASME, Electrical and Electronic Packaging Division”.
o 1994 ASME Materials Division Award “for valued services in advancing the engineering profession and for presenting the highlight topic lecture "The Future of Microelectronics and Fiber Optics and the Role of Materials and Mechanics''”, International Mechanical Engineering Congress and Exposition
o 1993 AT&T Bell Laboratories Merit (Extraordinary Contribution) Award for “studies on modeling of stresses in, and optimization of manufacturing of, plastic electronic packages and optical fibers”,
o 1992 ASME Clock Award “for distinguished contributions in the field of the application of Engineering Mechanics to Electronic Packaging, and for co-founding the Journal of Electronic Packaging”
o 1990 Outstanding Paper Award “for a paper on mechanical design and reliability of ceramic electronic packages, Institute of Electrical and Electronic Engineers”
o 1986 ISHM Best Paper Award “for a paper on thermal stresses in adhesively bonded and soldered assemblies, International Society for Hybrid Microelectronics”
o 1986 Extraordinary Contribution Award “for studies on analytical stress modeling for advanced VLSI packages”, Bell Laboratories

UNIVERSITY COURSES TAUGHT
o Reliability of electronic and photonic materials, Rutgers University, Piscataway, New Jersey, USA, 1987-1990
o Mechanical design, University of Pennsylvania, Philadelphia, USA, 1990-1992
o Basics of Electronics Reliability, UC-Santa Cruz, Santa Cruz, CA, USA, 2002-2012;
o Reliability Physics of Electronic and Optical Materials, Bordeaux University, Bordeaux, France, 2000-2014
o Fundamentals of Optoelectronics and Photonics, UC-Santa Cruz, Santa Cruz, CA, USA, 2003-2004
o Reliability Physics of Electronics and Photonics Materials, Technical University, Vienna, Austria, 1998-2016
o Smart Systems Integration (SSI) Master Course, European Union supported, Budapest University of Technology, October-November 2014
o Fundamentals of Electronics Reliability, Portland State University, March 2017
23 patents, 16 books, 27 book chapters, numerous papers in archival journals and in edited conference papers, 14 articles in trade magazines, numerous invited, keynote and webinar presentations to different audiences and at different conferences, symposia and technical meetings worldwide, also numerous short courses and tutorials .
Patents
1. C. Dangelo, E. Suhir, S. Dey, B. Wacker, Y. Xu, A. Boren, D. Olsen, Y. Zhang, P. Schwartz; B. Padmakumar, “Carbon nanotube-based structures and methods for removing heat from solid-state devices”, US Patent #8,080,871, 2011
2. E. Suhir, Y. Xu, Y. Zhang, “ Method and apparatus for evaluation and improvement of mechanical and thermal properties of CNT/CNF arrays”, US Patent # 8,048,688, 2011
3. E. Suhir, R. L. Kroeze, P. Schwartz, K. S. Ravindhran, “Composite carbon nanotube-based structures and methods for removing heat from solid-state devices”, US Patent #8,039,961, 2011
4. E. Suhir, “Apparatus for Attaching a Cooling Structure to an Integrated Circuit”, US Patent #7,477,527, 2009
5. D. Ingman, V. Ogenko, E. Suhir, A. Glista, “Moisture Resistant Nano-Particle Material and Its Applications”, US Patent #7,321,714B2, 2008
6. E. Suhir, “Apparatus and Test Device for the Application and Measurement of Prescribed, Predicted and Controlled Contact Pressure on Wires”, US Patent #7,279,916, 2007
7. D. Ingman and E.Suhir, “Optical Fiber with Nano-Particle Overclad”, US Patent, #7,162,138 B2, 2007
8. D. Ingman and E.Suhir, “Optical Fiber with Nano-Particle Cladding”, US Patent, #7,162,137 B2, 2007
9. E. Suhir, “Coated Optical Glass Fiber”, US Patent #6,647,195, 2003.
10. E. Suhir, “Optical Fiber Interconnects Having Offset Ends with Reduced Tensile Strength and Fabrication Method”, US Patent #6,606,434, 2003
11. E. Suhir, “Bi-Material Assembly Adhesively Bonded at the Ends and Fabrication Method”, US Patent #6,460, 753, 2002
12. E. Suhir, “Strain Free Planar Optical Waveguides”, US Patent #6,389,209, 2002
13. E.Suhir, “Apparatus and Method for Thermostatic Compensation of Temperature Sensitive Devices”, US Patent #6,337,932, 2002
14. E.Suhir, “Method of Improving the Performance of Optical Fiber, which is Interconnected Between Two Misaligned Supports”, U.S. Patent #6,314,218, 2001
15. E. Suhir, “Interconnected Optical Devices Having Enhanced Reliability”, U.S. Patent #6,327,411, 2001
16. E. Suhir, “Arrangement for Reducing Bending Stress in an Electronics Package”, U.S. Patent #6,180,241, 2001
17. E. Suhir, “Device and Method of Controlling the Bowing of a Soldered or Adhesively Bonded Assembly,” US Patent #6,239,382, 2001.
18. E. Suhir, “Method for Determining and Optimizing the Curvature of a Glass Fiber for Reducing Fiber Stress”, US Patent #6,016,377, 2000
19. E. Suhir, "Electronic Assembly Having Improved Resistance to Delamination", U.S. Patent #6,028,772, 2000
20. E. Suhir, “Method and Apparatus for Proof-testing Optical Fibers”, US Patent #6,119,527, 1998
21. E. Suhir, “Data Carriers Having an Integrated Circuit Unit”, US Patent #5,703,350, 1997
22. E. Suhir and J. Weld, “Electronic Package with Reduced Bending Stress”, US Patent #5,627,407, 1997.
23. E. Suhir et al, “Pattern For Tube Bending”, Certificate of Authorship #487692, Official Bulletin of Inventions and Discoveries, State Committee for Inventions and Discoveries, No. 38, Moscow, Russia, 1975.
Books
Monographs
24. E. Suhir, “Mechanical Behavior of Electronic Materials and Systems”, agreement with Springer, Sept. 8, 2017
25. E. Suhir, “Human-in-the-Loop: Probabilistic Modeling of an Aerospace Mission Outcome”, CRC Press, 2018
26. E. Suhir, “Applied Probability for Engineers and Scientists”, McGraw Hill, New York, 1997.
27. E. Suhir, “Structural Analysis in Microelectronic and Fiber Optic Systems”, vol.1, Basic Principles of Engineering Elasticity and Fundamentals of Structural Analysis”, Van Nostrand Reinhold, New York, 1991.
28. E. Suhir, P. McSharry, “Soviet Naval Architecture: Theory and Applications of Hydrodynamics (Trans from Russian)”, American Bureau of Shipping, 1986
29. E. Suhir, Y. Raskin, A. Tunik, “Russian Strength Standards for Commercial Ships”, American Bureau of Shipping, 1982
Edited books
30. E. Suhir, D. Steinberg, T. Yi, eds., “Dynamic Response of Electronic and Photonic Systems to Shocks and Vibrations”, John Wiley, 2011
31. X. Fan, E. Suhir, “Moisture Sensitive Plastic Packages of IC Devices”, Springer, 2010
32. E. Suhir, CP Wong, YC Lee, eds. “Micro- and Opto-Electronic Materials and Structures: Physics, Mechanics, Design, Packaging, Reliability”, 2 volumes, Springer, 2008
33. R. G. Driessen, J. G. Baets, J. G. McInerney, and E. Suhir, eds.“Laser Diodes, Optoelectronic Devices, and Heterogeneous Integration”, SPIE, 2003
34. E. Suhir, M. Fukuda, C. R. Kurkjian, eds., “Reliability of Photonic Materials and Structures”, Materials Research Society Symposia Proceedings, vol. 531, 1998.
35. E. Suhir, ed., “Structural Analysis in Microelectronics and Fiber Optics”, ASME Press, 1997
36. E. Suhir, ed., “Structural Analysis in Microelectronics and Fiber Optics”, ASME Press, 1996
37. E. Suhir, ed., “Structural Analysis in Microelectronics and Fiber Optics”, ASME Press, 1995
38. M. Schen, H. Abe, and E. Suhir, eds. “Thermal and Mechanical Behavior and Modeling”, ASME, AMD-Vol,1994
39. E. Suhir, R.C. Cammarata, D.D.L. Chung, M.Jono, eds. “Mechanical Behavior of Materials and Structures in Microelectronics”, Materials Research Society Symposia Proceedings, vol.226, 1991.
Book chapters
40. E.Suhir, “Probabilistic Reliability-Physics Models in Aerospace Human-in-the-Loop (HITL) Problems”, submitted
41. E. Suhir, “Mental Workload (MWL) vs. Human Capacity Factor (HCF) as a Way to Quantify Human Performance: Miracle-on-the-Hudson Quantitative Aftermath”, submitted
42. E. Suhir, “Predicted Thermal and Lattice-Mismatch Stresses”, in T. Nishinaga and T.F.Kuech, eds., “Handbook of Crystal Growth”, 2e, vol.3, , Elsevier, 2015
43. E. Suhir, "Analysis of a Pre-Stressed Bi-Material Accelerated Life Test (ALT) Specimen", Encyclopedia of Thermal Stresses, R. Hetnarski, ed., Springer, 2013
44. E. Suhir, "Thermal Stress in a Multi-Leg Thermoelectric Module (TEM) Design", Ibid.
45. E. Suhir, "Thermal Stress in a Tri-Materilal Assembly with Application to Silicon-Based Photovoltaic Module (PVM)", Ibid.
46. E. Suhir, "Thermoelastic Stability of an Embedded Nano-Fiber", Ibid.
47. E. Suhir, “Linear Response to Shocks and Vibrations”, in E. Suhir, D. Steinberg and T. Yu, “Structural Dynamics of Electronic and Photonic Systems”, John Wiley, Hoboken, NJ., 2011
48. E. Suhir, “Linear and Nonlinear Vibrations Caused by Periodic Impulses”. Ibid
49. E. Suhir, “Random Vibrations of Structural Elements in Electronic and Photonic Systems”, Ibid
50. C.Y.Zhou, T.X.Yu, S.W.Ricky Lee and E.Suhir, “Shock Test Methods and Test Standards for Portable Electronic Devices”, Ibid
51. E. Suhir, “Shock Protection of Portable Electronic Devices Using a “Cushion” of an Array of Wires (AOW)”, Ibid
52. M. Vujosevic and E.Suhir, “Dynamic Response of PCB Structures to Shock Loading in Reliability Tests”, Ibid
53. E. Suhir, “Linear Response of a Single-Degree-of-Freedom System to an Impact Load: Could Shock Tests Adequately Mimic Drop Test Conditions?”, Ibid
54. E. Suhir and L. Arruda, “Could an Impact Load of Finite Duration Be Substituted with an Instantaneous Impulse”? Ibid
55. E. Suhir, “”Stretchable” Electronics: Predicted Thermo-Mechanical Stresses in the Die”, Fraunhofer Institute, Volume Dedicated to the 60-th Birthday of Prof. B. Michel, Berlin, Germany, 2009
56. Y. Zhang, E. Suhir, C. Gu, “Physical Properties and Mechanical Behavior of Carbon Nano-tubes (CNTs) and Carbon Nano-fibers (CNFs) as Thermal Interface Materials (TIMs) for High Power Integrated Circuit (IC) Packages: Review and Extension, in C.P.Wong et al, eds, “Nano-Bio-Electronic, Photonic and MEMS Packaging”, Springer, 2009
57. E. Suhir, “Fiber-Optics Structural Mechanics and Nano-Technology Based New Generation of Fiber Coatings: Review and Extension”, in E. Suhir, CP Wong, YC Lee, eds. “Micro- and Opto-Electronic Materials and Structures: Physics, Mechanics, Design, Packaging, Reliability”, 2 volumes, Springer, 2008
58. E. Suhir, “Dynamic Response of Micro-Electronic Systems to Shocks and Vibrations: Review and Extension”, Ibid
59. V. Birman and E. Suhir, “Effect of Material’s Nonlinearity on the Mechanical Response of Some Piezo-Electric and Photonic Systems”, Ibid
60. E. Suhir, “Analytical Thermal Stress Modeling in Physical Design for Reliability of Micro- and Opto-Electronic Systems: Role, Attributes, Challenges, Results”, Ibid
61. E. Suhir, “How to Make a Device into a Product: Accelerated Life Testing It’s Role, Attributes, Challenges, Pirfalls, and Interaction with Qualification Testing”, Ibid
62. E. Suhir, D. Ingman, “Highly Compliant Bonding Material and Structure for Micro- and Opto-Electronic Applications”, Ibid
63. E. Suhir, “Effect of Plastic Package Geometry on its Propensity to Moisture Induced Failure”, in R. Tummala, M. Kosec, W. Kinzy Jones and D. Belavic, eds., “Electronic Packaging for High Reliability: Low Cost Electronics”, NATO ASI Series, 3. “High Technology”, vol.57, Kluwer Academic Publishers, 1999.
64. E. Suhir, “Structural Analysis in Fiber Optics”, in J. Menon, ed., “Trends in Lightwave Technology”, Council of Scientific Information, India, 1995.
65. E. Suhir, “Predicted Bow of Plastic Packages of Integrated Circuit Devices”, in J. H. Lau, ed., Thermal Stress and Strain in Microelectronic Packaging”, Van Nostrand Reinhold, New York, 1993.
66. E. Suhir and Y.C. Lee, “Thermal, Mechanical and Environmental Durability Design Methodologies in Electronic Packaging”, in “Handbook of Electronic Materials”, ASM International, 1990.
67. E. Suhir, “Thermal Stress Failures in Microelectronic Components - Review and Extension”, in A. Bar-Cohen and A. D. Kraus, eds., “Advances in Thermal Modeling of Electronic Components and Systems”, Hemisphere, New York, 1988.
Archival (peer reviewed) journal papers
2019
68. E.Suhir, “Interfacial Shearing Stresses and Warpage of Flip-Chip Packages: Application of Analytical Thermal Stress Modeling”, Scholar Journal of Applied Sciences and Research, submitted
69. E. Suhir, “Assessment of the Required Human Capacity Factor (HCF) Using Flight Simulator as an Appropriate Accelerated Test Vehicle”, IJHFMS, accepted
70. E.Suhir, “To burn-in, or not to burn-in: that’s the question”, Aerospace Journal, accepted
71. E. Suhir and R. Ghaffarian, “Predicted Effect of the Underfill Glass Transition Temperature on Thermal Stresses in a Flip-Chip or a Fine-Pitch BGA Design”, Journal of Electrical and Electronic Systems, accepted
72. E.Suhir, “Making a Viable Medical Electron Device Package into a Reliable Product”, IMAPS Advancing Reliability, in print
73. E.Suhir, “Analytical Thermal Stress Modeling in Electronics and Photonics Engineering: Application of the Concept of Interfacial Compliance”, Journal of Thermal Stresses, special issue dedicated to 90-th birthday of Prof. Richard Hetnarski, in print
74. E.Suhir, S.Yi, J.S.Hwang, R. Ghaffarian, “Elevated Stand-Off Heights of Solder Joint Interconnections Can Result in Appreciable Stress and Warpage Relief”, IMAPS J. of Microelectronics and Electronic Packaging”, in print
75. E. Suhir and R. Ghaffarian, “Electron Device Subjected to Temperature Cycling: Predicted Time-to-Failure”, Journal of Electronic Materials, vol.48, No.2, 2019
2018
76. E.Suhir and R. Ghaffarian, “Constitutive Equation for the Prediction of an Aerospace Electron Device Performance-Brief Review”, Aerospace, vol.5, No.74, 2018
77. E.Suhir, “Low-Cycle-Fatigue Failures of Solder Material in Electronics: Analytical Modeling Enables to Predict and Possibly Prevent Them-Review”, Journal of Aerospace Engineering and Mechanics, 2(1), 2018
78. E. Suhir. “Solder Joints in Surface Mounted IC Assemblies: Relief in Stress and Warpage Owing to the Application of Elevated Stand-off Heights”. Journal of Modern Applied Physics, 2(1), March 2018.
79. E. Suhir and R. Ghaffarian, “Flip-Chip (FC) and Fine-Pitch-Ball-Grid-Array (FPBGA) Underfills for Application in Aerospace Electronics Packages – Brief Review”, Aerospace, 5(3), 74, July 2018
80. E. Suhir, “Aerospace Mission Outcome: Predictive Modeling”, editorial, Special Issue “Challenges in Reliability Analysis of Aerospace Electronics”, Aerospace, May 22, 2018
81. E.Suhir, “What Could and Should Be Done Differently: Failure-Oriented-Accelerated-Testing (FOAT) and Its Role in Making an Aerospace Electronics Device into a Product”, Journal of Materials Science: Materials in Electronics, vol.29, No.4, 2018
82. E.Suhir, “Analytical Thermal Stress Model for a Typical Flip-Chip Package Design”, Journal of Materials Science: Materials in Electronics, vol.29, No.4, 2018
83. E. Suhir, “Solder Joints in Surface Mounted IC Assemblies: Relief in Stress and Warpage Owing to the Application of Elevated Stand-off Heights”. J of Modern Applied Physics,2(1), 2018
2017
84. E.Suhir, “Aerospace Electronics Reliability Prediction: Application of Two Advanced Probabilistic Techniques”, ZAMM, vol.1, No.16, 2017
85. E. Suhir, “Flip-Chip Assembly: Is a Bi-Material Model Acceptable?”, Journal of Materials Science: Materials in Electronics, Vol. 28, No. 21, 2017.
86. E.Suhir, “Analytical Modeling Enables Explanation of Paradoxical Behaviors of Electronic and Optical Materials and Assemblies”, Advances in Materials Research, vol.6, No.2, 2017
87. E. Suhir, “Human-in-the-Loop: Application of the Double Exponential Probability Distribution Function Enables One to Quantify the Role of the Human Factor”, Int. J. of Human Factor Modeling and Simulation, v.5, No.4, 2017
88. E. Suhir and R. Ghaffarian, “Predictive Modeling of the Dynamic Response of Electronic Systems to Impact Loading: Review”, ZAMM, 97, No. 6, 699–717, 2017
89. E. Suhir, and S. Yi, “Probabilistic Design for Reliability (PDfR) of Medical Electronic Devices (MEDs): When Reliability is Imperative, Ability to Quantify it is a Must”, Journal of SMT, v. 30, Issue 1, 2017
90. E. Suhir, S. Yi and R. Ghaffarian, “How Many Peripheral Solder Joints in a Surface Mounted Design Experience Inelastic Strains?”, Journal of Electronic Materials, v.46, No.3, 2017
91. E. Suhir, “Static Fatigue Lifetime of Optical Fibers Assessed Using Boltzmann-Arrhenius-Zhurkov (BAZ) Model”, Journal of Materials Science: Materials in Electronics, v.28, No.16, 2017
92. E. Suhir, R.Ghaffarian, S.Yi, and J.Nicolics “Assessed Interfacial Strength and Elastic Moduli of the Bonding Material from Shear-off Test Data”, Journal of Materials Science: Materials in Electronics, v.28, No.9, 2017
93. E. Suhir and R. Ghaffarian, “Solder Material Experiencing Low Temperature Inelastic Thermal Stress and Random Vibration Loading: Predicted Remaining Useful Lifetime”, Journal of Materials Science: Materials in Electronics, vol.28, No.4, 2017
94. E. Suhir and R. Ghaffarian, “Probabilistic Palmgren-Miner Rule with Application to Solder Materials Experiencing Elastic Deformations”, Journal of Materials Science: Materials in Electronics, vol.28, No.3, 2017
95. E. Suhir, and R. Ghaffarian, “Reliability Physics Behind the QFN State of Stress”, Journal of Materials Science: Materials in Electronics, v.28, No.2, 2017
2016
96. E. Suhir, R. Ghaffarian, “Column-Grid-Array (CGA) vs. Ball-Grid-Array (BGA): Board-Level Drop Test and the Expected Dynamic Stress in the Solder Material”, Journal of Materials Science: Materials in Electronics, vol.27, No.11, 2016
97. E. Suhir, S. Yi, G. Khatibi, J. Nicolics, M. Lederer, “Semiconductor Film Grown on a Circular Substrate: Predictive Modeling of Lattice-Misfit Stresses”, Journal of Materials Science: Materials in Electronics, vol.27, No.9, 2016
98. E. Suhir, R. Ghaffarian, “Board Level Drop Test: Exact Solution to the Problem of the Nonlinear Dynamic Response of a PCB to the Drop Impact”, Journal of Materials Science: Materials in Electronics, vol.27, No.9, 2016
99. E. Suhir, “Analytical Modeling Occupies a Special Place in the Modeling Effort”, Short Comm., J.Phys.Math., 7(1), 2016
100. E. Suhir, J. Morris, L. Wang, and S. Yi, “Could the Dynamic Strength of a Bonding Material in an Electronic Device Be Assessed from Static Shear-Off Test Data?”, Journal of Materials Science: Materials in Electronics, vol.27, No.7, 2016
101. E. Suhir, and J.Nicolics, “Power Core (PC) Embedding a Plurality of IC Devices and Sandwiched Between Two Dissimilar Insulated Metal Substrates (IMS’): Predicted Thermal Stresses”, Journal of Materials Science: Materials in Electronics, vol.27, No.7, 2016
102. E. Suhir, “Bi-Material Assembly Subjected to Thermal Stress: Propensity to Delamination Assessed Using Interfacial Compliance Model”, Journal of Materials Science: Materials in Electronics, vol.27, No.7, 2016
103. E. Suhir, “Expected Stress Relief in a Bi-Material Inhomogeneously Bonded Assembly with a Low-Modulus-and/or-Low-Fabrication-Temperature Bonding Material at the Ends”, Journal of Materials Science: Materials in Electronics, vol.27, No.6, 2016
104. E. Suhir, R. Ghaffarian, "Predicted Stresses in a Ball-Grid-Array (BGA)/Column-Grid-Array (CGA) Assembly with Epoxy Adhesive at Its Ends", Journal of Materials Science: Materials in Electronics, vol.27, No.5, 2016
105. E. Suhir, “Bi-Material Assembly with a Low-Modulus-and/or-Low-Fabrication-Temperature Bonding Material at Its Ends: Optimized Stress Relief”, Journal of Materials Science: Materials in Electronics, vol.27, No.5, 2016
106. E. Suhir, R. Ghaffarian, J. Nicolics,, “Predicted Stresses in Ball-Grid-Array (BGA) and Column-Grid-Array (CGA) Interconnections in a Mirror-like Package Design”, Journal of Materials Science: Materials in Electronics, vol.27, No.3, 2016
107. E. Suhir, R. Ghaffarian, J. Nicolics, “Could Thermal Stresses in an Inhomogeneous BGA/CGA System be Predicted Using a Model for a Homogeneously Bonded Assembly?”, Journal of Materials Science: Materials in Electronics, vol.27, No. 1, 2016
2015
108. E. Suhir, "Predicted Stresses in a Ball-Grid-Array (BGA)/Column-Grid-Array (CGA) Assembly with a Low Modulus Solder at Its Ends", Journal of Materials Science: Materials in Electronics, vol.26, No.12, 2015
109. E. Suhir, “Analytical Modeling Enables One to Explain Paradoxical Situations in the Behavior and Performance of Electronic Materials and Products: Review”, Journal of Physical Mathematics 07(01) · Dec. 2015
110. E. Suhir, “Analysis of a Short Beam with Application to Solder Joints: Could Larger Stand-off Heights Relieve Stress?”, European Journal of Applied Physics (EPJAP), vol. 71, 2015
111. A. Bensoussan, E. Suhir, P. Henderson, M. Zahir, “A Unified Multiple Stress Reliability Model for Microelectronic Devices — Application to 1.55 μm DFB Laser Diode Module for Space Validation”, Microelectronics Reliability, June 2015
112. E. Suhir, R. Ghaffarian, J. Nicolics, “Could Application of Column-Grid-Array Technology Result in Inelastic-Strain-Free State-of-Stress in Solder Material?”, Journal of Materials Science: Materials in Electronics, vol.26, No.12, 2015
113. E. Suhir, "Analytical Bathtub Curve with Application to Electron Device Reliability", Journal of Materials Science: Materials in Electronics, vol. 26, Issue 9, 2015.
2014
114. E. Suhir, “Human-in-the-loop (HITL): Probabilistic Predictive Modeling (PPM) of an Aerospace Mission/Situation Outcome”, Aerospace, No.1, 2014
115. E. Suhir and A. Bensoussan, "Quantified Reliability of Aerospace Optoelectronics," SAE Int. J. Aerosp. 7(1), 2014
116. E. Suhir and J. Nicolics, “Analysis of a Bow-Free Pre-Stressed Test Specimen”, ASME JAM, vol.81, No.11, 2014
117. E. Suhir, “Three-Step Concept in Modeling Reliability: Boltzmann-Arrhenius-Zhurkov Physics-of-Failure-Based Equation Sandwiched Between Two Statistical Models”, Microelectronics Reliability, Oct. 2014
118. E. Suhir, “Compressed Cantilever Beam on an Elastic Foundation, with Application to a Dual-Coated Fiber-Optic Connector”, Int. Journal of Engineering Sciences, vol.83, Oct. 2014
119. E. Suhir, “Human-in-the-loop: Probabilistic Predictive Modeling, Its Role, Attributes, Challenges and Applications”, Theoretical Issues in Ergonomics Science (TIES), published on line, July 2014
120. E. Suhir, C. Bey, S. Lini, J.-M. Salotti, S. Hourlier, B. Claverie, “Anticipation in Aeronautics: Probabilistic Assessments”, Theoretical Issues in Ergonomics Science, published on line, June 2014
121. A. Ziabari, E.Suhir, A. Shakouri, “Minimizing Thermally Induced Interfacial Shearing Stress in a Thermoelastic Module with Low Fractural Area Coverage”, Microelectronics Reliability, Vol. 45, Issue 5, May 2014
122. E. Suihir, “Fiber Optics Engineering: Physical Design for Reliability”, Facta Universitatis: series Electronics and Energetics", Vol. 27, No 2, June 2014
123. E. Suhir, “Thermal Stress in Through-Silicon-Vias: Theory-of-Elasticity Approach”, Microelectronics Reliability, vol.54, 2014
124. E. Suhir, “Statistics- and Reliability-Physics-Related Failure Processes”, Modern Physics Letters B (MPLB), Vol. 28, No. 13, 2014
125. J.-M. Salotti and E. Suhir, “Manned Missions to Mars: Minimizing Risks of Failure”, Acta Astronautica, Vol. 93, January 2014
2013
126. E. Suhir, S. Kang, J. Nicolics, C. Gu, A. Bensoussan, L. Bechou, “Predicted Thermal Stresses in a Cylindrical Tri-Material Body, with Application to Optical Fibers Embedded into Silicon", J. of Electrical and Control Engineering, Vol.3 No.6, December 2013
127. E. Suhir, “Lattice-Misfit Stresses in a Circular Bi-Material Gallium-Nitride Assembly”, ASME J. Appl. Mech., vol.80, January 2013
128. E. Suhir, “How Long Could/Should be the Repair Time for High Availability?”, Modern Physics Letters B (MPLB), vol.27, Aug.30, 2013
129. E. Suhir, “Could Electronics Reliability Be Predicted, Quantified and Assured?” Microelectronics Reliab., No. 53, April 15, 2013
130. E. Suhir, S. Kang, “Boltzmann-Arrhenius-Zhurkov (BAZ) Model in Physics-of-Materials Problems”, Modern Physics Letters B (MPLB), vol.27, April 2013
131. E. Suhir, “Structural Dynamics of Electronics Systems”, Modern Physics Letters B (MPLB), Vol. 27, No. 7, March 2013
132. E. Suhir, “Thermal Stress Failures in Electronics and Photonics: Physics, Modeling. Prevention”, J. Thermal Stresses, Vol.36, No.6, June 3, 2013
133. E. Suhir, ”“Miracle-on-the-Hudson”: Quantified Aftermath”, Int. J. Human Factors Modeling and Simulation, April 2013
134. E. Suhir and A.Shakouri, “Predicted Thermal Stresses in a Multi-Leg Thermoelectric Module (TEM) Design”, ASME J. Appl. Mech., vol. 80, March 2013
135. E. Suhir, D. Shangguan, L. Bechou, “Predicted Thermal Stresses in a Tri-Material Assembly with Application to Silicon-Based Photovoltaic Module ”, ASME J. Appl. Mech., vol.80, March 2013
136. E. Suhir, L.Bechou, B. Levrier, “Predicted Size of an Inelastic Zone in a Ball-Grid-Array Assembly”, ASME J. Appl. Mech., vol. 80, March 2013
2012
137. W. Benhadjala, I. Bord-Majek, L. Bechou, E. Suhir, M.Buet, F. Rougé, V. Gaud, B. Plano, Y. Ousten, "Improved Performances of Polymer-Based Dielectric by Using Inorganic/Organic Core-Shell Nanoparticles", Appl. Phys. Lett., 101, 142901, Oct. 2012
138. E. Suhir, A. Shakouri, “Assembly Bonded at the Ends: Could Thinner and Longer Legs Result in a Lower Thermal Stress in a Thermoelectric Module (TEM) Design?”, ASME J. Appl. Mech., vol.79, No.6, 2012
139. E. Suhir, “When Reliability is Imperative, Ability to Quantify It is a Must”, IMAPS Advanced Microelectronics, August 2012
140. E. Suhir, D. Shangguan, L .Bechou, “Predicted Thermal Stresses in a Photovoltaic Module (PVM)”, PV International (UK), Second Quarter, May 2012
141. E. Suhir, J. Nicolics, “Bending of a Bi-Material Cantilever Beam, with Consideration of the Role of the Interfacial Shearing Stress”, ZAMM, vol.92, No.7, 2012
142. E. Suhir, “Likelihood of Vehicular Mission-Success-and-Safety”, J. of Aircraft, vol.49, No.1, 2012
2011
143. E. Suhir, “Remaining Useful Lifetime (RUL): Probabilistic Predictive Model”, Int. J. of PHM, vol 2(2), 2011
144. E. Suhir, W.Gschohsmann, J. Nicolics, “Analysis of a Bi-Material Strip”, Z. Angew. Math. Mech., 1 - 9 2011
145. E. Suhir, “Stresses in Bi-Material GaN Assemblies”, J. Appl. Physics, 110 (7), 2011
146. E. Suhir, “Predicted Response of the Die-Carrier Assembly to the Combined Action of Tension and Bending Applied to the Carrier in Flexible Electronics”, ASME J. Appl. Mech., vol. 79, No.1, 2011
147. E. Suhir, C.Gu, L.Cao, “Predicted Thermal Stress in a Circular Adhesively Bonded Assembly with Identical Adherends”, ASME J. Appl. Mech, vol. 79, No.1, 2011
148. E. Suhir, “Elastic Stability of a Rod Supported by an Elastic Foundation, with Application to Nano-Composites”, ASME J. Appl. Mech, vol. 79, No.1, 2011
149. W. Gschohsmann, J. Nicolics, E. Suhir, “Deformations in Stretched Surface Mounted Ceramic Strips for Sensor Applications”, Microelectronics International, vol.28, Issue 3, 2011
150. E. Suhir, “Thermal Stress Failures: Predictive Modeling Explains the Reliability Physics Behind Them”, IMAPS Advanced Microelectronics, vol.38, No.4, July/August 2011
151. E. Suhir, “Predictive Modeling of the Dynamic Response of Electronic Systems to Shocks and Vibrations”, ASME Appl. Mech. Reviews, vol. 63, No.5, March, 2011
152. E. Suhir, “Analysis of a Pre-Stressed Bi-Material Accelerated Life Test (ALT) Specimen”, Zeitschrift fur Angewandte Mathematik und Mechanik (ZAMM), vol.91, No.5, 2011
153. E. Suhir and R. H. Mogford, “"Two Men in a Cockpit": Probabilistic Assessment of the Likelihood of a Casualty if One of the Two Navigators Becomes Incapacitated”, J. of Aircraft, vol.48, No.4, July-August 2011
2010
154. W. Gschohsmann, J. Nicolics, E. Suhir, “Elastizitätsmodell eines keramischen Sensorstreifens bei longitudinaler Verformung”, Elektrotechnik und Informationstechnik, Vol. 127, No.10, October 2010
155. E. Suhir, “Probabilistic Modeling of the Role of the Human Factor in the Helicopter-Landing-Ship (HLS) Situation”, Int. J. Human Factor Modeling and Simulation (IJHFMS), vol.1, Issue 3, 2010
156. E. Suhir, W. Gschohsmann, J. Nicolics, “Analysis of an Elongated Stretched Strip, With Application to a Strain-Gage Electrical Sensor Structure’, ZAMM, No.10, 2010
157. E.Suhir, “Predicted Stresses in Die-Carrier Assemblies in “Stretchable” Electronics: Is There an Incentive for Using a Compliant Bond?”, ZAMM, No.10, 2010
158. E. Suhir and L.Arruda, “Could an Impact Load of Finite Duration Acting on a Duffing Oscillator Be Substituted with an Instantaneous Impulse?”, JSME J. Solid Mech. and Materials Engineering (JSMME), vol.4, No.9, 2010
159. E. Suhir and T. Reinikainen, “Interfacial Stresses in a Lap Shear Joint (LSJ): The “Transverse Groove Effect” (TGE)”, JSME J. Solid Mech. and Materials Engineering (JSMME), vol.4, No.8, 2010
160. E. Suhir and M.Vujosevic, “Bi-Material Assembly Subjected to Tensile Forces and Bending Moments Applied to the Ends of One of Its Components”, JSME J. Solid Mech. and Materials Engineering (JSMME), vol.4, No.4, 2010
161. E. Suhir, “Optical Fiber Interconnects: Design for Reliability”, Society of Optical Engineers (SPIE), Proc. of SPIE, Vol. 7607 760717-8, 2010
2009
162. E. Suhir and L. Arruda, “The Coordinate Function in the Problem of the Nonlinear Dynamic Response of an Elongated Printed Circuit Board (PCB) to a Drop Impact Applied to Its Support Contour”, European J. Appl. Physics, vol.48, No.2, 2009
163. C.Y.Zhou, T.X.Yu, E.Suhir, “Design of Shock Table Tests to Mimic Real-Life Drop Conditions”, IEEE CPMT Transactions, vol.32, No.4, 2009
164. Biswas, I.S. Bayer, A. Tripathi, E.H.Lock, S.G. Walton, M.G. Norton, D.K. Avasthi, D.H.Dahanayaka, L.A.Bumm, E.Suhir, A.R. Chowdhury, R. Gupta, “Fabrication of Nanoelectric Composites Exhibiting Stable Capacitor Functions in the High Frequency (≥100MHz) Through Interfacial Polarization Interactions”, Nanoscience and Nanotechnology Letters, vol.1, 1-8, 2009
165. I.S. Biswas, D.H.Bayer, L.A. Dahanayaka, Z. Bumm, F, Li, R. Watanabe, Y. Sharma, A.S.. Xu, M.G. Norton, E. Suhir, “Tailored Polymer-Metal Fractal Nanocomposites: An Approach to highly Active SERS Substrates”, Nanotechnology, 20, 2009
166. E. Suhir, “On a Paradoxical Situation Related to Bonded Joints: Could Stiffer Mid-Portions of a Compliant Attachment Result in Lower Thermal Stress?”, JSME J. Solid Mech. and Materials Engineering (JSMME), vol.3, No.7, 2009
167. E .Suhir, “Helicopter-Landing-Ship: Undercarriage Strength and the Role of the Human Factor”, ASME OMAE Journal, vol. 132, No.1, Dec. 22, 2009
168. E. Suhir, “Probabilistic Modeling of the Role of the Human Factor in the Helicopter Landing Ship (HLS) Situation”, International Journal of Human Factor Modeling and Simulation (IJHFMS), 2009
169. E. Suhir, “Analytical Thermal Stress Modeling in Electronic and Photonic Systems”, ASME App. Mech. Reviews, invited paper, vol.62, No.4, 2009.
170. E. Suhir and T. Reinikainen, “Interfacial Stresess and a Lap Shear Joint (LSJ): The “Transverse Groove Effect” (TGE)”, JSME J. Solid Mech. and Materials Engineering (JSMME), vol.3, No.6, 2009
171. E. Suhir, M. Vujosevic, and T. Reinikainen, “Nonlinear Dynamic Response of a “Flexible-and-Heavy” Printed Circuit Board (PCB) to an Impact Load Applied to Its Support Contour”, J. Appl. Physics, D, 42, No.4, 2009
172. E. Suhir, “Thermal Stress in a Bi-Material Assembly with a “Piecewise-Continuous” Bonding Layer: Theorem of Three Axial Forces”, J. Appl. Physics, D, 42, 2009
2008
173. E. Suhir and M. Vujosevic, “Interfacial Stresses in a Bi-material Assembly with a Compliant Bonding Layer”, J. Appl. Physics D, vol.41, 2008
174. E. Suhir and T. Reinikainen, “On a Paradoxical Situation Related to Lap Shear Joints: Could Transverse Grooves in the Adherends Lead to Lower Interfacial Stresses?”, J. Appl. Physics D, vol.41, 2008
175. E. Suhir, “Lateral Compliance of a Compressed Cantilever Beam, with Application to Micro-Electronic and Fiber-Optic Structures”, J. Appl. Physics D, vol.41,No.1, 2008
176. I.S.Bayer, A.Biswas, J.B.Szczech, E.Suhir, M.G.Norton, “Radio Frequency Functional Capacitors Made of All-Organic Composites of Thiourea in Field-Responsive Polymers for Embedded Applications”, Applied Physics Letters, vol. 92, No.1, 2008.
2007
177. T. Mirer, D. Ingman, E. Suhir, “Reliability Improvement Through Nano-Particle-Material-Based Fiber Structures”, Optical Fiber Technology, v. 13, 2007
178. E. Suhir, “Elastic Stability of a Dual-Coated Optical Fiber of Finite Length”, J. Appl. Physics, vol.102, No.5, 2007
179. E. Suhir, “Response of a Heavy Electronic Component to Harmonic Excitations Applied to Its External Electric Leads”, Elektrotechnik & Informationstechnik (Austria), vol.9, 2007
180. E. Suhir, “Elastic Stability of a Dual-Coated Optical Fiber with a Stripped Off Coating at Its End”, Journal of Applied Physics, vol. 102, No.4, 2007
2006
181. E.Suhir, “Interfacial Thermal Stresses in a Bi-Material Assembly with a Low-Yield-Stress Bonding Layer”, Modeling and Simulation in Materials Science and Engineering, vol. 14, 2006
182. Y. Xu, Y. Zhang, E. Suhir, and X. Wang, ” Thermal Properties of Carbon Nanotube Array for Integrated Circuits Cooling” J. Appl. Physics, 100, 074302, 2006
183. Y. Zhang, Y. Xu and E. Suhir, “Effect of Rapid Thermal Annealing (RTA) on Thermal Properties of Carbon Nanofibre (CNF) Arrays”, J. Appl. Physics D: Applied Physics ,39, 2006
184. Y. Zhang, Y. Xu and E. Suhir, “Effective Young’s Modulus of Carbon Nano-Fiber Array”, J. Materials Research (JMR),vol.21, No.11, Nov. 2006
185. Y. Zhang, E. Suhir, Y. Xu, and C. Gu, “ Bonding Strength of Carbon Nanofiber Array to its Substrate”, JMR, vol. 21, No.11, Nov.2006
2003
186. E. Suhir, “Thermal Stress in an Adhesively Bonded Joint with a Low Modulus Adhesive Layer at the Ends”, J. Appl. Phys., April 2003
187. E. Suhir, “Modeling of Thermal Stress in Microelectronic and Photonic Structures: Role, Attributes, Challenges and Brief Review”, Special Issue, ASME J. Electr. Packaging (JEP), vol.125, No.2, June 2003
188. E. Suhir, “Bow Free Adhesively Bonded Assemblies: Predicted Stresses”, Electrotechnik & Informationtechnik, 120 (6), June 2003
2002
189. E. Suhir, “Accelerated Life Testing (ALT) in Microelectronics and Photonics: Its Role, Attributes, Challenges, Pitfalls, and Interaction With Qualification Tests”, ASME J. Electr. Packaging (JEP), Vol. 124, No. 3, 2002
190. E.Suhir, “Could Shock Tests Adequately Mimic Drop Test Conditions?”, J. Electr. Packaging (JEP), July, 2002
2001
191. E. Suhir, “Thermal Stress in a Polymer Coated Optical Glass Fiber with a Low Modulus Coating at the Ends”, J. Mat. Res., vol. 16, No. 10, 2001
192. M. Ushitsky, E. Suhir, G.W. Kammlott, “Thermoelastic Behavior of Filled Molding Compounds: Composite Mechanics Approach”, ASME J. Electr. Pack., vol.123, No.4, 2001
193. E. Suhir, "Analysis of Interfacial Thermal Stresses in a Tri-Material Assembly", J. Appl. Physics, vol.89, No.7, 2001
194. E. Suhir, “Thermal Stress in a Bi-Material Assembly Adhesively Bonded at the Ends”, J. Appl. Physics, vol. 89, No.1, 2001.
195. M. Uschitsky and E. Suhir, “Moisture Diffusion in Epoxy Molding Compounds Filled with Particles", ASME J. Electr. Pack., vol.123, No.1, 2001
2000
196. E. Suhir, “Microelectronics and Photonics – the Future”, Microelectronics Journal, vol.31, No.11-12, 2000
197. E. Suhir, and J.J. Vuillamin, Jr, "Effects of the CTE and Young's Modulus Lateral Gradients on the Bowing of an Optical Fiber: Analytical and Finite Element Modeling", Optical Engineering, vol. 39, No. 12, 2000
198. E. Suhir, “Predicted Fundamental Vibration Frequency of a Heavy Electronic Component Mounted on a Printed Circuit Board”, ASME J. Electr. Packaging (JEP), vol.122, No.1, 2000
199. E.Suhir, “Modeling of the Mechanical Behavior of Materials in “High-Tech” Systems: Attributes and Review”, ASME J. Electr. Packaging (JEP), vol.121, No.3, 2000
200. E. Suhir, “Thermal Stress Modeling in Microelectronics and Photonics Packaging, and the Application of the Probabilistic Approach: Review and Extension”, IMAPS Int. J. Microcircuits and Electronic Packaging, vol.23, No.2, 2000 (invited paper)
201. E. Suhir, “Predicted Stresses in, and the Bow of, a Circular Substrate/Thin-Film System Subjected to the Change in Temperature”, J. Appl. Physics, vol.88, No.5, 2000
202. E.Suhir, “Optical Fiber Interconnect with the Ends Offset and Axial Loading: What Could Be Done to Reduce the Tensile Stress in the Fiber”?, J. Appl. Physics, vol.88, No.7, 2000
203. E. Suhir, “Adhesively Bonded Assemblies with Identical Non-deformable Adherends and “Piecewise Continuous” Adhesive Layer: Predicted Thermal Stresses and Displacements in the Adhesive”, Int. J. Solids and Structures, vol.37, 2000
1999
204. E. Suhir, “Adhesively Bonded Assemblies with Identical Non-deformable Adherends: Predicted Thermal Stresses in the Adhesive Layer”, Composite Interfaces, vol.6, No.2, 1999
205. E. Suhir, “Optimized Configuration of an Optical fiber “Pigtail” Bent on a Cylindrical Surface”, in T. Winkler and A, Schubert, eds., “Materials Mechanics, Fracture Mechanics, Micromechanics”, An Anniversary Volume in Honor of B. Michel’s 50th Birthday, Fraunhofer IZM, Berlin, 1999
1998
206. E. Suhir, “Adhesively Bonded Assemblies with Identical Non-deformable Adherends and Inhomogeneous Adhesive Layer: Predicted Thermal Stresses in the Adhesive”, J. Reinforced Plastics and Composites, vol.17, No.14, 1998
207. E. Suhir, “Fiber Optic Structural Mechanics – Brief Review”, Editor’s Note, ASME J. Electr. Packaging (JEP), September 1998.
208. E. Suhir, “The Future of Microelectronics and Photonics and the Role of Mechanics and Materials”, ASME J. Electr. Packaging (JEP), March 1998
1997
209. E. Suhir, "Bending of a Partially Coated Glass Fiber Subjected to the Ends Off-Set", IEEE CPMT Transactions, June 1997.
210. E. Suhir, “Predicted Thermal Mismatch Stresses in a Cylindrical Bi-Material Assembly Adhesively Bonded at the Ends”, ASME J. Appl. Mech., vol.64, No. 1, 1997.
211. E. Suhir, “Is the Maximum Acceleration an Adequate Criterion of the Dynamic Strength of a Structural Element in an Electronic Product?”, IEEE CPMT Transactions, Part A, vol.20, No.4, December 1997.
212. E. Suhir, “Probabilistic Approach to Evaluate Improvements in the Reliability of Chip-Substrate (Chip-Card) Assembly“, IEEE CPMT Transactions, Part A, vol. 20, No. 1, 1997.
213. E. Suhir, “Failure Criterion for Moisture-Sensitive Plastic Packages of Integrated Circuit (IC) Devices: Application of von-Karman Equations with Consideration of Thermoelastic Strains”, Int. Journal of Solids and Structures, vol. 34, No. 12, 1997
1996
214. E. Suhir, “Predicted Curvature and Stresses in an Optical Fiber Interconnect Subjected to Bending”, IEEE/OSA Journal of Lightwave Technology, vol. 14, No. 2, 1996
215. E. Suhir, “Dynamic Response of a One-Degree-of-Freedom Linear System to a Shock Load during Drop Tests: Effect of Viscous Damping”, IEEE CPMT Transactions, Part A, vol. 19, No.3, 1996
216. E. Suhir, “Shock-Excited Vibrations of a Conservative Duffing Oscillator with Application to Shock Protection in Portable Electronics”, Int. J. Solids and Structures, vol. 33, No. 24, 1996
1995
217. E.Suhir,‘‘Global and Local Thermal Mismatch Stresses in an Elongated Bi-Material Assembly Adhesively Bonded at the Ends,’’ Symp. on Structural Analysis in Microelectronic and Fiber Optic Systems, ASME Winter Annual Meeting, EEP/12,1995
218. E. Suhir, “Analysis and Optimization of the Input/Output Fiber Configuration in a Laser Package Design”, ASME Journal of Electronic Packaging, vol. 117, No. 4, 1995
219. E. Suhir, “Shock Protection with a Nonlinear Spring”, IEEE CPMT Transactions, Advanced Packaging, Part B, vol. 18, No. 2, 1995
220. E. Suhir, “How Compliant Should a Die-Attachment Be to Protect the Chip From Substrate (Card) Bowing?”, ASME J. Electr. Packaging (JEP), vol. 117, No. 1, 1995
1994
221. E. Suhir, “Approximate Evaluation of the Elastic Thermal Stresses in a Thin Film Fabricated on a Very Thick Circular Substrate”, ASME J. Electr. Packaging (JEP), vol. 116, No. 3, 1994
222. E. Suhir E., “Dynamic Response of a Rectangular Plate to a Shock Load, with Application to Portable Electronic Product,” IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol.17, No. 3, 1994.
223. E. Suhir, “Approximate Evaluation of the Interfacial Shearing Stress in Circular Double Lap Shear Joints, with Application to Dual-Coated Optical Fibers”, Int. Journal of Solids and Structures, vol. 31, No. 23, 1994
224. E. Suhir, “Thermally Induced Stresses in an Optical Glass Fiber Soldered into a Ferrule”, IEEE/OSA Journal of Lightwave Technology, vol. 12, No. 10, 1994
225. E. Suhir, “Pull Testing of a Glass Fiber Soldered into a Ferrule: How Long Should the Test Specimen Be?”, Applied Optics, vol. 33, No. 19, 1994
226. E. Suhir and R. Burke, “Analysis and Optimization of the Dynamic Response of a Rectangular Plate to a Shock Load Acting on Its Support Contour, With Application to Portable Electronic Products”, IEEE CHMT Transactions, Advanced Packaging, Part B, vol. 17, No. 3, 1994
1993
227. E. Suhir, “Can the Curvature of an Optical Glass Fiber be Different from the Curvature of Its Coating?”, Int. J. Solids and Structures, vol. 30, No. 17, 1993
228. E. Suhir, “Predicted Stresses and Strains in Fused Biconical Taper Couplers Subjected to Tension”, Applied Optics, vol. 32, No. 18, 1993
229. E. Suhir, “Analytical Modeling of the Interfacial Shearing Stress in Dual-Coated Optical Fiber Specimens Subjected to Tension”, Applied Optics, vol. 32, No. 16, 1993
230. E. Suhir, “Effect of the Nonlinear Stress-Strain Relationship on the Maximum Stress in Silica Fibers Subjected to Two-Point Bending”, Applied Optics, vol. 32, No. 9, 1993
231. E. Suhir, “Analytical Modeling of the Interfacial Shearing Stress During Pull-Out Testing of Dual-Coated Lightguide Specimens”, Applied Optics, vol. 32, No. 7, 1993
232. E. Suhir, “Predicted Bow of Plastic Packages of Integrated Circuit (IC) Devices”, J. Reinforced Plastics and Composites, vol. 12, Sept. 1993
233. V. Mishkevich and E. Suhir, “Simplified Approach to the Evaluation of Thermally Induced Stresses in Bi-Material Structures”, in E. Suhir, ed., “Structural Analysis in Microelectronics and Fiber Optics”, ASME Press, 1993
234. E. Suhir, C. Paola, W. M. MacDonald, “Input/Output Fiber Configuration in a Laser Package Design”, IEEE/OSA J. Lightwave Technology, vol. 11, No. 12, 1993
1992
235. E. Suhir, “Free Vibrations of a Fused Biconical Taper Lightwave Coupler”, Int. J. Solids and Structures, vol. 29, No. 24, 1992
236. E. Suhir, “Vibration Frequency of a Fused Biconical Taper (FBT) Lightwave Coupler”, IEEE/OSA Journal of Lightwave Technology, vol. 10, No. 7, 1992
237. E. Suhir, “The Effect of the Nonlinear Behavior of the Material on Two-Point Bending in Optical Glass Fibers”, ASME J. Electr. Packaging (JEP), vol. 114, No. 2, 1992
238. E. Suhir, “Elastic Stability, Free Vibrations, and Bending of Optical Glass Fibers: The Effect of the Nonlinear Stress-Strain Relationship”, Applied Optics, vol. 31, No. 24, 1992
239. E. Suhir, “Response of a Flexible Printed Circuit Board to Periodic Shock Loads Applied to Its Support Contour”, ASME J. Appl. Mech, vol. 59, No. 2, 1992
240. E. Suhir, “Nonlinear Dynamic Response of a Flexible Thin Plate to Constant Acceleration Applied to Its Support Contour, with Application to Printed Circuit Boards Used in Avionic Packaging”, Int. J. Solids and Structures, vol. 29, No. 1, 1992
241. E. Suhir and L. T. Manzione, “Predicted Bow of Plastic Packages Due to the Non-uniform Through-Thickness Distribution of Temperature”, ASME J. Electr. Packaging (JEP), vol. 114, No. 3, 1992
1991
242. E. Suhir, “Approximate Evaluation of the Elastic Interfacial Stresses in Thin Films with Application to High-Tc Superconducting Ceramics”, Int. J. Solids and Structures, vol. 27, No. 8, 1991
243. E. Suhir, “Stress Relief in Solder Joints Due to the Application of a Flex Circuit”, ASME J. Electr. Packaging (JEP), vol. 113, No. 3, 1991
244. E. Suhir, G. M. Bubel, and R. D. Tuminaro, “Predicted Curvature of the Glass Fiber from the Measured Curvature of Its Coating”, IEEE/OSA Journal of Lightwave Technology, vol. 9, No. 6, 1991
245. E. Suhir and L. T. Manzione, “Predicted Stresses in Wire Bonds of Plastic Packages during Transfer Moldings”, ASME J. Electr. Packaging (JEP), vol. 113, No. 1, 1991
246. E. Suhir, “A Plate Contactor in a Mechanical Input/Output Connector Interface: How Small Can It Be?”, ASME J. Electr. Packaging (JEP), vol. 113, No. 1, 1991
247. E. Suhir and L. T. Manzione, “Mechanical Deformation of Lead Frame Assemblies in Plastic Packages during Molding”, ASME J. Electr. Packaging (JEP), vol. 113, No. 4, 1991
1990
248. E. Suhir, "Calculated Stresses in Dual-Coated Optical Fibers", Polymer Eng. & Sci., 30, 1990
249. E. Suhir, “Stresses in a Coated Fiber Stretched on a Capstan”, Applied Optics, vol. 29, No. 18, 1990
250. E. Suhir and J. M. Segelken, "Mechanical Behavior of Flip-Chip Encapsulants”, ASME J. Electr. Packaging (JEP), vol. 112, No. 4, 1990
251. E. Suhir, “Buffering Effect of Fiber Coating and Its Influence on the Proof-Test Load in Optical Fibers”, Applied Optics, vol. 29, No. 18, 1990
252. E. Suhir, “Mechanical Approach to the Evaluation of the Low Temperature Threshold of Added Transmission Losses in Single-Coated Optical Fibers”, IEEE/OSA J. Lightwave Techn., vol. 8, No. 6, 1990
253. E. Suhir, “Double-Sided Velcro-Type Input/Output Contactor Interface Design: Mechanical Behavior of Elastic Contactors”, ASME J. Electr. Packaging (JEP), vol. 112, No. 4, 1990
254. E. Suhir and B. Poborets, “Solder Glass Attachment in Cerdip/Cerquad Packages: Thermally Induced Stresses and Mechanical Reliability”, ASME J. Electr. Packaging (JEP), vol. 112, No. 2, 1990
255. E. Suhir, “How Long Should a Beam Specimen Be in Bending Tests?”, ASME J. Electr. Packaging (JEP), vol. 112, No. 1, 1990
256. E. Suhir, “Predicted Mechanical Behavior of High-Tc Superconducting Ceramic Films”, in T. Venkatesan, ed., “Processing of Films for High-Tc Superconducting Electronics”, SPIE, Vol. 1187, 1990
257. E. Suhir and T. M. Sullivan, “Analysis of Interfacial Thermal Stresses and Adhesive Strength of Bi-Annular Cylinders”, Int. J. Solids and Structures, vol. 26, No. 6, 1990
258. E. Suhir and W. E. Benedetto, “Mechanical Behavior of the “Euler” Test Probe”, ASME J. Electr. Packaging (JEP), vol. 112, No. 1,1990
1989
259. E. Suhir, “Interfacial Stresses in Bi-Metal Thermostats”, ASME J. Appl. Mech., vol. 56, No. 3, September 1989
260. E. Suhir, “Analytical Modeling in Structural Analysis for Electronic Packaging: Its Merits, Shortcomings and Interaction with Experimental and Numerical Techniques”, ASME J. Electr. Packaging (JEP), vol. 111, No. 2, June 1989
261. E. Suhir, “Axisymmetric Elastic Deformations of a Finite Circular Cylinder with Application to Low Temperature Strains and Stresses in Solder Joints”, ASME J. Appl. Mech., vol. 56, No. 2, 1989
262. E. Suhir, “Applications of an Epoxy Cap in a Flip-Chip Package Design”, ASME J. Electr. Packaging (JEP), vol. 111, No. 1, 1989
263. E. Suhir, “Bending Performance of Clamped Optical Fibers: Stresses Due to the End Off-Set”, Applied Optics, vol. 28, No. 3, February 1989.
264. E. Suhir, “Can Power Cycling Life of Solder Joint Interconnections Be Assessed on the Basis of Temperature Cycling Tests?”, ASME J. Electr. Packaging (JEP), vol. 111, No. 4, Dec. 1989.
265. E. Suhir, “Calculated Interfacial Stresses in Elongated Bi-Material Plates Subjected to Bending”, ASME J. Electr. Packaging (JEP), vol. 111, No. 4, Dec. 1989.
266. E. Suhir, “Twist-off Testing of Solder Joint Interconnections”, ASME J. Electr. Packaging (JEP), vol. 111, No. 3, Sept. 1989.
1988
267. E. Suhir, “Stresses in Dual - Coated Optical Fibers”, ASME J. Appl. Mech., vol. 55, No. 10, 1988.
268. E. Suhir, “Spring Constant In the Buckling of Dual-Coated Optical Fibers”, IEEE/OSA J. Lightwave Technology., vol. 6, No. 7, 1988.
269. E. Suhir, “Effect of Initial Curvature on Low Temperature Microbending in Optical Fibers”, IEEE/OSA J. Lightwave Techn., vol. 6, No. 8, 1988.
270. E. Suhir, “An Approximate Analysis of Stresses in Multilayer Elastic Thin Films”, ASME J. Appl. Mech., vol. 55, No. 3, 1988.
271. E. Suhir, “On a Paradoxical Phenomenon Related to Beams on Elastic Foundation”, ASME J. Appl. Mech., vol. 55, No. 10, 1988.
1987
272. E. Suhir, ‘‘Stresses in Multilayered Thin Films on a Thick Substrate, Heteroepitaxy-on-Silicon II,’’ MRS Symp.Proc, 91, 1987
1986
273. E. Suhir, “Stresses in Bi-Metal Thermostats”, ASME J. Appl. Mech., vol. 53, No. 3, Sept. 1986.
274. S. Luryi and E. Suhir, “A New Approach to the High-Quality Epitaxial Growth of Lattice - Mismatched Materials”, Applied Physics Letters, vol. 49, No. 3, July 1986.
1982
275. E. Suhir, “Shock-Excited Vibrations with Application to the Slamming Response of a Flexible Ship to a Regular Wave Packet”, SNAME J. Ship Research, vol. 26, No. 4, 1982.
Peer Reviewed Conference Presentations and Publications
2019
276. E. Suhir, S.Yi, J.Nicolics, “Failure-Oriented-Accelerated-Testing (FOAT) vs. Highly-Accelerated-Life-Testing (HALT): Making a Viable Medical Electron Device (MED) Package into a Reliable Product”, IMAPS Workshop on Advanced Packaging for Medical Microelectronics, San Diego, California, January 23-25, 2019
2018
277. E,Suhir, J.Hwang,R.Ghaffarian, “Elevated Stand-Off Heights in Solder Joint Interconnections of Surface Mounted IC Packages Result in Appreciable Stress and Warpage Relief”, IMAPS Conf., Pasadena, CA, 8-12 Oct., 2018
278. E.Suhir, “Reliability of an Electronic Product Fabricated of Mass-Produced Components”, IMAPS Conf., Pasadena, CA, 8-12 Oct., 2018
279. E. Suhir, “Probabilistic Design for Reliability (PDfR) of Aerospace Instrumentation: Role, Significance, Attributes, Challenges , 5th IEEE International Workshop on Metrology for Aerospace (MetroAeroSpace), Rome, Italy, Plenary Lecture, June 20-22, 2018
280. E. Suhir, S. Yi, “Accelerated Testing and Predicted Useful Lifetime of Medical Electronics”, Handlery Hotel, San-Diego, IMAPS Conf. on Advanced Packaging for Medical Electronics, Jan.23-24, 2017
2017
281. E. Suhir, S. Yi, “Elastic Stability of a Dual-Coated Fiber-Optic Connector”, 2017 SPIE Photonics West, Feb.1,San Francisco, published in the SPIE Digital Library as part of the proceedings of the Silicon Photonics XII conference.
282. E. Suhir, S. Yi, ”Thermal Stress in an Optical Silica Fiber Embedded (Soldered) into Silicon”, 2017 SPIE Photonics West, Jan. 31, San Francisco, published in the SPIE Digital Library as part of the proceedings of the Silicon Photonics XII conference.
283. E. Suhir, S. Yi, “Predicted Lattice-Misfit Stresses in a Gallium-Nitride (GaN) Film”, 2017 SPIE Photonics West, Jan.30, San Francisco, published in the SPIE Digital Library as part of the proceedings of the Silicon Photonics XII conference.
284. E. Suhir, S. Yi, J. Nicolics, L. Bechou, W.Benhadjala, “How Swiftly Should Be a Product Repaired, so that Its Availability is not Compromised?”, EuroSimE, 2017, Dresden, Germany, submitted
285. E.Suhir, S.Yi, “Double Exponential Probability Distribution Function (DEPDF) and Its Applications to Human-in-the-Loop (HITL) Aerospace Problems: When Human Performance Is Imperative, Ability to Quantify It is a Must”, Special NDA Session at the AIAA SciTech Conf., Jan. 9-13, 2017, Gaylord Texan Resort & Convention Center,
286. E.Suhir, S.Yi, “Design-for-Reliability and Accelerated Testing of Aerospace Electronics: What Should Be Done Differently”, Special NDA Session at the AIAA SciTech Conf., Jan. 9-13, 2017, Gaylord Texan Resort & Convention Center, submitted
287. E.Suhir, S.Yi, J.Nicolics, “Statistics- and Reliability Physics Related Failure Rates”, IRPS, Monterey, April 2-6, 2017, submitted
288. E.Suhir, S.Yi, J.Nicolics, “When Equipment Reliability and Human Performance Contribute Jointly to Vehicular Mission Success and Safety, Ability to Quantify Its Outcome is a Imperative”, IRPS, Monterey, April 2-6, 2017, submitted
2016
289. E. Suhir, S. Yi, “Predicted Thermal Stresses in a TSV Design”, San-Francisco, CA, Nov.8-10, 2016
290. E.Suhir, S.Yi, “Probabilistic Design for Reliability of Medical Electronic Devices: Role, Significance, Attributes, Challenges”, IEEE Medical Electronics Symp., Portland, OR, Sept. 14-15, 2016
291. E. Suhir, L. Bechou, R. Ghaffarian, J. Nicolics, “Column-Grid-Array (CGA) Technology Could Lead to a Highly Reliable Package Design”, IEEE Aerospace Conference, Big Sky, Montana, March 5-12, 2016
292. E.Suhir, J.Nicolics, and S. Yi, "Probabilistic Predictive Modeling (PPM) of Aerospace Electronics (AE) Reliability: Prognostic-and-Health-Monitoring (PHM) Effort Using Bayes Formula (BF), Boltzmann-Arrhenius-Zhurkov (BAZ) Equation and Beta-Distribution (BD)", 2016 EuroSimE Conf., Montpelier, France, 2016
293. E. Suhir, M. Unger, L. Cvitkovich, and J. Nicolics, “Power Core Embedding a Plurality of IC Devices and Sandwiched Between Two Insulated Metal Substrates: Predicted Thermal Stresses”, 2016 EuroSimE Conf., Montpelier, France, 2016
294. E.Suhir, J.Nicolics, “Aerospace Electronics-and-Photonics (AEP) Reliability Has to be Quantified to be Assured”, AIAA SciTech Conf., San Diego, CA, January 2016
2015
295. E. Suhir, A. Bensoussan, J. Nicolics, “Bow-Free Pre-Stressed ALT Specimen”, SAE Conf., Seattle, WA, Sept. 22-24, 2015
296. E. Suhir, "Analytical Modeling Enables One to Explain Paradoxical Situations in the Behavior and Performance of Electronic Materials and Products" (keynote presentation), Int. Conf. on Materials, Processing and Products Engineering (MPPE), Leoben, Austria, Nov. 3-5, 2015
297. E. Suhir, G. Khatibi, J. Nicolics, M. Lederer, "Semiconductor Film Grown on a Circular Substrate: Predictive Modeling of the Lattice-Misfit Stresses”, Ibid.
298. A. Bensoussanm E. Suhir, P. Henderson, M. Zahir, “A Unified Multiple Stress Reliability Model for Microelectronic Devices: Application to 1.55 DFB Laser Diode Module for Space Validation”, ESREF, Toulouse, France, Oct. 2015
299. E. Suhir, A. Bensoussan, “Degradation Related Failure Rate Determined from the Experimental Bathtub Curve”, SAE Conf., Seattle, WA, Sept. 22-24,.2015
300. E. Suhir, “Human-in-the-Loop and Aerospace Navigation Success and Safety: Application of Probabilistic Predictive Modeling”, SAE Conf., Seattle, WA, Sept. 22-24, .2015
301. E. Suhir, “Failure Oriented Accelerated Testing (FOAT), and Its Role in Making a Viable VLSI Device into a Reliable Product, 2015 IEEE VLSI Test Symp. Silverado Resort and Spa, Napa, CA, April 27-29, 2015
302. E. Suhir, A. Bensoussan, G. Khatibi, J. Nicolics, “Probabilistic Design for Reliability in Electronics and Photonics: Role, Significance, Attributes, Challenges”, IRPS, Hyatt Regency Monterey Resort & Spa, Monterey, CA, USA, April 19-23, 2015
303. E. Suhir, “Analytical Stress Modeling for TSVs in 3D Packaging”, Semi-Term, San-Jose, March 15-19, 2015
304. E. Suhir, L. Bechou, “Thermal Stress in an Electronic Package Sandwiched Between Two Identical Substrates”, IEEE Aerospace Conference, Big Sky, Montana, March 5-12, 2015E
305. E. Suhir, “Assessment of Product’s Degradation Rate from the Measured Bathtub Curve Data”, 2015 IEEE Aerospace Conference, Big Sky, Montana, March 5-12, 2015
306. E. Suhir, “Analytical Predictive Modeling in Fiber Optics Structural Analysis: Review and Extension”, SPIE, San-Francisco, February 10, 2015
307. E. Suhir, “Stress Related Aspects of the Physics of GaN Material Growth”, SPIE, San-Francisco, February 10, 2015
2014
308. E.Suhir,” Reliability Physics and Probabilistic Design for Reliability (PDfR): Role, Attributes, Challenges” EPTC 2014, Singapore, November 5th, 2014 (invited)
309. G. Khatibi, B.Czerny, J.Magnien, M.Lederer, E.Suhir, J. Nicolics, “Towards Adequate Qualification Testing of Electronic Products: Review and Extension”, EPTC 2014, Singapore, November 5th, 2014 (invited)
310. E. Suhir, A. Bensoussan, “Quantified Reliability of Aerospace Optoelectronics”, SAE Aerospace Systems and Technology Conference, September 23-25 2014 — Cincinnati, OH, USA
311. Z. Remili, Y. Ousten, B. Levrier, D. Mercier, E. Suhir, L. Bechou, “Thermo-mechanical Stress Analysis of Copper/Silicon Interface in Through Silicon Vias using FEM simulations and experimental analysis”, IEEE CPMT ESTC Conference, Helsinki, 2014
312. V. Murashev, S. Legotin, K. Tapero, E.Suhir, “Asynchronous Scanning Photo-receiver Based on Injection-Coupled Device”, 2014 ISROS Conference, June 2014
313. J.-M. Salotti, R. Hedmann, E.Suhir, “ Crew Size Impact on the Design, Risks and Cost of a Human Mission to Mars”, 2014 IEEE Aerospace Conference, Big Sky, Montana, March 2014
314. E.Suhir, A. Bensoussan, L. Bechou, “Aerospace Electronic Packaging: Thermal Stress in Bi- and Tri-Material Assemblies”, 2014 IEEE Aerospace Conference, Big Sky, Montana, March 2014
315. E.Suhir, A.Bensoussan, “Application of Multi-parametric BAZ Model in Aerospace Optoelectronics”, 2014 IEEE Aerospace Conference, Big Sky, Montana, March 2014
316. E. Suhir, A.Bensoussan, J.Nicolics, L.Bechou, “Highly Accelerated Life Testing (HALT), Failure Oriented Accelerated Testing (FOAT), and Their Role in Making a Viable Device into a Reliable Product”, 2014 IEEE Aerospace Conference, Big Sky, Montana, March 2014
317. J.-M. Salotti, E. Suhir, “Some Major Guiding Principles for Making Future Manned Missions to Mars Safe and Reliable”, 2014 IEEE Aerospace Conference, Big Sky, Montana, March 2014
318. V. N. Murashev, P.A. Ivshin, S.A.Legotin, K. Tapero, E. Suhir, “Injection-coupled Devices (ICDs): Operation Principle, Applications, Design-for-Reliability”, 2014 IEEE Aerospace Conference, Big Sky, Montana, March 2014
319. D. Gucik-Derigny, A. Zolghadri. L. Bechou, E. Suhir, “Prediction of Remaining Useful Life (RUL) of Ball-Grid-Array (BGA) Interconnections During Testing on the Board Level”, 2014 IEEE Aerospace Conference, Big Sky, Montana, March 2014
320. E. Suhir, “Failure-Oriented-Accelerated-Testing (FOAT) and Its Role in Making a Viable Package into a Reliable Product”, SEMI-TERM 2014, San Jose, CA, March 9-13, 2014
321. D. Gucik-Derigny, A. Zolghadri, E. Suhir, L. Bechou, "A Model-Based Prognosis Strategy for Prediction of Remaining Useful Life of Ball-Grid-Array Interconnections", 19th World Congress of the International Federation of Automatic Control, Cape Town, South Africa, August 24-29, 2014
2013
322. E. Suhir, L. Bechou, “Saint-Venant’s Principle and the Minimum Length of a Dual-Coated Optical Fiber Specimen in Reliability (Proof) Testing”, ESREF, Arcachon, France, 2013
323. E. Suhir, L. Bechou, A.Bensoussan, J. Nicolics “Photovoltaic Reliability Engineering: Qualification Testing (QT) and Probabilistic Design-for-Reliability (PDfR) Concept”, invited presentation, 2013 SPIE PV Reliability Conference, San Diego CA, August 2013
324. W. Benhadjala, I. Bord-Majek, L. Béchou, E. Suhir, M. Buet, F. Rougé, V. Gaud. and Y. Ousten, “Effect of Processing Factors on Dielectric Properties of BaTiO3/Hyperbranched Polyester Core-Shell Nano-Particles”, ECTC, San Diego, May 2013
325. A. Bensoussan and E. Suhir, “Design-for-Reliability (DfR) of Aerospace Electronics: Attributes and Challenges", 2013 IEEE Aerospace Conference, Big Sky, Montana, March 2013
326. E. Suhir, “Assuring Aerospace Electronics and Photonics Reliability: What Could and Should Be Done Differently”, 2013 IEEE Aerospace Conference, Big Sky, Montana, March 2013
327. E. Suhir, “Predicted Reliability of Aerospace Electronics: Application of Two Advanced Probabilistic Techniques”, 2013 IEEE Aerospace Conference, Big Sky, Montana, March 2013
328. E. Suhir, L .Bechou, B. Levrier, D. Calvez, “Assessment of the Size of the Inelastic Zone in a BGA Assembly”, 2013 IEEE Aerospace Conference, Big Sky, Montana, March 2013
329. E. Suhir, “Elastic Stability of a Dual-Coated Fiber”, SPIE Paper #8621-37, Photonics West, February 2013
2012
330. E.Suhir, “Thermal Stress in Electronics and Photonics: Prediction and Prevention”, Keynote presentation, Therminic, Budapest, September 2012
331. E.Suhir, “Dynamic Response of Electronic Systems to Shocks and Vibrations: Application of Analytical (Mathematical) Modeling”, 2012 DYMAT Conference
332. E. Suhir, R. Mahajan, A. Lucero, L. Bechou, “Probabilistic Design for Reliability (PDfR) and a Novel Approach to Qualification Testing (QT)”, 2012 IEEE/AIAA Aerospace Conf., Big Sky, Montana, 2012
333. B. Nagl, E.Suhir, W. Gschohsmann, J.Nicolics, “Transient Thermo-Mechanical Study of a Thick-Wire Bond with Particular Attention to the Interfacial Shearing Stress”, Int. Spring Seminar on Electronics Technology (ISSE), 09-13, Bad Aussee, Austria, May 2012
334. W. Benhadjala, I. Bord, L. Béchou, E. Suhir, M. Buet, F. Rougé, Y. Ousten, “Novel Core-Shell Nanocomposite for RF Embedded Capacitors: Processing and Characterization”, 2012 ECTC , June 2012
2011
335. E.Suhir, "Human-in-the-Loop”: Likelihood of a Vehicular Mission-Success-and-Safety, and the Role of the Human Factor”, Paper ID 1168, 2011 IEEE/AIAA Aerospace Conference, Big Sky, Montana, March 5-12, 2011
2009
336. E. Suhir, “Stretchable Electronics: Does One Need a Good Thermal Expansion Match Between the Si Die and the Plastic Carrier?” , IEEE ECTC 2009
337. T. Reinikainen and E.Suhir, “Novel Shear Test Methodology for the Most Accurate Assessment of Solder Material Properties”, IEEE ECTC 2009
338. E. Suhir, “Lateral Compliance and Elastic Stability of a Dual-Coated Optical Fiber of Finite Length, with Application to Nano-Rods Embedded in Low-Modulus Elastic Media”, IEEE ECTC 2009
339. E.Suhir, “Helicopter-Landing-Ship: Undercarriage Strength and the Role of the Human Factor”, ASME OMAE Conference, June 1-9, Honolulu, Hawaii, 2009;
2008
340. E. Suhir and S. Savastiuk, “Disc-like Copper Vias Fabricated in a Silicon Wafer: Design for Reliability”, 58-th IEEE ECTC 2008
2007
341. E. Suhir, “Dynamic Response of Micro-Electronic Structural Elements to Shocks and Vibrations”, Keynote presentation, MicroNanoReliability Congress, Berlin-Koepenick, September 2-5, 2007
342. E. Suhir, “Polymer Coating of Optical Silica Fibers, and a Nanomaterial-Based Coating System”, Keynote Presentation, Polytronic’2007, Proceedings of the International Conference on Polymeric Materials for Micro- and Opto-Electronics Applications, Tokyo, Japan, January 14-16, 2007
2006
343. Yi. Zhang, Yuan Xu, Claire Gu and Ephraim Suhir, “Predicted Shear-off Stress in Bonded Assemblies: Review and Extension” ASTR 2006, San Francisco, CA, 2006
344. E. Suhir, “Fiber Optics Structural Mechanics, and a New Generation of Nano-Technology Based Optical Fiber Cladding and Coating”, Invited talk at the Photonics West Conf., and SPIE Publication, 2006
345. E. Suhir, D. Ingman, “Highly Compliant Bonding Material and Structure for Micro- and Opto-Electronic Applications”, ECTC’06 Proceedings, San Diego, May 2006
2005
346. E. Suhir, “Analytical Thermal Stress Modeling in Physical Design for Reliability of Micro- and Opto-Electronic Systems: Role, Attributes, Challenges, Results”, Invited Talk, Therminic, 2005, Lago Maggiore, Italy, September 27-30, 2005
347. E. Suhir, “Mechanics of Coated Optical Fibers: Review and Extension”, ECTC’2005, Orlando, Florida, 2005
348. E. Suhir, “Microelectronic and Photonic Systems: Role of Structural Analysis”, InterPack’2005 Conference, San Francisco, July 2005
349. E. Suhir, “New Nano-Particle Material (NPM) for Micro- and Opto-Electronic Packaging Applications”, IEEE Workshop on Advanced Packaging Materials, Irvine, March 2005.
2004
350. E. Suhir, “Bow-Free Assemblies: Predicted Stresses”, Therminic’2004, Niece, France, Sept. 29-Oct.1, 2004
351. E. Suhir, “Polymer Coated Optical Glass Fiber Reliability: Could Nano-Technology Make a Difference?”, Polytronic’04, Portland, OR, September 13-15, 2004
2003
352. E. Suhir, “Thermal Stress Modeling in Micro- and Opto-Electronics: Review and Extension”, Invited Presentation, ASME Symposium Dedicated to Dr. Richard Chu, IBM, Washington, DC, November 2003
353. E. Suhir, “Polymer Coated Optical Glass Fibers: Review and Extension”, Proceedings of the POLYTRONIK’2003, Montreaux, October 21-24, 2003.
354. E. Suhir, V.Ogenko, D. Ingman, “Two-Point Bending of Coated Optical Fibers”, Proceedings of the PhoMat’2003 Conference, San-Francisco, CA, August 2003
355. E. Suhir, “How to Make a Photonic Device Into a Product: Role of Accelerated Life Testing”, Keynote Address at the International Conference of Business Aspects of Microelectronic Industry, Hong-Kong, January 2003.
2002
356. E.Suhir, “Could Shock Tests Adequately Mimic Drop Test Conditions?”, IEEE ECTC Conference Proceedings, San-Diego, CA, May 28-31, 2002
2001
357. E. Suhir, “Adequate Underkeel Clearance (UKC) for a Ship Passing a Shallow Waterway: Application of the Extreme Value Distribution (EVD)”, Proceedings of OMAE2001 Conference, Paper OMAE2001/S&R-2113, Rio de Janeiro, Brazil, 2001
2000
358. A. Katz, M. Pecht, E. Suhir, “Accelerated Testing in Microelectronics: Review, Pitfalls and New Developments”, Proceedings of the International Symposium on Microelectronics and Packaging, IMAPS, Israel, 2000
359. E.Suhir, “The Future of Microelectronics and Photonics, and the Role of Mechanical, Materials and Reliability Engineering”, Proceedings of the International Conference on Materials in Microelectronics, MicroMat 2000, April 17-19, 2000, Berlin, Germany
360. E.Suhir, “Silica Optical Fiber Interconnects: Design for Reliability”, Proceedings of the Annual Conference of the American Ceramic Society, St.-Louis, MO, May 3, 2000
1999
361. E.Suhir, “Elastic Stability of the Glass Fibers in a Micromachined Fiber-Optic Switch Packaged into a Dual-in-Line Ceramic Package”, ECTC, 1999
1998
362. E. Suhir, “Coated Optical Fiber Interconnect Subjected to the Ends Off-Set and Axial Loading”, International Workshop on Reliability of Polymeric Materials and Plastic Packages of IC Devices, Paris, Nov. 29- Dec.2, 1998, ASME Press, 1998.
363. E. Suhir, “Critical Strain and Postbuckling Stress in Polymer Coated Optical Fiber Interconnect: What Could Be Gained by Using Thicker Coating?”, International Workshop on Reliability of Polymeric Materials and Plastic Packages of IC Devices, Paris, Nov. 29- Dec.2, 1998, ASME Press, 1998.
364. E. Suhir, “Bending Stress in an Optical Fiber Interconnect Experiencing Significant Ends Off-Set”, MRS Symp. Proc., vol. 531, 1998.
365. E. Suhir, “Optical Fiber Interconnect Subjected to a Not-Very-Small Ends Off-Set: Effect of the Reactive Tension”, MRS Symposia Proceedings, vol. 531, 1998.
366. E. Suhir, “’Optical Glass Fiber Bent on a Cylindrical Surface”, MRS Symposia Proceedings, vol.531, 1998.
1997
367. E. Suhir, “Dynamic Response of Microelectronics and Photonics Systems to Shocks and Vibrations”, Proceedings of the International Conference on Microelectronics and Photonics Packaging, INTERPack’97, Hawaii, June 15-19, 1997.
368. E. Suhir, “Effect of Plastic Package Geometry on Its Propensity to Moisture Induced Failure”, IMAPS/NATO Workshop Proceedings, Bled, Slovenia, 1997
369. E. Suhir, “The Future of Microelectronics and Photonics and the Role of Mechanics and Materials”, Proceedings of the Electronic Packaging and Technology Conf., EPTC’97, Singapore, October 1997.
370. E. Suhir, "Bending of a Partially Coated Glass Fiber Subjected to the Ends Off-Set", Proc. of the 47-th Electr. Comp. and Techn. Conference, IEEE, San Jose, CA, May 1997, see also IEEE CPMT Transactions, June 1997.
371. E. Suhir, “Solder Materials and Joints in Fiber Optics: Reliability Requirements and Predicted Stresses”, Proc. of the Int. Symp. on “Design and Reliability of Solders and Solder Interconnections”, Orlando, Fl., Febr. 1997.
372. M. Uschitsky and E. Suhir, “Moisture Diffusion in Epoxy Molding Compounds Filled With Silica Particles”, in E. Suhir, ed., “Structural Analysis in Microelectronics and Fiber Optics”, ASME Press, 1997.
1996
373. B. Welker, M. Uschitsky, E. Suhir, S. Kher, G. Bubel, “Finite Element Analysis of the Optical Fiber Structures”, in E. Suhir, ed., “Structural Analysis in Microelectronics and Fiber Optics”, Symposium Proceedings, ASME Press, 1996
374. E. Suhir, “Flex Circuit vs Regular” Substrate: Predicted Reduction in the Shearing Stress in Solder Joints”, Proc. of the 3-rd Int. Conf. on Flexible Circuits FLEXCON 96, San-Jose, CA, Oct. 1996.
375. M. Uschitsky, E. Suhir, L. Shepherd, W.R. Lambert, and M.A. Zimmerman, “Predicted Dynamic Strength and Durability of a Network Interface Unit (NIU) Enclosure”, in E. Suhir, ed., Structural Analysis in Microelectronics and Fiber Optics”, Symposium Proceedings, ASME Press, 1996.
376. E. Suhir, and Q.S.M. Ilyas, ““Thick” Plastic Packages With “Small” Chips vs “Thin” Packages With “Large” Chips: How Different is Their Propensity to Moisture Induced Failures?”, in E. Suhir, ed., “Structural Analysis in Micro-electronics and Fiber Optics”, Symposium Proceedings, ASME Press, 1996.
377. M. Uschitsky, E. Suhir, “Predicted Thermally Induced Stresses in an Epoxy Molding Compound at the Chip Corner”, in E. Suhir, ed., “Structural Analysis in Microelectronics and Fiber Optics”, Symposium Proceedings, ASME Press, 1996.
1995
378. M. Uschitsky, E. Suhir, S. Kher, and G. Bubel, “Epoxy Bonded Optical Fibers: the Effect of Voids on Stress Concentration in the Epoxy Material”, in E. Suhir, ed., “Structural Analysis in Microelectronic and Fiber Optic Systems”, Symposium Proceedings, ASME Press, 1995.
379. E. Suhir, “Predicted Failure Criterion (von-Mises Stress) in Plastic Packages During High Temperature Reflow Soldering”, 45-th ECTC Proceedings, Las Vegas, May 1995.
380. E. Suhir, V. Mishkevich, and J. Anderson, “How Large Should a Periodic External Load Be to Cause Appreciable Microbending Losses in a Dual-Coated Optical Fiber?”, in E. Suhir, ed., “Structural Analysis in Microelectronics and Fiber Optics”, Symposium Proceedings, ASME Press, 1995.
381. E. Suhir, “Global” and “Local” Thermal Mismatch Stresses in an Elongated Bi-Material Assembly Bonded at the Ends”, in E. Suhir, ed., “Structural Analysis in Microelectronic and Fiber-Optic Systems”, Symposium Proceedings, ASME Press, 1995.
1993
382. E. Suhir, “Mechanical Reliability of Flip-Chip Interconnections in Silicon-on-Silicon Multichip Modules”, IEEE Conference on Multichip Modules, IEEE, Santa Cruz, Calif., March 1993.
383. E. Suhir, “Predicted Interfacial Shearing Stress in Dual-Coated Optical Fiber Specimens Subjected to Tension”, Part 2, “The Case of a Specimen Embedded into Epoxy”, ANTEC-93, May 1993, SPE, New Orleans, Louisiana.
384. E. Suhir, “Predicted Interfacial Shearing Stress in Dual-Coated Optical Fiber Specimens Subjected to Tension”, Part 1, “The Case of a Cylindrical Double Lap Shear Joint”, ANTEC-93, May 1993, SPE, New Orleans, Louisiana.
1992
385. E. Suhir and T. M. Sullivan, “Novel Technique for the Evaluation of the Adhesive Strength of the Epoxy Molding Compounds Used in Plastic Packaging”, 42-nd Electr. Comp. and Techn. Conf., IEEE, San-Diego, Calif., May 1992.
386. E. Suhir, “Mechanical Behavior and Reliability of Solder Joint Interconnections in Thermally Matched Assemblies”, 42-nd Electr. Comp. and Techn. Conf., IEEE, San-Diego, Calif., May 1992.
387. E. Suhir, “Predicted Bow of Plastic Packages of Integrated Circuit (IC) Devices”, 50-th SPE Conf., SPE, Detroit, MI, May 1992.
1991
388. E. Suhir, “Nonlinear Dynamic Response of a Flexible Printed Circuit Board to Shock Loads Applied to Its Support Contour”, 41-st Elect. Comp. and Techn. Conf., IEEE, Atlanta, Georgia, May 1991.
389. E. Suhir, “Mechanical Behavior of Materials in Microelectronic and Fiber Optic Systems: Application of Analytical Modeling-Review”, MRS Symposia Proc., vol. 226, 1991.
1990
390. E. Suhir and B. Poborets, “Solder Glass Attachment in Cerdip/Cerquad Packages: Thermally Induced Stresses and Mechanical Reliability”, 40th Elect. Comp. and Techn. Conf., Las Vegas, Nevada, May 1990;
1989
391. E. Suhir, “Calculated Stresses in Microelectronic and Fiber-Optic Structures”, Proc. of the 1st Pan American Congress of Applied Mechanics, American Academy of Mechanics, Rio de Janeiro, Brazil, January 1989.
392. E. Suhir, “Mechanical Behavior of Materials in Microelectronic and Fiber-Optic Systems: Application of Analytical Modeling-Review”, ASME 89-WA/EEP-16, 1989 Winter Annual Meeting, San-Francisco, December 1989.
393. E. Suhir, “Thermally Induced Stresses in Elongated Bi-Material Plates”, Applied Mechanics Reviews, 1989 Supplement, “Mechanics Pan America 1989, Selected and Revised Proceedings of the January 1989 Rio de Janeiro Pan American Congress of Applied Mechanics, C. R. Steele, A. W. Leissa and M. R. M. Crespo de Silva, eds., vol. 42, No. 11, part 2, Nov. 1989.
1988
394. E. Suhir and J. M. Segelken, "Mechanical Behavior of Flip-Chip Encapsulants”, Semicon/East Technical Proc., Semiconductor Equipment and Materials International, Boston, Mass., Sept. 1988.
395. E. Suhir, “Could Compliant External Leads Reduce the Strength of a Surface Mounted Device?”, Proc. of the 38th Electr. Comp. Conf., IEEE, Los Angeles, Calif., May 1988.
396. E. Suhir, “Calculated Stresses in Dual-Coated Fibers”, Proc. of the SPE 46th Annual Technical Conference, ANTEC '88, Atlanta, Georgia, May 1988.
1987
397. E. Suhir, “Die Attachment Design and Its Influence on the Thermally Induced Stresses in the Die and the Attachment”, Proc. of the 37th Elect. Comp. Conf., IEEE, Boston, Mass., May 1987.
398. E. Suhir and W. E. Benedetto, “Mechanical Behavior of the “Euler” Test Probe”, Preprint ASME 87-WA/EEP-5, 1987 Winter Annual Meeting, Boston, Mass., Dec. 1987.
1986
399. E. Suhir, “Calculated Thermally Induced Stresses in Adhesively Bonded and Soldered Assemblies”, Proc. of the Int. Symp. on Microelectronics, ISHM, 1986, Atlanta, Georgia, Oct. 1986.
400. E. Suhir, “Stresses in Adhesively Bonded Bi-material Assemblies used in Electronic Packaging,” Proceedings of the Electronic Packaging Materials Science Symposium II, Palo Alto, California, April 15-18, pp.133-138, 1986.
1985
401. E. Suhir, “Linear and Nonlinear Vibrations Caused by Periodic Impulses”, AIAA/ASME/ASCE/AHS 26th Structures, Structural Dynamics and Materials Conference, Orlando, Florida, April 1985.
Articles in Trade Magazines
402. E. Suhir, “Relieving Stress in Flip-Chip Solder Joints”, Chip Scale Reviews, v.21, No.5, September-October, 2017
403. E.Suhir, “Avoiding Low-Cycle Fatigue in Solder Material Using Inhomogeneous Column-Grid-Array (CGA) Design”, ChipScale Reviews, March-April 2016
404. E. Suhir, “Electronics Reliability Cannot Be Assured, if it is not Quantified”, Chip Scale Reviews, March-April, 2014
405. E.Suhir, “Failure-Oriented-Accelerated-Testing (FOAT) and Its Role in Making a Viable IC Package into a Reliable Product”, Circuits Assembly, July 2013
406. E. Suhir, L. Bechou, “Availability Index and Minimized Reliability Cost”, Circuit Assemblies, February 2013
407. E. Suhir, L. Bechou, A.Bensoussan, “Technical Diagnostics in Electronics: Application of Bayes Formula and Boltzmann-Arrhenius-Zhurkov Model”, Circuit Assembly, December 3, 2012
408. E. Suhir, “Electronic Product Qual Specs Should Consider Its Most Likely Application(s)”, Chip Scale Reviews, November 2012
409. E.Suhir, “Predictive Modeling is a Powerful Means to Prevent Thermal Stress Failures in Electronics and Photonics”, Chip Scale Reviews, vol.15, No.4, July-August 2011
410. E. Suhir, R. Mahajan, “Are Current Qualification Practices Adequate?“, Circuit Assembly, April 2011
411. E. Suhir, “Probabilistic Design for Reliability”, Chip Scale Reviews, vol.14, No.6, 2010
412. E. Suhir, “Reliability and Accelerated Life Testing”, Semiconductor International, February 1, 2005.
413. E.Suhir, “Inventive Leadership: Could a Good Engineer Become a Good Entrepreneur?”, ASME Mechanical Engineering, November 2005
414. E. Suhir, “Crossing the Lines, or Should We Just Mind Our Own Business?”, Feature Article, ASME Mech. Engineering, 2004
415. E.Suhir, “Analytical Stress-Strain Modeling in Photonics Engineering: Its Role, Attributes and Interaction with the Finite-Element Method”, Laser Focus World, May 2002.
416. E. Suhir, “Thermo-Mechanical Stress Modeling in Microelectronics and Photonics”, Electronics Cooling, vol.7, No.4, 2001
417. E. Suhir, “Thermal Stress Failures in Microelectronics and Photonics: Prediction and Prevention”, Future Circuits International, issue 5, 1999

Amjad Anvari-Moghaddam, PhD, P.Eng, SMIEEE

R&D Project Manager and Postdoctoral FellowDepartment of Energy TechnologyAalborg University9220 Aalborg East, Denmark
Amjad Anvari-Moghaddam received the Ph.D. degree (Hon.) from the University of Tehran in 2015 in Power Systems Engineering. Currently, he is an R&D Project Manager and a Postdoctoral Fellow at the Department of Energy Technology, Aalborg University. His research interests include planning, design, control and operation of energy systems, mostly renewable and hybrid power systems with appropriate market mechanisms. Dr. Anvari-Moghaddam is the GE/Associate Editor of the IEEE ACCESS, IET RENEWABLE POWER GENERATION, IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS special issue: “Next Generation Intelligent Maritime Grids”, the journal of APPLIED SCIENCES special issues: “Advances in Integrated Energy Systems Design, Control and Optimization” and “Sustainable Energy Systems Planning, Integration and Management”, the Journal of FUTURE GENERATION COMPUTER SYSTEMS special issue: “Smart Data for Internet of Things” and the Editorial Board Member for Energies(OA Journal), The Open Electrical & Electronic Engineering Journal and SCIREA Journal of Electrical Engineering. He is also a member of the Technical Committee (TC) of IEEE IES Renewable Energy Systems; TC Member of IES Resilience and Security for Industrial Applications-ReSia; TC member of IEEE Working Group P2004 (HIL Simulation-Based Testing of Electric Power Apparatus and Controls); and TC member of CIGRE Working Groups on Rural Electrification (TOR C6.38) and Distributed Energy Resources Aggregation Platforms for the Provision of Flexibility Services (TOR C6.35). Dr. Anvari-Moghaddam also serves as the Secretary of the IEEE Working Group on Smart Buildings, Loads and Customer Systems and the Member of Technical Program/Advisory Committee for several international conferences. Dr. Anvari-Moghaddam is also the recipient of the 2018 IEEE Outstanding Leadership Award (Halifax, Nova Scotia, Canada) and the 2017 IEEE Outstanding Service Award (Exeter-UK).
Power system modeling, operation, and control
Renewable/hybrid energy systems and sustainable development
Energy management systems design and supervisory control
AC/DC Microgrids and active distribution networks
Operations research and its applications to energy systems:
· Mathematical modeling
· Linear and non-linear optimization
· Risk/uncertainty modeling and management
· Sensitivity analysis
· System identification
Dr. Anvari-Moghaddam is also the recipient of the 2018 IEEE Outstanding Leadership Award (Halifax, Nova Scotia, Canada) and the 2017 IEEE Outstanding Service Award (Exeter-UK).
Publications :
Book Chapters:
B1. A. Anvari-Moghaddam, J. Dulout, C. Alonso, B. Jammes, J.M. Guerrero, “Optimal Design and Operation Management of Battery-Based Energy Storage Systems (BESS) in Microgrids”, Advancements in Energy Storage Technologies, Prof. W. Cao and X.P. Chen (Ed.), IntechOpen, 2018. ISBN: 978-953-51-5713-7.
B2. T. Dragicevic, A. Anvari-Moghaddam, J.C. Vasquez, J.M. Guerrero. “DC Distribution Systems and Microgrids”, Large Scale Grid Integration of Renewable Energy Sources, Prof. Antonio Moreno-Munoz (Ed.), IET, 2017. ISBN: 978-1-78561-162-9.
B3. A. Anvari-Moghaddam, T. Dragicevic, Marko Delimar, “Energy Management Systems for DC Microgrids”, DC Distribution Systems and Microgrids, Prof. T. Dragicevic, Prof. P. Wheeler and Prof. F. Blaabjerg (Eds), IET, 2018, ISBN: 978-1-78561-382-1.
B4. A. Anvari Moghaddam, G. Mokhtari, J.M. Guerrero. “Coordinated Demand Response and Distributed Generation Management in Residential Smart Microgrids”, Energy Management of Distributed Generation Systems, Dr. Eng. Lucian Mihet (Ed.), InTech, 2016. ISBN: 978-953-51-4708-4.
B5. G. Mokhtari, A. Anvari Moghaddam, G. Nourbakhsh. “Distributed Control and Management of Renewable Electric Energy Resources for Future Grid Requirements”, Energy Management of Distributed Generation Systems, Dr. Eng. Lucian Mihet (Ed.), InTech, 2016. ISBN: 978-953-51-4708-4.
B6. A. Anvari Moghaddam. “Global Warming Mitigation Using Smart Micro-Grids”, Global Warming - Impacts and Future Perspective, Prof. Dr. Bharat Raj Singh (Ed.), ISBN: 978-953-51-0755-2, InTech, 2012. DOI: 10.5772/48204.

Journal Papers:
J1. N. Bazmohammadi, A.R. Tahsiri, A. Anvari-Moghaddam, J.M. Guerrero, “A Hierarchical Energy Management Strategy for Interconnected Microgrids Considering Uncertainty”, Int. J. Elec. Power & Energy Syst., vol 109, pp. 597-608, 2019.
J2. G. Mokhtari, A. Anvari-Moghaddam, Q. Zhang, “A New Layered Architecture for Future Big Data-driven Smart Homes”, IEEE Access, vol.7, no.1, pp.19002-19012, 2019. DOI 10.1109/ACCESS.2019.2896403.
J3. S.E. Jaouhari, E.J.Palacios-Garcia, A. Anvari-Moghaddam, A. Bouabdallah, “Integrated Management of Energy, Wellbeing and Health in the Next Generation of Smart Homes”, Sensors, vol.19, no.481, pp.1-24, 2019.
J4. J.Yue, Z. Hu, A. Anvari-Moghaddam, J.M. Guerrero, “A Market-driven Energy Scheduling of Smart Microgrids in Distribution Networks”, Sustainability, vol. 11, no.2, 301, 2019.https://doi.org/10.3390/su11020301.
J5. M. Majidi, B. Mohammadi-Ivatloo, A. Anvari-Moghaddam, “Optimal Robust Operation of Combined Heat and Power Systems with Demand Response Programs”, Appl. Thermal Eng., vol.149, pp.1359-1369, 2019.
J6. M. Mohiti, H. Monsef, A. Anvari-Moghaddam, J.M. Guerrero, H. Lesani, “A Decentralized Robust Model for Optimal Operation of Distribution Companies with Private Microgrids”, Int. J. Elec. Power & Energy Syst., vol. 106, pp. 105-123, 2019.
J7. S. Esmaeili, A. Anvari-Moghaddam, S. Jadid, J.M. Guerrero, “Optimal Simultaneous Day-Ahead Scheduling and Hourly Reconfiguration of Distribution Systems Considering Responsive Loads”, Int. J. Elec. Power & Energy Syst., vol. 104, pp. 537-548, 2019.
J8. B. Shakerighadi, A. Anvari-Moghaddam, E. Ebrahimzadeh, F. Blaabjerg, C. Leth Bak, “A Hierarchical Game Theoretical Approach for Energy Management of Electric Vehicles and Charging Stations in Smart Grids”, IEEE Access, vol.6, no.1, pp. 1-12, 2018.
J9. H. Rashidizaheh-Kermani, M. Vahedipour-Dahraie, A. Anvari-Moghaddam, J.M. Guerrero, “Stochastic Risk-Constrained Decision-Making Approach for a Retailer in a Competitive Environment with Flexible Demand Side Resources”, Int. Trans. Electrical Energy Systems, 2018; e2719. https://doi.org/10.1002/etep.2719.
J10. V. Khaligh, M. Oloomi-Buygi, A. Anvari-Moghaddam, J.M. Guerrero, “A Multi-Attribute Expansion Planning Model for Integrated Gas-Electricity System”, Energies, vol. 11, no.10 (2573), pp. 1-22, 2018.
J11. H. Rashidizaheh-Kermani, H.R. Najafi, A. Anvari-Moghaddam, J.M. Guerrero, “Optimal Decision-Making Strategy of an Electric Vehicle Aggregator in Short-Term Electricity Markets”, Energies, vol. 11, no.9 (2413), pp. 1-20, 2018.
J12. R. Sharifi, A. Anvari-Moghaddam, S. H. Fathi, J.M. Guerrero, V. Vahidinasab, “An Optimal Market-Oriented Demand Response Model for Price-Responsive Residential Consumers”, Journal of Energy Efficiency, 2018. https://doi.org/10.1007/s12053-018-9713-x
J13. S. Esmaeili, A. Anvari-Moghaddam, S. Jadid, J.M. Guerrero, “A Stochastic Model Predictive Control Approach for Joint Operational Scheduling and Hourly Reconfiguration of Distribution Systems”, Energies, vol. 11, no.7 (1884), pp. 1-19, 2018.
J14. B. Shakerighadi, A. Anvari-Moghaddam, J. Vasquez, and J. Guerrero, “Internet of Things for Modern Energy Systems: State-of-the-Art, Challenges and Open Issues,” Energies, vol. 11, no. 5, p. 1252, May 2018.
J15. N. Bazmohammadi, A.R. Tahsiri, A. Anvari-Moghaddam, J.M. Guerrero, “Optimal Operation Management of a Regional Network of Microgrids Based on Chance Constrained Model Predictive Control”, IET Gener. Trans. Dist., vol.12, no. 15, pp. 3772 – 3779, 2018.
J16. G. Mokhtari, A. Anvari-Moghaddam, Q. Zhang, M. Karunanithi, “Multi-Residential Activity Labelling in Smart Homes with Wearable Tags Using BLE Technology”, Sensors, vol.18, no.3, pp.1-16, 2018. DOI:10.3390/s18030908.
J17. M. Vahedipour-Dahraie, A. Anvari-Moghaddam, J.M. Guerrero, “Evaluation of Reliability in Risk-Constrained Scheduling of Autonomous Microgrids with Demand Response and Renewable Resources”, IET Renew. Power Gener. vol.12, no.6, pp. 657–667 2018. DOI:10.1049/iet-rpg.2017.0720.
J18. A. Frances, A. Anvari-Moghaddam, E. Rodriguez-Diaz, J.C. Vasquez, J.M. Guerrero, J. Uceda, “Dynamic Assessment of COTS Converters-based DC Integrated Power Systems in Electric Ships”, IEEE Trans. Industrial Informatics, vol.14, no. 12, pp. 5518-5529, 2018.
J19. M. Vahedipour-Dahraie, H.R. Najafi, A. Anvari-Moghaddam, J.M. Guerrero, “Security-Constrained Unit Commitment in AC Microgrids Considering Stochastic Price-Based Demand Response and Renewable Generation”, Int. Trans. Electrical Energy Systems, vol.28, no. e2596, pp. 1-26, 2018. https://doi.org/10.1002/etep.2596.
J20. H. Rashidizaheh-Kermani, H.R. Najafi, A. Anvari-Moghaddam, J.M. Guerrero, “Optimal Decision Making Framework of an Electric Vehicle Aggregator in Future and Pool markets”, Journal of Operation and Automation in Power Engineering, vol. 6, no.2, pp.157-168, 2018. DOI:10.22098/JOAPE.2006.3608.1288.
J21. B. Cao, J. Zhao, P. Yang, Z. Lv, X. Liu, X. Kang, S. Yang, K. Kang, A. Anvari-Moghaddam, “Distributed Parallel Cooperative Coevolutionary Multi-Objective Large-Scale Immune Algorithm for Deployment of Wireless Sensor Networks”, Future Generation Computer Systems, vol.82, pp. 256-267, 2018.
J22. A. Anvari-Moghaddam, J.M. Guerrero, J.C. Vasquez, H. Monsef, A. Rahimi-Kian, “Efficient Energy Management for a Grid-Tied Residential Microgrid”, IET Gener. Trans. Dist., vol. 11, no.11, pp. 2752 – 2761, 2017.
J23. H. Rashidizaheh-Kermani, M. Vahedipour-Dahraie, H.R. Najafi, A. Anvari-Moghaddam, J.M. Guerrero, “A Stochastic Bi-level Scheduling Approach for Participation of EV Aggregators in Competitive Electricity Markets”, Appl. Sci., vol.7, no.10-1100, pp.1-16, 2017.
J24. A. Anvari-Moghaddam, A. Rahimi-Kian, M.S. Mirian, J.M. Guerrero, “A Multi-Agent Based Energy Management Solution for Integrated Buildings and Microgrid System”, Applied Energy, vol. 203, pp. 41-56, 2017.
J25. M. Vahedipour-Dahraie, H.R. Najafi, A. Anvari-Moghaddam, J.M. Guerrero, “Optimal Scheduling of Distributed Energy Resources and Responsive Loads in Islanded Microgrids Considering Voltage and Frequency Security Constraints”, J. Renew. Sustain. Energy, vol.10. no.2, pp. 1-24, 2018. DOI. 10.1063/1.5027416.
J26. R. Sharifi, A. Anvari-Moghaddam, S. H. Fathi, J.M. Guerrero, V. Vahidinasab, “Economic Demand Response Model in Liberalized Electricity Markets with Respect to Flexibility of Consumers”, IET Gener. Trans. Dist., vol. 11, no.7, pp.4291 – 4298, 2017.
J27. M. Vahedipour-Dahraie, H. Rashidizaheh-Kermani, H.R. Najafi, A. Anvari-Moghaddam, J.M. Guerrero, “Stochastic Security and Risk-Constrained Scheduling for Microgrid with Demand Response and Renewable Energy Resources”, IET Renew. Power Gener., vol.11, no.14, pp. 1812-1821, 2017.
J28. P. Yang; F. Dong; V. codreanu; D. Williams; J. Roerdink; B. Liu; A. Anvari-Moghaddam; G. Min, "Improving Utility of GPU in Accelerating Industrial Applications with User-centred Automatic Code Translation," IEEE Tran. Industrial Informatics, vol.14, no.4, pp.1347-1360, 2018.
J29. R. Sharifi, A. Anvari-Moghaddam, S. H. Fathi, J.M. Guerrero, V. Vahidinasab, “Dynamic Pricing: An Efficient Solution for True Demand Response Enabling”, J. Renew. Sustain. Energy, vol. 9, no. 6, pp.1-14, 2017.
J30. M. Vahedipour-Dahraie, H. Rashidizaheh-Kermani, H.R. Najafi, A. Anvari-Moghaddam, J.M. Guerrero, “Coordination of EVs Participation for Load Frequency Control in Isolated Microgrids”, Appl. Sci., vol.7, no.6-539, pp.1-16, 2017.
J31. F.D. Kanellosa, A. Anvari-Moghaddam, J.M. Guerrero, “A Cost-effective and Emission-aware Power Management System for Ships with Integrated Full Electric Propulsion”, Electric Power Systems Research, vol. 150, pp. 63-75, 2017.
J32. M. Vahedipour-Dahraie, H.R. Najafi, A. Anvari-Moghaddam, J.M. Guerrero, “Study of the Effect of Time-Based Rate Demand Response Programs on Stochastic Day-Ahead Energy and Reserve Scheduling in Islanded Residential Microgrids”, Appl. Sci., vol.7, no.4-378, pp.1-19, 2017.
J33. G. Mokhtari, G. Nourbakhsh, A. Anvari-Moghadam, N. Ghasemi, A. Saberian, “Optimal Cooperative Management of Energy Storage Systems to Deal with Over- and Under-Voltages”, Energies, vol.10, no.3, pp. 1-17, 2017.
J34. K. Shahryari, A. Anvari-Moghaddam, S. Shahryari, “Demand Side Management Using the Internet of Energy Based on LoRaWAN technology”, Kurdistan Journal of Applied Research, vol. 2, no. 3, pp. 112-119, Aug. 2017.
J35. A. Ghasemkhani, H. Monsef, A. Rahimi-Kian, A. Anvari-Moghaddam, “Optimal Design of a Wide Area Measurement System for Improvement of Power Network Monitoring Using a Dynamic Multi-Objective Shortest Path Algorithm”, IEEE Systems Journal, vol. 11, no. 4, pp. 2303-2314, Dec. 2017.
J36. F.D. Kanellos, A. Anvari-Moghaddam, J.M. Guerrero, “Smart Shipboard Power System Operation and Management”, Inventions, vol.1, no.4, pp. 1-14, 2016.
J37. A. Anvari-Moghaddam, A. Rahimi-Kian, H. Monsef, “Optimal Smart Home Energy Management Considering Energy Saving and a Comfortable Lifestyle”, IEEE Trans. Smart Grid, vol.6, no.1, pp. 324-332, 2015.
J38. A. Anvari-Moghaddam, H. Monsef, A. Rahimi-Kian, “Cost-Effective and Comfort-Aware Residential Energy Management under Different Pricing Schemes and Weather Conditions”, Energy and Buildings, vol.86, pp. 782-793, 2015.
J39. A. Anvari-Moghaddam, H. Monsef, A. Rahimi-Kian, H. Nance, “Feasibility Study of a Novel Methodology for Solar Radiation Prediction on an Hourly Time Scale: A Case Study in Plymouth, UK.” Journal of Renewable and Sustainable Energy, vol.6, no.033107, 2014.
J40. M. Parvizimosaed, F. Farmani, A. Anvari-Moghaddam, A. Rahimi-Kian, H. Monsef, “A Multi-Objective Algorithm for Sitting and Sizing Renewable Resources in Distribution Network Considering Load Model”, Journal of Iranian Association of Electrical and Electronics Engineers (IAEEE), vol.12, no.1, pp. 1-12, 2014.
J41. M. Parvizimosaed, F. Farmani, A. Anvari-Moghaddam, “Optimal Energy Management of a Micro-Grid with Renewable Energy Resources and Demand Response”, Journal of Renewable and Sustainable Energy, vol.5, no.5, pp. 31-48, 2013.
J42. A. Anvari-Moghaddam, A.R.Seifi, T. Niknam, “Multi-operation management of a typical microgrid using Particle Swarm Optimization: A comparative study”, Renewable and Sustainable Energy Reviews, vol.16, no.2, pp. 1268-1281, 2012.
J43. A. Anvari-Moghaddam, A.R.Seifi, “Study of Forecasting Renewable Energies in Smart Grids Using Linear predictive filters and Neural Networks”, IET Renewable Power Generation, vol.5, no.6, pp. 470 – 480, 2011.
J44. A. Anvari-Moghaddam, A.R.Seifi, T. Niknam, M.R. Alizadeh Pahlavani, “Multi-objective Operation Management of a Renewable Micro Grid with Back-up Micro Turbine/Fuel Cell/Battery Hybrid Power Source”, Energy, vol.36, no.11, pp. 6490-6507, 2011.
J45. A. Anvari-Moghaddam, A.R.Seifi, “A Comprehensive Study on Future Smart Grids: Definitions, Strategies and Recommendations”, Journal of the North Carolina Academy of Science, JNCAS, vol.127, no.1, pp. 28-34, 2011.
J46. A. Anvari-Moghaddam, A.R.Seifi, “An advanced strategy for wind speed forecasting using expert 2-D FIR filters”, Advances in Electrical and Computer Engineering (AECE), vol.10, no.4, pp. 103-110, 2010.

Weinong Fu, PhD

ProfessorDepartment of Electrical EngineeringThe Hong Kong Polytechnic UniversityHunghom, Kowloon, Hong Kong
Prof. Fu obtained his BEng from Hefei University of Technology in 1982, MEng from Shanghai University of Technology in 1989 and PhD from The Hong Kong Polytechnic University in 1999.
Before he joined PolyU, he was one of the key developers at Ansoft Corporation in Pittsburgh, USA. He has about seven years of working experience at Ansoft, focusing on the development of commercial software Maxwell, which is a leading commercial software package for the computation of electromagnetic fields of electromechanical equipment. During 1982 to 1986, he worked at Shanghai Electrical Apparatus Research Institute, where he accumulated valuable experience to deal with the design and manufacturing of electric devices in practice, and constructed a solid foundation for further academic career development.
Prof. Fu has made many contributions to the theory and application of electromagnetic field computation and electric device design, including the publication of over 180 refereed journal papers. He regularly serves as a paper reviewer for IEEE Trans. Magnetics, IEEE Trans. Energy Conversion, IEEE Trans. Industrial Electronics, IEEE Trans. Power Electronics, IEEE Trans. Industry Application, Energies, and COMPUMAG, CEFC, INTERMAG international conferences.
Prof. Fu’s research interests mainly focus on computational electromagnetics, optimal design of electric devices, applied electromagnetics, and novel electric machines.
Patents granted
2017 - 2018
1. FU,Weinong, ZHANG,Xiu# and HO,Siu Lau, "SYSTEM AND METHOD FOR GENERATING AN ELECTROMAGNETIC FIELD MODEL". USA - US9697308 (Jul 2017)
2017 - 2018
1. SHENG,Tiantian#, NIU,SHUANGXIA, FU,Weinong and LIN,Qifang#, "Topology Exploration and Torque Component Analysis of Double Stator Biased Flux Machines Based on Magnetic Field Modulation Mechanism". IEEE Transactions on Energy Conversion, Vol. 33, No. 2, pp.584-593 (Jun 2018) ISSN 0885-8969(print), 1558-0059(electronic) (https://ieeexplore.ieee.org/document/8060599/)
2. LIU,Xiaoyu# and FU,Weinong, "Sub-region Alopex Optimization Method with RSM for Design of Permanent Magnet Machines". China Electrotechnical Society Transactions on Electrical Machines and Systems, Vol. 2, No. 2, pp.207-210 (Jun 2018) ISSN 20963564(print) (http://www.cestems.org/category/download)
3. ZHANG,Yunpeng#, HO,S.L. and FU,Weinong, "Heat transfer comparison of nanofluid filled transformer and traditional oil-immersed transformer". AIP Advances, Vol. 8, No. 5, pp.56724 (May 2018) ISSN 2158-3226(electronic) (http://aip.scitation.org/doi/10.1063/1.5006749)
4. LIU,Xiaoyu# and FU,Weinong, "Stabilized Bordered Block Diagonal Form for Solving Nonlinear Magnetic Field Problems". IEEE Transactions on Magnetics, Vol. 54, No. 3, pp.1-5 (Mar 2018) ISSN 0018-9464(print), 1941-0069(electronic) (http://ieeexplore.ieee.org/document/8070332/)
5. WANG,Yunchong, NIU,SHUANGXIA and FU,Weinong "A Novel Dual-Rotor Flux-Bidirectional- Modulation PM Generator for Stand-alone DC Power Supply". IEEE Transactions on Industrial Electronics, pp.1-1 (Jun 2018) ISSN 0278-0046(print), 1557-9948(electronic) (https://ieeexplore.ieee.org/document/8400582/)
6. WANG,Yunchong#, NIU,SHUANGXIA and FU,Weinong, "Sensitivity Analysis and Optimal Design of a Dual Mechanical Port Bidirectional Flux-Modulated Machine". IEEE Transactions on Industrial Electronics, Vol. 65, No. 1, pp.211-220 (Jan 2018) ISSN 0278-0046(print), 1557-9948(electronic) (http://ieeexplore.ieee.org/document/7956184/)
7. ZHANG,Yunpeng#, HO,S.L. and FU,Weinong, "A dynamic multi-level optimal design method with embedded finite-element modeling for power transformers". AIP Advances, Vol. 8, No. 5, pp.56610 (2018) ISSN 2158-3226(electronic) (http://aip.scitation.org/doi/10.1063/1.5006736)
8. CHEN,Yiduan#, FU,Weinong and WENG,Xu, "A Concept of General Flux-Modulated Electric Machines Based on a Unified Theory and Its Application to Developing a Novel Doubly-Fed Dual-Stator Motor". IEEE Transactions on Industrial Electronics, Vol. 64, No. 12, pp.9914-9923 (Dec 2017) ISSN 0278-0046(print), 1557-9948(electronic) (http://ieeexplore.ieee.org/document/7995081/)
9. LIU,Xiaoyu#, FU,Weinong and NIU,SHUANGXIA, "Optimal Structure Design of Permanent Magnet Motors Based on a General Pattern of Rotor Topologies". IEEE Transactions on Magnetics, Vol. 53, No. 11, pp.1-4 (Nov 2017) ISSN 0018-9464(print), 1941-0069(electronic) (http://ieeexplore.ieee.org/document/7913682/)
10. LIU,Xiaoyu#, LIN,Qifang# and FU,Weinong, "Optimal Design of Permanent Magnet Arrangement in Synchronous Motors". Energies, Vol. 10, No. 11, pp.1700 (Oct 2017) ISSN 1996-1073(electronic) (http://www.mdpi.com/1996-1073/10/11/1700)
11. WANG,Yunchong#, FU,Weinong, NIU,SHUANGXIA and LI,Xingjian "A novel stator and rotor dual PM flux modulated machine View Document". Chinese Journal of Electrical Engineering, Vol. 3, pp.10-15 (Jul 2017) ISSN 2096-1529(print)
12. ZHANG,Yunpeng#, HO,S.L. and FU,Weinong, "Applying Response Surface Method to Oil-Immersed Transformer Cooling System for Design Optimization". IEEE Transactions on Magnetics, pp.1-5 (Jun 2018) ISSN 0018-9464(print), 1941-0069(electronic) (https://ieeexplore.ieee.org/document/8387809/)
13. ZHAO,Xing#, NIU,SHUANGXIA and FU,Weinong, "Design and Comparison of Electrically Excited Double Rotor Flux Switching Motor Drive Systems for Automotive Applications". China Electrotechnical Society Transactions on Electrical Machines and Systems, Vol. 2, No. 2 (Jun 2018) ISSN 20963564(print) (http://www.cestems.org/category/download) (on-line publication)

2016 - 2017
1. ZHANG,Xiu, ZHANG,Xin and FU,Weinong, "Fast Numerical Method for Computing Resonant Characteristics of Electromagnetic Devices Based on Finite-Element Method". IEEE Transactions on Magnetics, Vol. 53, No. 6, pp.1-4 (Jun 2017) ISSN 0018-9464(print), 1941-0069
2. ZHAO,Yanpu and FU,Weinong, "A New Stable Full-Wave Maxwell Solver for All Frequencies". IEEE Transactions on Magnetics, Vol. 53, No. 6, pp.1-4 (Jun 2017) ISSN 0018-9464(print), 1941-0069
3. ZHAO,Yanpu and FU,Weinong, "A Novel Coulomb-Gauged Magnetic Vector Potential Formulation for 3-D Eddy-Current Field Analysis Using Edge Elements". IEEE Transactions on Magnetics, Vol. 53, No. 6, pp.1-4 (Jun 2017) ISSN 0018-9464(print), 1941-0069
4. ZHAO,Yanpu and FU,Weinong, "A Novel Formulation With Coulomb Gauge for 3-D Magnetostatic Problems Using Edge Elements". IEEE Transactions on Magnetics, Vol. 53, No. 6, pp.1-4 (Jun 2017) ISSN 0018-9464(print), 1941-0069
5. ZHAO,Yanpu and FU,Weinong, "A Novel Gauged Vector Potential Formulation for 3-D Motional Eddy-Current Problems Using Edge Elements". IEEE Transactions on Magnetics, Vol. 53, No. 6, pp.1-4 (Jun 2017) ISSN 0018-9464(print), 1941-0069
6. WANG,Yunchong#, NIU,SHUANGXIA and FU,Weinong, "Electrical-Continuously Variable Transmission System Based on Doubly Fed Flux-Bidirectional Modulation". IEEE Transactions on Industrial Electronics, Vol. 64, No. 4, pp.2722-2731 (Apr 2017) ISSN 0278-0046(print), 1557-9948
7. LI,Wei, FU,Weinong, KOH,Chang-Seop and WANG,Yangyang, "A Stable Iteration Procedure of Newton’s Method in Finite-Element Computation of Nonlinear Magnetic Field Problems With a Vector Hysteresis Model". IEEE Transactions on Magnetics, Vol. 53, No. 2, pp.1-6 (Feb 2017) ISSN 0018-9464
8. LIU,Huijuan, HAO,Yue and FU,Weinong, "Performance comparison of axial-flux-modulated motor with two pole-slot combinations". TURKISH JOURNAL OF ELECTRICAL ENGINEERING & COMPUTER SCIENCES, Vol. 25, pp.484-496 (Jan 2017) ISSN 13000632(print), 13036203
9. LIU,Yulong#, NIU,SHUANGXIA and FU,Weinong, "Design of an Electrical Continuously Variable Transmission Based Wind Energy Conversion System". IEEE Transactions on Industrial Electronics, Vol. 63, No. 11, pp.6745-6755 (Nov 2016) ISSN 0278-0046(print), 1557-9948
10. LI,X. G., LIU,Z. J., XIE,X. Y., KANG,A. G. and FU,Weinong, "Influence of Shape Anisotropy on Magnetization Dynamics Driven by Spin Hall Effect". Advances in Materials Science and Engineering, Vol. 2016, pp.1-8 (Nov 2016) ISSN 1687-8434(print), 1687-8442
11. FU,Weinong and LI,Longnyu, "Optimal Design of Magnetic Gears With a General Pattern of Permanent Magnet Arrangement". IEEE Transactions on Applied Superconductivity, Vol. 26, No. 7, pp.1-5 (Oct 2016) ISSN 1051-8223(print), 1558-2515
12. LUO,Xiang, NIU,SHUANGXIA and FU,Weinong, "Design and Sensorless Control of a Novel Axial-Flux Permanent Magnet Machine for In-Wheel Applications". IEEE Transactions on Applied Superconductivity, Vol. 26, No. 7, pp.1-5 (Oct 2016) ISSN 1051-8223(print), 1558-2515
13. GUO,Xinhua, WU,Shaozhe, FU,Weinong, LIU,Yulong#, WANG,Yunchong# and ZENG,Peihuang, "Control of a Dual-Stator Flux-Modulated Motor for Electric Vehicles". Energies, Vol. 9, No. 7, pp.517 (Jul 2016) ISSN 1996-1073

2015-2016
1. WANG,Yunchong#, FU,W. N. and NIU,SHUANGXIA, "A Novel Structure of Dual-Stator Hybrid Excitation Synchronous Motor". IEEE Transactions on Applied Superconductivity, Vol. 26, No. 4, pp.1-5 (Jun 2016) ISSN 1051-8223(print), 1558-2515(electronic)
2. FU,W. N. and CHEN,Yiduan, "A Post-Assembly Magnetization Method for a Line-Start Permanent-Magnet Motor". IEEE Transactions on Applied Superconductivity, Vol. 26, No. 4, pp.1-4 (Jun 2016) ISSN 1051-8223(print), 1558-2515(electronic)
3. LIU,Xiaoyu# and FU,W. N., "A Dynamic Dual-Response-Surface Methodology for Optimal Design of a Permanent-Magnet Motor Using Finite-Element Method". IEEE Transactions on Magnetics, Vol. 52, No. 3, pp.1-4 (Mar 2016) ISSN 0018-9464(print), 1941-0069(electronic)
4. YANG,Lin#, HO,S.L., FU,W. N. and LIU,Lei, "A Mesh Deformation Algorithm and Its Application in Optimal Motor Design". IEEE Transactions on Magnetics, Vol. 52, No. 3, pp.1-4 (Mar 2016) ISSN 0018-9464(print), 1941-0069(electronic)
5. FU,W. N., ZHAO,Yanpu#, HO,S.L. and ZHOU,Ping, "An Electromagnetic Field and Electric Circuit Coupled Method for Solid Conductors in 3-D Finite-Element Method". IEEE Transactions on Magnetics, Vol. 52, No. 3, pp.1-4 (Mar 2016) ISSN 0018-9464(print), 1941-0069(electronic)
6. HO,S.L., ZHAO,Yanpu#, FU,W. N. and ZHOU,Ping, "Application of Edge Elements to 3-D Electromagnetic Field Analysis Accounting for Both Inductive and Capacitive Effects". IEEE Transactions on Magnetics, Vol. 52, No. 3, pp.1-4 (Mar 2016) ISSN 0018-9464(print), 1941-0069(electronic)
7. WANG,Yunchong#, NIU,SHUANGXIA, FU,W. N. and HO,S.L., "Design and Optimization of Electric Continuous Variable Transmission System for Wind Power Generation". IEEE Transactions on Magnetics, Vol. 52, No. 3, pp.1-4 (Mar 2016) ISSN 0018-9464(print), 1941-0069(electronic)
8. FU,W. N., YANG,Shiyou and HO,S.L., "Iron Loss Separation in High Frequency Using Numerical Techniques". IEEE Transactions on Magnetics, Vol. 52, No. 3, pp.1-4 (Mar 2016) ISSN 0018-9464(print), 1941-0069(electronic)
9. LIU,Yulong#, FU,W. N., LI,Wei and SUN,Mingui, "Design and Analysis of a Shoe-Embeded Power Harvester Based on Magnetic Gear". IEEE Transactions on Magnetics, Vol. 52, No. 7, pp.1-4 (Jan 2016) ISSN 0018-9464(print), 1941-0069(electronic)
10. CHEN,Yiduan, FU,W. N. and LI,Wei, "Performance Analysis of a Novel Triple-Permanent-Magnet- Excited Magnetic Gear and Its Design Method". IEEE Transactions on Magnetics, Vol. 52, No. 7, pp.1-4 (Jan 2016) ISSN 0018-9464(print), 1941-0069(electronic)
11. WANG,Yunchong#, NIU,SHUANGXIA and FU,W. N., "Electromagnetic Performance Analysis of Novel Flux-Regulatable Permanent Magnet Machines for Wide Constant-Power Speed Range Operation". Energies, Vol. 8, No. 12, pp.13971-13984 (Dec 2015) ISSN 1996-1073(print), 1996-1073(electronic)
12. LIU,H. J., HAO,Y., ZHANG,Z. Y. and FU,W. N., "Investigation and analysis of amorphous magnetic materials for hybrid-flux-modulated motor". Materials Research Innovations, Vol. 19, No. sup10, pp.423-430 (Dec 2015) ISSN 1432-8917(print), 1433-075X(electronic)
13. LIU,Lei,YU,Chuang, NIU,SHUANGXIA, HO,S.L. and FU,W. N., "Magnetic Circuit Analysis for a Magnetless Double-Rotor Flux Switching Motor". IEEE Transactions on Magnetics, Vol. 51, No. 11, pp.1-5 (Nov 2015) ISSN 0018-9464(print), 1941-0069(electronic)
14. NIU,SHUANGXIA, FU,W. N. and HO,S.L., "Nonlinear Convergence Acceleration of Magnetic Field Computation". IEEE Transactions on Magnetics, Vol. 51, No. 11, pp.1-4 (Nov 2015) ISSN 0018-9464(print), 1941-0069(electronic)
15. FU,W. N., CHEN,Yiduan and GUO,Xinhua, "Novel Dual-Layer and Triple-Layer Permanent-Magnet-Excited Synchronous Motors". IEEE Transactions on Magnetics, Vol. 51, No. 11, pp.1-4 (Nov 2015) ISSN 0018-9464(print), 1941-0069(electronic)
16. HO,S.L., WANG,Qingsong#, NIU,SHUANGXIA and FU,W. N., "A Novel Magnetic-Geared Tubular Linear Machine With Halbach Permanent-Magnet Arrays for Tidal Energy Conversion". IEEE Transactions on Magnetics, Vol. 51, No. 11, pp.1-4 (Nov 2015) ISSN 0018-9464(print), 1941-0069(electronic)
17. YANG,Lin#, HO,S.L., FU,W. N. and LI,Wei, "Design Optimization of a Permanent Magnet Motor Derived From a General Magnetization Pattern". IEEE Transactions on Magnetics, Vol. 51, No. 11, pp.1-4 (Nov 2015) ISSN 0018-9464(print), 1941-0069(electronic)
18. WANG,Qingsong#, NIU,SHUANGXIA, HO,S.L., FU,W. N. and ZUO,Shuguang, "Design and analysis of novel magnetic flux-modulated mnemonic machines". IET Electric Power Applications, Vol. 9, No. 7, pp.469-477 (Aug 2015) ISSN 1751-8660(print), 1751-8679(electronic)
19. LIU,Huijuan, HAO,Yue, NIU,SHUANGXIA and FU,W. N., "Computation of Electromagnetic Losses in Double-Rotor Vernier PM Motors with Three Topologies Using TS-FEM". International Review of Electrical Engineering (IREE), Vol. 10, No. 1, pp.22-27 (Jul 2015) ISSN 1827-6660(print), 1827-6679(electronic)

2013-2014
1. NIU,SHUANGXIA, HO,S.L., FU,W. N., Chau,K. T. and Lin,F., "A feasibility study on a new brushless and gearless contra-rotating permanent magnet wind power generator". Journal of Applied Physics, Vol. 115, No. 17, pp.1-3 (May 2014) ISSN 0021-8979(print), 1089-7550(electronic)
2. HO,S.L., ZHAO,YANPU and FU,W. N., "Adaptive Discontinuous Galerkin Method for Transient Analysis of Eddy Current Fields in High-Speed Rotating Solid Rotors". IEEE Transactions on Magnetics, Vol. 50, No. 2, pp.589-592 (Feb 2014) ISSN 0018-9464(print), 1941-0069(electronic)
3. Liu,Yulong#, HO,S.L. and FU,W. N., "Novel Electrical Continuously Variable Transmission System and its Numerical Model". IEEE Transactions on Magnetics, Vol. 50, No. 2, pp.757-760 (Feb 2014) ISSN 0018-9464(print), 1941-0069(electronic)
4. FU,W. N., ZHANG,XIU and HO,S.L., "A Fast Frequency-Domain Parameter Extraction Method Using Time-Domain FEM". IEEE Transactions on Magnetics, Vol. 50, No. 2, pp.433-436 (Feb 2014) ISSN 0018-9464(print), 1941-0069(electronic)
5. ZHANG,XIU, Zhang,Xin, HO,S.L. and FU,W. N., "A Modification of Artificial Bee Colony Algorithm Applied to Loudspeaker Design Problem". IEEE Transactions on Magnetics, Vol. 50, No. 2, pp.737-740 (Feb 2014) ISSN 0018-9464(print), 1941-0069(electronic)
6. NIU,SHUANGXIA, HO,S.L. and FU,W. N., "A Novel Stator and Rotor Dual PM Vernier Motor With Space Vector Pulse Width Modulation". IEEE Transactions on Magnetics, Vol. 50, No. 2, pp.805-808 (Feb 2014) ISSN 0018-9464(print), 1941-0069(electronic)
7. Zhao,Yanpu#, HO,S.L. and FU,W. N., "An adaptive degrees-of-freedom finite-element method for transient magnetic field analysis". IEEE Transactions on Magnetics, Vol. 49, No. 12, pp.5724-5729 (Dec 2013) ISSN 0018-9464(print), 1941-0069(electronic)
8. Zhang,Xin, ZHANG,XIU, Yuen,Shiu Yin, HO,S.L. and FU,W. N., "An Improved Artificial Bee Colony Algorithm for Optimal Design of Electromagnetic Devices". IEEE Transactions on Magnetics, Vol. 49, No. 8, pp.4811-4816 (Aug 2013) ISSN 0018-9464(print), 1941-0069(electronic)
9. CHEN,QUAN, HO,S.L. and FU,W. N., "A New Low Radiation Wireless Transmission System in Mobile Phone Application Based on Magnetic Resonant Coupling". IEEE Transactions on Magnetics, Vol. 49, No. 7, pp.3476-3479 (Jul 2013) ISSN 0018-9464(print), 1941-0069(electronic)
10. NIU,SHUANGXIA, HO,S.L. and FU,W. N., "A Novel Double-Stator Double-Rotor Brushless Electrical Continuously Variable Transmission System". IEEE Transactions on Magnetics, Vol. 49, No. 7, pp.3909-3912 (Jul 2013) ISSN 0018-9464(print), 1941-0069(electronic)
11. WANG,YUNCHONG, HO,S.L., FU,W. N. and Shen,J. X., "A Novel Rotor Position Detection Method for Sensorless Control of Magnetic-Geared Permanent-Magnet Brushless Motor". IEEE Transactions on Magnetics, Vol. 49, No. 7, pp.3961-3964 (Jul 2013) ISSN 0018-9464(print), 1941-0069(electronic)
12. Zhao,Yanpu#, HO,S.L. and FU,W. N., "An Operator Splitting Finite Element Method for Eddy-Current Field Analysis in High-Speed Rotating Solid Conductors". IEEE Transactions on Magnetics, Vol. 49, No. 7, pp.3171-3174 (Jul 2013) ISSN 0018-9464(print), 1941-0069(electronic)

2012-2013
1. FU, W.N. and HO, S.L., " Instantaneous Power Balance Analysis in Finite-Element Method of Transient Magnetic Field and Circuit Coupled Computation ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 5, pp.1561-1564 (May 2013)
2. HO, S.L., ZHANG, XIU and FU, W.N., " Extension of Time-Domain Finite Element Method to Nonlinear Frequency-Sweeping Problems ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 5, pp.1781-1784 (May 2013)
3. HO, S.L., ZHAO, YANPU and FU, W.N., " A Novel Mesh Morphing Technique for Large Shape Deformation and Its Application to Optimal Design Problems ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 5, pp.2165-2168 (May 2013)
4. ZHANG, XIU, LI, H.L., HO, S.L. and FU, W.N., " A Multi-Slice Finite Element Model Including Distributive Capacitances for Wireless Magnetic Resonant Energy Transfer Systems with Circular Coils ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 5, pp.1857-1860 (May 2013)
5. NIU, SHUANGXIA, HO, S.L. and FU, W.N., " Design of a Novel Electrical Continuously Variable Transmission System Based on Harmonic Spectra Analysis of Magnetic Field ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 5, pp.2161-2164 (May 2013)
6. NIU, SHUANGXIA, HO, S.L. and FU, W.N., " Power Balanced Electromagnetic Torque Computation in Electric Machines Based on Energy Conservation in Finite-element Method ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 5, pp.2385-2388 (May 2013)
7. ZHANG, XIU, HO, S.L. and FU, W.N., " A Hybrid Optimal Design Strategy of Wireless Magnetic-Resonant Charger for Deep Brain Stimulation Devices ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 5, pp.2145-2148 (May 2013)
8. ZHAO, YANPU, HO, S.L. and FU, W.N, " A Novel Adaptive Mesh Finite Element Method for Nonlinear Magnetic Field Analysis ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 5, pp.1777-1780 (May 2013)
9. FU, W.N., ZHANG, XIU and HO, S.L., " A general time-domain finite-element method for frequency-domain solutions ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 4, pp.1284-1289 (April 2013)
10. FU, W.N., ZHANG, XIU and HO, S.L., " A Fast Algorithm for Frequency-domain Solutions of Electromagnetic Field Computation of Electric Devices Using Time-domain Finite-element Method ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 49, No. 1, pp.530-535 (Jan 2013)
11. CHEN, QUAN, HO, S.L. and FU, W.N., " Numerical Investigation of Magnetic Resonant Coupling Technique in Inter-Chip Communication via Electromagnetics-TCAD Coupled Simulation ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4253-4256 (Nov 2012)
12. FU, W.N., HO, S.L. and ZHOU, PING, " Reduction of computing time for steady-state solutions of magnetic field and circuit coupled problems using time-domain finite element method ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.3363-3366 (Nov 2012)
13. HO, S.L., JIAN, LINNI, GONG, W. and FU, W.N., " Design and Analysis of a Novel Targeted Magnetic Fluid Hyperthermia System for Tumor Treatment ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.3262-3265 (Nov 2012)
14. HO, S.L., LI, H.L. and FU, W.N., " A Post-assembly Magnetization Method of Direct-start Interior Permanent Magnet Synchronous Motors and its Finite-element Analysis of Transient Magnetic Field ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.3238-3241 (Nov 2012)
15. HO, S.L., NIU, SHUANGXIA and FU, W.N. " Design and Analysis of Novel Focused Hyperthermia Devices ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.3254-3257 (Nov 2012)
16. HO, S.L., ZHAO, YANPU and FU, W.N. " A Characteristic Galerkin Method for Eddy-current Field Analysis in High-speed Rotating Solid Conductors ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4634-4637 (Nov 2012)
17. HO, S.L., ZHAO, YANPU and FU, W.N., " An Efficient Parameterized Mesh Method for Large Shape Variation in Optimal Designs of Electromagnetic Devices ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4507-4510 (Nov 2012)
18. KO, YIK YAN#, HO, S.L., FU, W.N. and ZHANG, XIU, " A Novel Hybrid Resonator for Wireless Power Delivery in Bio-Implantable Devices ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4518-4521 (Nov 2012)
19. LI, H.L., HO, S.L. and FU, W.N., " Precise Magnetic Field Modeling Techniques of Rotary Machines Using Transient Finite-element Method ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4192-4195 (Nov 2012)
20. LIU, HUIJUAN, XU, LONGYA, SHANGGUAN, MINGZHU and FU, W.N., " Finite Element Analysis of 1 MW High Speed Wound-Rotor Synchronous Machine ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4650-4653 (Nov 2012)
21. NIU, SHUANGXIA, CHEN, NINGNING, HO, S.L. and FU, W.N., " Design Optimization of Magnetic Gears Using Mesh Adjustable Finite Element Algorithm for Improved Torque ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4156-4159 (Nov 2012)
22. WANG, JUNHUA#, LI, JIANGUI, HO, S.L., FU, W.N. and SUN, MINGUI, " Lateral and Angular Misalignments Analysis of a New PCB Circular Spiral Resonant Wireless Charger ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4522-4525 (Nov 2012)
23. WANG, YUNCHONG, HO, S.L., FU, W.N. and SHEN, J.X., " A Novel Brushless Doubly Fed Generator for Wind Power Generation ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4172-4175 (Nov 2012)
24. ZHANG, XIU, HO, S.L. and FU, W.N., " Analysis and Optimization of Magnetically Coupled Resonators for Wireless Power Transfer ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4511-4514 (Nov 2012)
25. ZHANG, XIU, HO, S.L. and FU, W.N., " Quantitative Design and Analysis of Relay Resonators in Wireless Power Transfer System ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4026-4029 (Nov 2012)
26. ZHANG, XIU, ZHAO, YANPU, HO, S.L. and FU, W.N., " Analysis of Wireless Power Transfer System Based on 3-D Finite Element Method Including Displacement Current ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.3692-3695 (Nov 2012)
27. ZHAO, YANPU, ZHANG, XIU, HO, S.L. and FU, W.N., " An Adaptive Mesh Method in Transient Finite Element Analysis of Magnetic Field Using a Novel Error Estimator ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 11, pp.4160-4163 (Nov 2012)

2011-2012
1. FU, W. N., HO, S. L., NIU, SHUANGXIA and ZHU, JIANGUO, " Comparison Study of Finite Element Methods Dealing with Floating Conductors in Electric Field ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.351-354 (2012)
2. HO, S. L., NIU, SHUANGXIA, FU, W. N. and ZHU, JIANGUO, " A convenient mesh rotation method of finite element analysis using sub-matrix transformation approac ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.303-306 (2012)
3. HO, S. L., NIU, SHUANGXIA, FU, W. N. and ZHU, JIANGUO, " A Mesh-insensitive Methodology for Magnetic Force Computation in Finite-element Analysis ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.287-290 (2012)
4. HO, S. L., NIU, SHUANGXIA, FU, W. N. and ZHU, JIANGUO, " A Power Balanced Time-stepping Finite Element Method for Transient Magnetic Field Computation ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.291-294 (2012)
5. HO, S. L., NIU, SHUANGXIA, FU, W. N. and ZHU, JIANGUO, " A sensitivity analysis method for equivalent parameter extraction of transient magnetic field problems with internal coupled circuits ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.295-298 (2012)
6. HO, S. L., ZHAO, YANPU# and FU, W. N., " A Local Discontinuous Galerkin Method for Numerical Computation of Waveguide Eigenvalue Problems in Polar Coordinates ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.255-258 (2012)
7. JAN, KUMBERNUSS, CHEN, JIAN, WANG, JUNHUA#, YANG, H. X. and FU, W.N., " A novel magnetic levitated bearing system for Vertical Axis Wind Turbines (VAWT) ". APPLIED ENERGY, Vol. 90, No. 1, pp.148-153 (2012)
8. JIAO, CHAOQUN, XIA, ZHANJUN and FU, WEINONG, " A Generalized Multi-conductor Transmission Lines (MTLs) Model and Optimized Method for the Solution of the MTLs Equations ". International Journal of Antennas and Propagation, Vol. 2012, No. Article ID 827240, pp.1-7 (2012)
9. LI, H. L., HO, S. L. and FU, W. N., " Application of Multi-stage Diagonally-implicit Runge-Kutta Algorithm to Transient Magnetic Field Computation Using Finite Element Method ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.279-282 (2012)
10. WANG, ZHAO#, NIU, SHUANGXIA, HO, S. L., FU, W. N. and ZHU, JIANGUO, " A Position Detection Strategy for Sensorless Surface Mounted Permanent Magnet Motors at Low Speed Using Transient Finite-Element Analysis ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.1003-1006 (2012)
11. YIN, N., XU, G., YANG, Q., ZHAO, J., YANG, X., JIN, J., FU, WEINONG and SUN, M., " Analysis of Wireless Energy Transmission for Implantable Device Based on Coupled Magnetic Resonance ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.723-726 (2012)
12. NIU, SHUANGXIA, HO, S. L., FU, W. N. and ZHU, JIANGUO, " Eddy current reduction in high-speed machines and loss analysis with multislice time-stepping finite-element method ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.1007-1010 (2012)
13. WANG, JUNHUA#, LI, JIANGUI, HO, S. L., FU, W. N., ZHAO, ZHIGANG, YAN, WEILI and SUN, MINGUI, " Analytical study and corresponding experiments for a new resonant magnetic charger with circular spiral coils ". JOURNAL OF APPLIED PHYSICS, Vol. 111, No. 7, pp.1-3 (2012) (Article No.: 07E704)
14. ZHAO, YANPU#, NIU, SHUANGXIA, HO, S. L., FU, W. N. and ZHU, JIANGUO, " A Parameterized Mesh Generation and Refinement Method for Finite Element Parameter Sweeping Analysis of Electromagnetic Devices ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.239-242 (2012)
15. ZHAO, YANPU#, ZHANG, XIU#, HO, S. L. and FU, W. N., " A Local Discontinuous Galerkin Method for Eddy Current Field Analysis in High-speed Moving Conductors ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 48, No. 2, pp.251-254 (2012)
16. LI, Y.B., NIU, SHUANGXIA, HO, S. L., LI, YANHAI and FU, W. N., " Hysteresis Effects of Laminated Steel Materials on Detent Torque in Permanent Magnet Motors ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.3594-3597 (2011)
17. LIU, YONG, TONG, CHENGDE, BAI, JINGANG, YU, SHUANG, TONG, WEIMING and FU, W. N., " Optimization of an 80 kW Radial-Radial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for HEVs ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.2399-2402 (2011)
18. LUO, XIAO#, NIU, SHUANGXIA, HO, S. L. and FU, W. N., " A Design Method of Magnetically Resonanting Wireless Power Delivery Systems for Bio-Implantable Devices ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.3833-3836 (2011)
19. NIU, SHUANGXIA, HO, S. L. and FU, W. N., " Performance Analysis of a Novel Magnetic-Geared Tubular Linear Permanent Magnet Machine ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.3598-3601 (2011)
20. JIN, LIANG, YANG, QINGXIN, LIU, SUZHEN, ZHANG, CHUANG, XU, GUIZHI, YAN, WEILI and FU, W. N., " Enhanced Acoustic Emission Detection Induced by Electromagnetic Stimulation With External Magnetic Field ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.3284-3287 (2011)
21. HO, S. L., CHEN, NINGNING# and FU, W. N., " A Moving Mesh Embedded Algorithm in Finite Element Method for Optimal Design of Electromagnetic Devices ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.2947-2950 (2011)
22. HO, S. L., NIU, SHUANGXIA and FU, W. N., " An Equivalent Parameter Extraction Method of Transient Electric Circuit and Magnetic Field Coupled Problem Based on Sensitivity Computation of System Equations ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 8, pp.2068-2075 (2011)
23. HO, S. L., NIU, SHUANGXIA and FU, W. N., " Design and Analysis of a Novel Axial-Flux Machine ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.4368-4371 (2011)
24. HO, S. L., NIU, SHUANGXIA and FU, W. N., " Design and Comparison of Vernier Permanent Magnet Machines ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.3280-3283 (2011)
25. NIU, SHUANGXIA, ZHAO, YANPU, HO, S. L. and FU, W. N., " A Parameterized Mesh Technique for Finite Element Magnetic Field Computation and its Application to Optimal Designs of Electromagnetic Devices ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.2943-2946 (2011)
26. WANG, JUNHUA#, HO, S. L., FU, W. N. and SUN, MINGGUI, " Analytical Design Study of a Novel Witricity Charger with Lateral and Angular Misalignments for Efficient Wireless Energy Transmission ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.2616-2619 (2011)
27. WANG, JUNHUA#, HO, S. L., FU, W. N. and SUN, MINGGUI, " FEM Simulations and Experiments for the Advanced Witricity Charger with Compound Nano-TiO2 Interlayers ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.4449-4452 (2011)
28. WANG, YOUHUA, WANG, JUNHUA#, HO, S. L., YANG, XIAOGUANG, FU, W. N. and XU, GUIZHI, " Design and FEM Analysis of a New Distributed Vernier Traveling Wave Induction Heater for Heating Moving Thin Strips ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.2612-2615 (2011)
29. ZHANG, XIU#, HO, S. L. and FU, W. N., " Quantitative Analysis of a Wireless Power Transfer Cell with Planar Spiral Structures ". IEEE TRANSACTIONS ON MAGNETICS, Vol. 47, No. 10, pp.3200-3203 (2011)

Manu Mitra

Department of Electrical EngineeringUniversity of BridgeportUSA
Qualifications Summary
• Total of 8+ years of experience in Systems Analyst for various applications in ETL/data warehousing, Enterprise Business Intelligence, GUI, Web-Based, Client-Server, metadata repositories, data migration, data mining, distributed data design, and decision support systems.
• Around 3+ years of experience in Executive of IT Operations demonstrated success in coordinating with team leads to determine technology needs for existing and upcoming business objectives, directing and managing projects to completion, coordinating internal and external resources, and managing the budget and strategy to ensure top rated product development, sales, and customer support levels
• Proven ability in bridging communication gaps between technical departments and stakeholders, implementing continuous improvement processes within project life cycles, improving performance measurements through mentoring and coaching, building business strategies by way of competitive analysis and customer collaboration
• Expertise in working with Operations and IT in maintaining software systems including implementation, configuration, training, upgrading, interfacing
• Strong exposure and Experience to the Software Development Life Cycle (SDLC) and extensive experience with QA testing methodologies, Procedures, Processes, standards and activities.
• Strong analytical and QA/ testing skills, capacity for work and diagnostic ability, Gathering different kind of projects requirement. Covered Agile and Waterfall models of SDLC.
• Has expertise in Test Case Design, Test Tool Usage, Test Execution, and Defect Management.
• Experienced in ETL/BI testing and written complex SQL queries to validate the data against different systems
• Extensively strong on databases including Oracle, MS SQL Server, and Teradata
• Experienced in testing different source feeds of data for ETL and prepared mock data for ETL.
• Experience in testing Business Report developed in OBIEE, Hyperion, Micro strategy, Business Objects XIR2.
• Experience in UNIX shell scripting and configuring cron-jobs for Informatica sessions scheduling
• Expertise in Testing complex Business rules by creating mapping and various transformations
• Experience in Performance Tuning of SQL and Stored Procedures.
• Analyzed and tuned database and SQL statements and schemas for optimal performance.
• Performed Functional testing, Black box testing, GUI testing, Batch testing, Back-end testing and Regression testing.
• Extensive experience in preparing test requirements, test plans, test cases, test defect reports, and performing Black Box, Regression, Integration and User Acceptance testing (UAT).
• Effective independently or in a team. Communication as well as inter-personnel skills. Ability to convey technical information at all levels. Excels in research, analysis and problem-solving skills.
Electrical Engineering, Nanotechnology, Nanomedicine, Robotics, Quantum Physics, Physics, Electromagnetics.
Professional Membership
• Member of IEEE (Institute of Electrical and Electronics Engineering) for fourteen years [Member No. 80399531]
• Life Member at Eurasia Research [Member No. STRA-M18148]
• Senior Member of IACSIT (International Association of Computer Science and Information Technology) [Member No: 80349719]
• Senior Member of ASR (Asia Society of Researchers) [Member No: R218092302]
• Professional Member at IAER (International Association for Educators and Researchers) in Mechanical Engineering [Member No: 180936]
• Member of IAENG (International Association of Engineers) [Member No: 148512]
• Member of ICSES (International Computer Science and Engineering Society) [Member No: 251]
• Member of IEDRC (International Economics Development Research Center) [Member No: 90080625]
• Member of SDIWC (The Society of Digital Information and Wireless Communications) [Member No: 22304]
• Associate Member of IAOIP (International Association of Innovation Professionals) [Member No: 55759946]
Honorary Membership
• Member of Golden Key International Honor Society [Member No: 16342916]
• Fellow Member of Universal Association of Computer and Electronics Engineers (UACEE) in Institute of Research Engineers and Doctors (IRED) [Member No: SM10100060261]
Professional Certifications
• Professional Engineer Certification [Registration No: PE/00142/17]
Research Articles
01) Secured Registration/Transaction using fingerprint recognition for an Automatic Teller Machine (ATM) (Research Paper)
DOI: 10.4172/2324-9307.1000136
02) Iron Man Suitcase (Research Paper)
DOI: 10.4172/2325-9833.1000120
03) Iron Man Thrust Boots (Research Paper)
DOI: 10.4172/2325-9833.1000132
04) Medical Nanobot for Cell and Tissue Repair (Research Paper)
DOI: 10.15406/iratj.2017.02.00038
05) Algorithm of Medical Nanobot using C++ (Research Paper)
DOI: 10.31021/acs.20181112
06) Introduction on Nanotechnology and Carbon Nanotubes to reduce air pollution on large scale emissions and Strategic Analysis of Climate Change (Research Paper)
DOI: 10.15406/iratj.2018.04.00094
07) Quantum Matrices using Quantum Gates (Research Paper)
DOI: 10.13140/RG.2.2.32591.94887
08) Multiple Quantum dot tunneling in a semiconductor, its wave function and probability density (Research Paper)
DOI: 10.13140/RG.2.2.20930.63689
09) Electrodynamic and plasmonic features of Nanoplasmonic Bow Tie Antenna (Research Paper)
DOI: 10.13140/RG.2.2.21571.25120
10) Quantum Mechanical and Semi-Classical Electrostatics Characteristics on SOI (Silicon on Insulator) Trigates (Research Article)
DOI: 10.5281/zenodo.2551287
11) Thermoelectric Power Factor for various temperature gradients in nanocrystalline composites (Research Paper)
DOI: 10.5281/zenodo.2552302
Health Care Policy (Public Policy)
12) Free universal health care system in United States (Health Care Policy)
DOI: 10.15406/sij.2018.02.00137
Review Articles
13) Nikola Tesla’s Free Electricity Electronic Circuit (Review Paper)
DOI: 10.13140/RG.2.2.13719.21921
14) Introduction on Carbon Nanotubes (CNT) and its applications in Electronic Circuits (Review Paper)
DOI: 10.26689/jera.v2i2.339
15) Nano Complementary Metal Oxide Semi-Conductor (CMOS) using carbon nanotube (Review Paper)
DOI: 10.15406/eetoaj.2018.02.00032
16) Neural Processor in Artificial Intelligence advancement (Review Paper)
DOI: 10.63019/jai.v1i1.10
17) Analysis of biological Neuron and training of an Artificial Neuron for a Neural Processor Construct (Review Paper)
DOI: 10.15406/iratj.2018.04.00157
18) Simple and Multi-layered Quantum dot in various structures (Review Paper)
DOI: 10.26689/jera.v2i4.509
Mini Review Article(s)
19) Advancements in Control Systems (Mini Review)
DOI: 10.15406/iratj.2018.04.00154
Short Communications
20) Advanced Instrumentation and Its Uses (Short Communication)
DOI: 10.13140/RG.2.2.17387.59682
21) Nursing and its importance in future (Short Communication)
DOI: 10.13140/RG.2.2.31850.57287
Editorial Articles
22) Synopsis from an Editor (Editorial)
DOI: 10.15406/iratj.2017.02.00039
23) Editorial on Future of Advanced Robotics and its applications (Editorial)
DOI: 10.15406/iratj.2017.03.00051
24) Editorial on Advanced Nanomedicine (Editorial)
DOI: 10.13140/RG.2.2.12041.49762
25) Editorial on Advanced Optics (Editorial)
DOI: https://doi.org/10.26689/jera.v2i3.378
26) Editorial on Robotics and Artificial Intelligence (Editorial)
DOI: 10.15406/iratj.2018.04.00138
27) Editorial on Advanced Quantum Computers (Editorial)
DOI: 10.15406/iratj.2018.04.00146
28) Advanced Electromagnetics (Editorial)
DOI: 10.5281/zenodo.1560583
Letters to Editor
29) Editorial on Advanced Microbiology Research (Letter to Editor)
DOI: 10.13140/RG.2.2.35529.60006
30) Editorial on Advanced Biological Virus (Letter to Editor)
DOI: 10.13140/RG.2.2.34164.81289
31) Editorial on Advances in Artificial Heart (Letter to Editor)
DOI: 10.13140/RG.2.2.10544.40963
32) Infectious characteristics of Ebola virus (Letter to Editor)
DOI: 10.23937/2469-567X/1510044
33) Introduction on Autism genetics
DOI: 10.5281/zenodo.2535491
34) DNA Sequencing basics and its applications
DOI: 10.5281/zenodo.2545604
35) Pancreatic cancer and its treatment (Letter to Editor)
DOI: 10.5281/zenodo.2549685
36) Elements of RNA, its techniques and applications (Letter to Editor)
DOI: 10.5281/zenodo.2552818
37) Microwaves and its advancement (Letter to Editor)
DOI: 10.28964/EngPress-2-114
38) Significance of Nuclear Energy and its complex necessity (Letter to Editor)
DOI: 10.15406/eetoaj.2018.02.00023
39) Advances in Cybernetics technology (Letter to Editor)
DOI: 10.31031/COJEC.2018.01.000519

Jun Yan, PhD

ProfessorCollege of Material Science and Chemical EngineeringHarbin Engineering University145 Nantong Street, Harbin 150001, P. R. China
Jun Yan received his B.E. and Ph.D. degrees from Harbin Engineering University in 2005 and 2010, respectively. Then he worked as a lecturer at Harbin Engineering University in 2010 and was appointed a full professor in 2014. Between 2015 and 2016, he worked as a visiting professor at Drexel University under the supervision of Prof. Yury Gogotsi. He has been awarded 2018 Highly Cited Researcher from Clarivate Analytics and Young Top-Notch Talent of National Ten Thousand Talent Program from China. He has published more than 90 peer-reviewed articles in TOP journals, such as Energy Environ. Sci., Adv. Mater., Adv. Energy Mater., ACS Nano, Adv. Funct. Mater., Nano Energy, Chem. Mater. and J. Mater. Chem. A, which have been cited more than 12,000 times. His research interests mainly focus on design and synthesis of advanced materials for electrochemical energy storage.
Design and synthesis of advanced materials for electrochemical energy storage
1. Yang J, Xiao X, Chen P, Zhu K, Cheng K, Ye K, Wang G, Cao D, Yan J*. Creating oxygen-vacancies in MoO3-x nanobelts toward high volumetric energydensity asymmetric supercapacitors with long lifespan. Nano Energy 2019, 58:455-465.
2. Liu W, Niu H, Yang J, Cheng K, Ye K, Zhu K, Wang G, Cao D, Yan J*. Ternary transition metal sulfides embedded in graphene nanosheets as both anode and cathode for high-performance asymmetric supercapacitors. Chem. Mater. 2018, 30: 1055-1068.
3. Yang J, Liu W, Niu H, Cheng K, Ye K, Zhu K, Wang G, Cao D, Yan J*. Ultrahigh energy density battery-type asymmetric supercapacitors: NiMoO4 nanoroddecorated graphene and graphene/Fe2O3 quantum dots. Nano Res. 2018, 11: 4744-4758.
4. Sheng S, Liu W, Zhu K, Cheng K, Ye K, Wang G, Cao D, Yan J. Fe3O4 nanospheres in situ decorated graphene as high-performance anode for asymmetric supercapacitor with impressive energy density. J. Colloid Interf. Sci. 2019, 536:
235-244.
5. Yan J, Ren CE, Maleski K, Hatter CB, Anasori B, Urbankowski P, Sarycheva A, Gogotsi Y. Flexible MXene/graphene films for ultrafast supercapacitors with outstanding volumetric capacitance. Adv. Funct. Mater. 2017, 27: 1701264. (SCI
cited 59 times, ESI Highly Cited Paper)
6. Wang Q, Yan J*, Fan Z. Carbon materials for high volumetric performance supercapacitors: Design, progress, challenges and opportunities. Energy Environ. Sci., 2016, 9: 729-762. (SCI cited 294 times, ESI Highly Cited Paper)
7. Fan Z, Yan J, Zhi L, Zhang Q, Wei T, Feng J, Zhang M, Qian W, Wei F. A threedimensional carbon nanotube/graphene sandwich and its application as electrode in supercapacitors. Adv. Mater., 2010, 22: 3723-3728. (SCI cited 802 times, ESI
Highly Cited Paper)
8. Yan J, Wang Q, Lin C, Wei T, Fan Z. Interconnected frameworks with a sandwiched porous carbon layer/graphene hybrids for supercapacitors with high gravimetric and volumetric performances. Adv. Energy Mater., 2014, 4: 1400500.
(SCI cited 113 times, ESI Highly Cited Paper)
9. Yan J, Wang Q, Wei T, Fan Z. Recent advances in design and fabrication of electrochemical supercapacitors with high energy densities. Adv. Energy Mater., 2014, 4: 1300816. (SCI cited 788 times, Review, Inside Cover)
10. Yan J, Wang Q, Wei T, Jiang L, Zhang M, Jing X, Fan Z. Template-assisted low temperature synthesis of functionalized graphene for ultrahigh volumetric performance supercapacitors. ACS Nano, 2014, 8: 4720-4729. (SCI cited 201 times, ESI Highly Cited Paper)
11. Fan Z-J, Yan J, Wei T, Ning G-Q, Zhi L-J, Liu J-C, Cao D-X, Wang G-L, Wei F. Nanographene-constructed carbon nanofibers grown on graphene sheets by chemical vapor deposition: High-performance anode materials for lithium ion batteries. ACS Nano, 2011, 5: 2787-2794. (SCI cited 175 times)
12. Yan J, Fan Z, Sun W, Ning G, Wei T, Zhang Q, Zhang R, Zhi L, Wei F. Advanced asymmetric supercapacitors based on Ni(OH)2/graphene and porous graphene electrodes with high energy density. Adv. Funct. Mater., 2012, 22: 2632-2641. (SCI cited 1026 times, ESI Highly Cited & Hot Papers)
13. Fan Z, Yan J, Wei T, Zhi L, Ning G, Li T, Wei F. Asymmetric supercapacitors based on graphene/MnO2 and activated carbon nanofiber electrodes with high power and energy density. Adv. Funct. Mater., 2011, 21: 2366-2375. (SCI cited
1121 times, ESI Highly Cited & Hot Papers)
14. Shan D, Yang J, Liu W, Yan J*, Fan Z. Biomass-derived three-dimensional honeycomb-like hierarchical structured carbon for ultrahigh-energy-density asymmetric supercapacitors. J. Mater. Chem. A, 2016, 4: 13589-13602. (SCI cited
43 times)
15. Jiang Y, Yan J*, Wu X, Shan D, Zhou Q, Jiang L, Yang D, Fan Z. Facile synthesis of carbon nanofibers-bridged porous carbon nanosheets for high-performance supercapacitors. J. Power Sources, 2016, 307: 190-198. (SCI cited 40 times)
16. Yang X, Qu F, Niu H, Wang Q, Yan J*, Fan Z. High-performance aqueous asymmetric supercapacitor based on spinel LiMn2O4 and nitrogen-doped graphene/porous carbon composite. Electrochim. Acta, 2015, 180: 287-294.
17. Wang Q, Yan J*, Dong Z, Qu L, Fan Z. Densely stacked bubble-pillared graphene blocks for high volumetric performance supercapacitors. Energy Storage Mater., 2015, 1: 42-50.
18. Yan J, Sun W, Wei T, Zhang Q, Fan Z, Wei F. Fabrication and electrochemical performances of hierarchical porous Ni(OH)2 nanoflakes anchored on graphene sheets. J. Mater. Chem., 2012, 22: 11494-11502. (SCI cited 172 times, ESI Highly Cited Paper, Back Cover)
19. Yan J, Fan Z, Wei T, Qian W, Zhang M, Wei F. Fast and reversible surface redox reaction of graphene-MnO2 composites as supercapacitor electrodes. Carbon, 2010, 48: 3825-3833. (SCI cited 829 times, ESI Highly Cited & Hot Papers)
20. Yan J, Wei T, Shao B, Fan Z, Qian W, Zhang M, Wei F. Preparation of a graphene nanosheet/polyaniline composite with high specific capacitance. Carbon, 2010, 48: 487-493. (SCI 614 cited times, ESI Highly Cited Paper)
21. Yan J, Wei T, Shao B, Ma F, Fan Z, Zhang M, Zheng C, Shang Y, Qian W, Wei F. Electrochemical properties of graphene nanosheet/carbon black composites as electrodes for supercapacitors. Carbon, 2010, 48: 1731-1737. (SCI cited 336 times, ESI Highly Cited Paper)
22. Yan J, Liu J, Fan Z, Wei T, Zhang L. High-performance supercapacitor electrodes based on highly corrugated graphene sheets. Carbon, 2012, 50: 2179-2188. (SCI cited 229 times, ESI Highly Cited Paper)
23. Yan J, Wei T, Feng J, Fan Z, Zhang L, Wei F. One step synthesis of nanoparticles of cobalt in a graphitic shell anchored on graphene sheets. Carbon, 2012, 50: 2356-2358. (SCI cited 6 times)
24. Yan J, Fan Z, Wei T, Qian W, Zhang M, Wei F. Preparation of exfoliated graphite containing manganese oxides with high electrochemical capacitance by microwave irradiation. Carbon, 2009, 47: 3371-3374. (SCI cited 17 times)
25. Yan J, Wei T, Fan Z, Qian W, Zhang M, Shen X, Wei F. Preparation of graphene nanosheet/carbon nanotube/polyaniline composite as electrode material for supercapacitors. J. Power Sources, 2010, 195: 3041-3045. (SCI cited 341 times, ESI Highly Cited & Hot Papers)
26. Yan J, Fan Z, Wei T, Cheng J, Shao B, Wang K, Song L, Zhang M. Carbon nanotube/MnO2 composites synthesized by microwave-assisted method for supercapacitors with high power and energy densities. J. Power Sources, 2009,
194: 1202-1207. (SCI cited 254 times, ESI Highly Cited Paper)
27. Yan J, Wei T, Qiao W, Fan Z, Zhang L, Li T, Zhao Q. A high-performance carbon derived from polyaniline for supercapacitors. Electrochem. Commun., 2010, 12: 1279-1282. (SCI cited 60 times)
28. Yan J, Wei T, Qiao W, Shao B, Zhao Q, Zhang L, Fan Z. Rapid microwave-assisted synthesis of graphene nanosheet/Co3O4 composite for supercapacitors. Electrochim. Acta, 2010, 55: 6973-6978. (SCI cited 309 times, ESI Highly Cited Paper)
29. Yan J, Xiao Y, Ning G, Wei T, Fan Z. Facile and rapid synthesis of highly crumpled graphene sheets as high-performance electrodes for supercapacitors. RSC Adv., 2013, 3: 2566-2571. (SCI cited 33 times)
30. Yan J, Wei T, Cheng J, Fan Z, Zhang M. Preparation and electrochemical properties of lamellar MnO2 for supercapacitors. Mater. Res. Bull., 2010, 45: 210-215. (SCI cited 57 times)
31. Yan J, Fan Z, Wei T, Qie Z, Wang S, Zhang M. Preparation and electrochemical characteristics of manganese dioxide/graphite nanoplatelet composites. Mater. Sci. Eng. B, 2008, 151: 174-178. (SCI cited 37 times)
32. Yan J, Fan Z, Wei T, Zhang M. Effect of chemical modification of graphite nanoplatelets on electrochemical performance of MnO2 electrodes. J. Mater. Sci.: Mater. Electron., 2010, 21: 619-624. (SCI cited 10 times)
33. Wang Q, Yan J, Wang Y, Wei T, Zhang M, Jing X, Fan Z. Three-dimensional flower-like and hierarchical porous carbon materials as high-rate performance electrodes for supercapacitors. Carbon, 2014, 67: 119-127. (SCI cited 263 times, ESI Highly Cited Paper)
34. Wang Q, Yan J, Wei T, Feng J, Ren Y, Fan Z, Zhang M, Jing X. Two-dimensional mesoporous carbon sheet-like framework material for high-rate supercapacitors. Carbon, 2013, 60: 481-487. (SCI cited 91 times)
35. Fan Z, Yan J, Ning G, Wei T, Zhi L, Wei F. Porous graphene networks as high performance anode materials for lithium ion batteries. Carbon, 2013, 60: 558-561. (SCI cited 73 times)
36. Wang Q, Yan J, Wang Y, Ning G, Fan Z, Wei T, Cheng J, Zhang M, Jing X. Template synthesis of hollow carbon spheres anchored on carbon nanotubes for high rate performance supercapacitors. Carbon, 2013, 52: 209-218. (SCI cited 95times)
37. Fan Z, Yan J, Ning G, Wei T, Qian W, Zhang S, Zheng C, Zhang Q, Wei F. Oil sorption and recovery by using vertically aligned carbon nanotubes. Carbon, 2010, 48(14): 4197-4200. (SCI cited 29 times)
38. Wang Q, Yan J, Fan Z, Wei T, Zhang M, Jing X. Mesoporous polyaniline film on ultra-thin graphene sheets for high performance supercapacitors. J. Power Sources, 2014, 247: 197-203. (SCI cited 79 times, ESI Highly Cited Paper)
39. Wang Q, Yan J, Fan Z. Nitrogen-doped sandwich-like porous carbon nanosheets for high volumetric performance supercapacitors. Electrochim. Acta, 2014, 146: 548-555. (SCI cited 29 times)
40. Wang Q, Yan J, Xiao Y, Wei T, Fan Z, Zhang M, Jing X. Interconnected porous and nitrogen-doped carbon network for supercapacitors with high rate capability and energy density. Electrochim. Acta, 2013, 114: 165-172. (SCI cited 20 times)
41. Fan Z, Liu Y, Yan J, Ning G, Wang Q, Wei T, Zhi L, Wei F. Template-directed synthesis of pillared-porous carbon nanosheet architectures: High-performance electrode materials for supercapacitors. Adv. Energy Mater., 2012, 2: 419-424. (SCI cited 129 times)
42. Long C, Wei T, Yan J, Jiang L, Fan Z. Supercapacitors based on graphenesupported iron nanosheets as negative electrode materials. ACS Nano, 2013, 7: 11325-11332. (SCI cited 107 times)
43. Fan Z-J, Wang K, Yan J, Wei T, Zhi L-J, Feng J, Ren Y-m, Song L-P, Wei F. Facile synthesis of graphene nanosheets via Fe reduction of exfoliated graphite oxide. ACS Nano, 2011, 5: 191-198. (SCI cited 537 times, ESI Highly Cited & Hot
Papers)
BOOK (CHAPTERS)
1. Yan J, Fan Z, Zhi L. Functionalized Carbon Nanotubes and Their Enhanced Polymers. In: K Matyjaszewski, M Möller, eds. Polymer Science: A Comprehensive Reference. Amsterdam: Elsevier BV, 2012: 439-478.

Muhammad Shafiq, PhD

Assistant ProfessorDepartment of Electrical Engineering and Energy TechnologyUniversity of VaasaVaasa, Finland
Muhammad Shafiq received the Ph.D. degree in electrical engineering from Aalto University, Helsinki, Finland, in 2014. He is currently an Assistant Professor with the Department of Electrical Engineering and Energy Technology, University of Vaasa, Vaasa, Finland, where he has been with the Smart Electric Systems Research Group since 2017. From 2002 to 2009, he was a Lecturer and an Assistant Professor with the University College of Engineering and Technology, The Islamia University of Bahawalpur, Bahawalpur, Pakistan. He has been associated as a Researcher with the industrial organizations in Finland. He has authored or co-authored more than 40 articles in peer-reviewed international journals and conferences.
His current research interests include power systems and high voltage engineering, especially condition monitoring of power system components, design of sensors for high-frequency measurements, and diagnostics of dielectric insulation faults in power cables, switchgear, and other network components.
Awards
• Postdoctoral Research Funding, 2017
• IEEE IAS PCIC - Honorable Mention - Prize Paper Award, 2015
• Best paper award, 2014
• Fortum Foundation Research Award, 2013
• Scientific Publication Scholarship, 2013
• Fortum Foundation Research Award, 2012
• Fortum Foundation Research Award, 2011
• Best paper award, 2011
• Fortum Foundation Research Award, 2010
[1] M.Shafiq, K.Kauhaniemi, G.Robles, M.Isa, L.Kumpulainen, ''Online condition monitoring of MV cable feeders using Rogowski coil sensors for PD measurements'', Electric Power Systems Research, Vol. 167, Feb. 2019, pp: 150-162,
early online access: Oct. 2018.
[2] M. Shafiq, K. Kauhaniemi, G. Robles, G. A. Hussain, L. Kumpulainen, Partial Discharge Signal Propagation in MV Branched Cable Feeder, IEEE Electrical Insulation Magazine, vol. 34, no. 6, pp. 18-29, 2018.
[3] J. Penttonen,M. Lehtonen, M. Shafiq, ''Smart grid element: efficient controllable inductance with virtual air gap'' IET Generation, Transmission & Distribution, 2017.
[4] J. Penttonen, M. Shafiq, and M. Lehtonen, ''Reluctance Network Analysis for Complex Coupled Inductors'', Journal of Power and Energy Engineering, 5, 1-14, 2017.
[5] J.Penttonen, M. Lehtonen, M. Shafiq, ''A novel 4-limb earth fault compensation reactor for distribution network'' International Transactions on Electrical Energy Systems, 2017.
[6] H. Rohani, C. Yii, M. Isa, S. Hassan, B. Ismail, M. Adzman, M. Shafiq, "Geometrical Shapes Impact on the Performance of ABS-Based Coreless Inductive Sensors for PD Measurement in HV Power Cables", IEEE Sensors Journal, 24th June, 2016.
[7] G. A. Hussain, M. Shafiq, M. Lehtonen, M. Hashmi, "Online Condition Monitoring of MV Switchgear using D-dot Sensor to Predict Arc-faults", IEEE Sensors Journal, Vol. 15, No. 12, pp. 7262 - 7272, Oct. 2015.
[8] M. Shafiq, G. A. Hussain, L. Kütt, M. Lehtonen, “Electromagnetic Sensing for Predictive Diagnostics of Electrical Insulation Defects in MV Power Lines”, Measurement, Elsevier Journal, Vol. 73, pp. 480–493, Sep. 2015.
[9] M. Shafiq, G. A. Hussain, N. I. Elkalashy, P. Hyvönen, M. Lehtonen, “Integration of Online Proactive Diagnostic Scheme for Partial Discharges in Distribution Networks”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 22, No. 1, pp. 436-447, Feb. 2015.
[10] M. Shafiq, G. A. Hussain, L. Kütt, N. I. Elkalashy, M. Lehtonen, “Partial Discharge Diagnostic System for Smart Distribution Networks Using Directionally Calibrated Induction Sensors”, Electric Power Systems Research, Elsevier Journal, Vol. 119, pp. 447–461, Feb. 2015.
[11]G. A. Hussain, M. Shafiq, L. Kumpulainen, F. Mahmood, M. Lehtonen, “Performance Evaluation of Noise Reduction Method during On-line Monitoring of MV Switchgear for PD Measurements by Non-intrusive Sensors”, International Journal of Electrical Power and Energy Systems Elsevier, Vol. 64, pp. 596-607, Jan. 2015.
[12]G. A. Hussain, M. Shafiq, J. A. Kay, M. Lehtonen, “Pre-Emptive Arc Fault Detection Techniques in SwitchgearPart III, From the Laboratory to Practical Installation”, IEEE Transactions on Industry Applications, Vol. 51, No. 3, pp. 2615-2623, Oct. 2014.
[13]M. Shafiq, L. Kütt, M. Isa, M. Lehtonen, “Design, Implementation and Simulation of Non-Intrusive Sensor for Online Condition Monitoring of MV Electrical Components”, Engineering (Eng) Scientific Research Publishing, Special issue of Electrical Engineering, Vol. 6, No. 11, pp. 680-690, 2014.
[14]M. Shafiq, G. A. Hussain, L. Kütt, M. Lehtonen, “Effect of geometrical parameters on the high-frequency performance of Rogowski coil for partial discharge measurements”, Measurement Elsevier Journal, Vol. 49, pp. 126–137, 2014.
[15]L. Kütt, M. Shafiq, M. Lehtonen, H. Mõlder, J. Järvik, “Air-Core Sensors Operation Modes for Partial Discharge Detection and Online Diagnostics in Medium Voltage Networks”, The Scientific Journal of Riga Technical University - Electrical, Control, and Communication Engineering, Vol. 4, pp. 5-12, 2013.
[16]M. Shafiq, M. Lethonen, L. Kutt, G. A. Hussain, M. Hashmi, “Effect of Terminating Resistance on High-Frequency Behaviour of Rogowski Coil for Transient Measurements”, Journal of Electronics and Electrical Engineering (Elektronika Ir Elektrotechnika) Vol. 19, No. 7, pp. 22-28, 2013.
[17]M. Shafiq, L. Kütt, M. Lehtonen, T. Nieminen and G. M. Hashmi, “Parameters Identification and Modeling of High Frequency Current Transducer for Partial Discharge Measurements”, IEEE Sensors Journal, Vol. 13, No. 3, pp. 1081
– 1091, 2013.
[18]M. Shafiq, L. Kütt, M. Isa, M. Hashmi, M. Lehtonen, “Directional Calibration of Rogowski Coil for Localization of Partial Discharges in Smart Distribution Networks”, International Review of Electrical Engineering (IREE), Vol. 7. No. 5, pp. 5881-5890, 2012.
[19]Muzamir Isa, Nagy I. Elkalashy, Ghulam M. Hashmi, M. Shafiq, Matti Lehtonen, “Three Measuring Points for Partial Discharge Location in Energized Covered-Conductor Overhead Distribution Lines: Algorithm and Experimental Evaluation”, International Review of Electrical Engineering (IREE), Vol. 7, No. 4, pp. 5221-5232, 2012.
[20]M. Isa, N. I. Elkalashy, G. M. Hashmi, M. Shafiq, M. Lehtonen, “Correlation Evaluation of Unsynchronized MultiEnd Windows for Locating Partial Discharge Sources in Covered-Conductor Overhead Lines”, International Review on Modeling and Simulations (IREMOS), Vol. 5. No. 4, pp. 1854-1857, 2012.

Yogesh Popat

PrincipalDelhi Public Elementary SchoolIndore, India
Yogesh Popat has received his Bachelor of Engineering (Hons.) in Electronics & Telecommunication in 2011 and Master of Technolgy (Hons.) in Electrical Engineering in 2014. He Worked as Asst. Prof. at Rungta College of Engineering and Technology, Raipur, Chhattisgarh, India, as a PGT Physics at N. H. Goel World School Raipur, Chhattisgarh, as a PGT Physics and Coordinator at Taurian World School Ranchi, Jharkhand, India. His Field of Interests is Power Electronics, Electricity, and Education.
Power Electronics (CPDs)
Teaching and Research Awards
• Awarded by Global Outreach Education award 2019 for Best Students Initiative, Presented by Padmashri awardee Prof. Dr. Akhtarul Wasey, VC, University of Rajasthan.
• Awarded by Global Outreach Research award 2019 for Best Young Researcher Presented by Padmashri awardee Prof. Dr. Akhtarul Wasey, VC, University of Rajasthan.
• Awarded by Pride of Indian Education award 2019 with title Excellence in Instructional leadership and Research.
• Selected for Best Teacher award 2019 by Institute of Technical and Scientific Research (ITSR) Jaipur. (will receive the award on 31st March 2019 at Jaipur)
• Honored by Professors of Birla Institute of Technology, Mesra, Ranchi and Amity University for taking new initiative for organizing National Conference on Education in Science, Mathematics and Technology 2018 at Taurian World School, Ranchi.
• Best Teacher award by the management of Rungta Group of Colleges, Bhilai, C.G in 2013.
• Teaching Excellence Award by the management of Taurian World School, Ranchi in Session 2017-2018.
• Yogesh Popat, Sourabh Shrivastava, Harshit Saxena, “Current Scenario and Future Scope of Solar energy in India”, Published in International Journal of Science and Research, Serbia, Volume 1, Issue 2, ISSN 2619-9955, DOI: 10.18421/SAR12-05, June 2018, Page 57-66
• Yogesh Popat, S.S Shrivastava, Rajat Tiwari “Accident an arising Issue- A Serious thought” Published in Taurian Innovative Journal” NCESMT/TGC/120917/02, Page 7-13. (Best Paper Award)
• Yogesh Popat, Sourabh Shrivastava, Harshit Saxena, “Status of Solar Energy in India” Published in Taurian Innovative Journal” NCESMT/TGC/120917/06, Page 31-38. (Second Best Paper Award)
• Yogesh Popat, Arshneet Kaur, “Critical Review and Study of Brain Machine Interfacing and its Application and Challenges”, Published in International Journal of Information Technology and Electrical Engineering, Volume 7, Issue 1, ISSN 2306-708X, Page 42-49.
• Yogesh Popat, “Total Harmonic Distortion analysis of NN Controller based Dynamic Voltage Restorer For Voltage Sag Mitigation”, Published in International Journal of Information Technology and Electrical Engineering Volume 6, Issue 5, ISSN 2306-708X, Page 38-46.
• Yogesh Popat, Prof. Ashish Sahu, “Modeling and Simulation of MLFNN Controller based DVR to Compensate Voltage Sag in Electrical Distribution System”, Published in International Journal of Information Technology and Electrical Volume 4, Issue 1, ISSN 2306-708X, Page 17-24.
• Yogesh Popat, Prof. Ashish Sahu, “Modeling and Simulation of DVR using PI Controller to Compensate Voltage Sag in Electrical Distribution System”, Published in International Journal of Information Technology and Electrical Engineering Volume 3, Issue 4, ISSN 2306-708X, Page 12-19.
• Yogesh Popat, Shruti Sharma, Govinda Sachdev “Energy Efficient Lighting for Railway Tunnels in India”, Published in International Journal of Scientific & Engineering Research Volume 4, Issue 6, ISSN 2229-5518, Page 1846-1849.
• Yogesh Popat, Prateek Dutta Gupta, Shruti Sharma “Generation of Brain Waves in Different Psychological Conditions”, Published in International Journal of Engineering Research and Technology, Volume 2, Issue 4, ISSN 2278-0181, Page 1363-1366.
• Yogesh Popat, Aman Kumar, Anubahv Raj, Angad Anand, “Study of Piezoelectric effect” NCESMT/TGC/120917/11, Page 70-74. (Best Paper Award)

Asghar Gandomkar, PhD

Assistant ProfessorIAU Shiraz UniversityShiraz, Iran
Education
 Science & Research University, Tehran, Iran, Reservoir Engineering, B.Sc., 2008.
 Science & Research University, Tehran, Iran, Reservoir Engineering, M.Sc., 2010.
 Shiraz University, Shiraz, Iran, Reservoir Engineering, Ph.D., 2015.
Research and Professional Experience
 Head of Petroleum Research Center, IAU Shiraz, 2016-2018.
 Member of Reservoir Study Committee of Enhanced Oil Recovery Consortium Project, between IAU and NIOC, 2014-present.
 Head of Chemical and Petroleum Engineering Department, IAU Shiraz, 2015-2017.
 Member of SAHA Committee in FAR Province, 2016-2018.
 Work at the MAPSA Company, EOR section, 2014- 2015.
 Head of Petroleum Engineering Department, Science & Research Branch University, Fars Branch, 2012-2014.
 The Member of the Judgment Committee of the Fourth International Festival of Inventors, Initiators and Innovators Held on April 22- 24 by FSR, Shiraz, 2014.
 Work in the Iranian Central Oil Field as elite, (Using Hydraulic Flow Unit Technique on HOMA gas Reservoir), 2010-2012.
 Faculty Member of IAU Shiraz, Chemical and Petroleum Engineering Department, 2010- present.
 Work at the Petroleum Research Center as a Research Assistant in Tehran, 2010 and 2011. (Screening EOR methods on NAFTSHAHR oil reservoir).
EOR, Low Salinity Waterflooding, Wettability Alteration, Polymers as Gas Thickeners, Asphaltene Precipitation, CO2 Sequestration, Mathematical Modeling, Reservoir Simulation, Nano Technology, Reservoir Rock Typing, and Production Engineering.
 Advanced Engineering Mathematics (Ph.D., Level)
 Fluid Flow in Porous Media (M.Sc., Level)
 Advanced Engineering Mathematics (M.Sc., Level)
 Reservoir Simulation (M.Sc., Level)
 Gas Reservoir Engineering (M.Sc., & B.Sc., Levels)
 EOR (M.Sc., & B.Sc., Level)
 NFR (M.Sc., Level)
 Reservoir Engineering I and II (B.Sc., Level)
 Reservoir Rock Properties (B.Sc., Level)
 Reservoir Fluid Properties (B.Sc., Level)
 Engineering Mathematics (B.Sc., Level)
1.Asghar Gandomkar, Safoura Amiri, Influence of electrical surface charges on thermodynamics of wettability during low salinity water flooding on limestone reservoirs, Journal of Molecular Liquids, 2019.
2.Mehdi Ghorbani, Asghar Gandomkar, Gholamhossein Montazeri, Describing a strategy to estimate the CO2-heavy oil minimum miscibility pressure based on the experimental methods, Journal of Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2018.
3.Asghar Gandomkar, M.R. Rahimpour, The impact of monovalent and divalent ions on wettability alteration in oil/low salinity brine/limestone systems, Journal of Molecular Liquids, 248, 1003-1013, 2017.
4.Asghar Gandomkar, Bijan Honarvar, Yousef Kazemzadeh, Zeinab Derikvand, An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir, Iranian Journal of Oil and Gas Science and Technology, Vol. 5, No. 4, pp. 01-17, 2016.
5.Asghar Gandomkar, M.R. Rahimpour, Investigation of low salinity waterflooding in secondary and tertiary enhanced oil recovery in limestone reservoirs, Energy & Fuels journal, 29, 7781−7792, DOI: 10.1021/acs.energyfuels.5b01236, 2015.
6. Asghar Gandomkar, M.R. Rahimpour, A. Jahanmiri, Applying a New Method to Solve Diffusivity Equation for Gas Reservoirs, Journal of Petroleum Science and Engineering, Elsevier, 10.1016/j.petrol. 09.028, 2014.
7.Mehdi Ghorbani, Ali Momeni, Saied Safavi, Asghar Gandomkar, Modified Vanishing Interfacial Tension (VIT) Test for CO2-Oil Minimum Miscibility Pressure (MMP) Measurement, Journal of Natural Gas Science and Engineering, Elsevier, JNGSE-D-13-00182, 2014. 8.M. Motealleh, Riyaz Kharrat, Asghar Gandomkar, M. Nematzadeh, Hamid Hosseinzade Khanamiri, , Mohamad Hossein Ghazanfari,” Experimental Study on Applicability of Water-
Alternating- CO2 Injection in the Secondary and Tertiary Recovery in One of Iranian Oil Reservoir ”, Journal of Petroleum Science and Technology, 2013.
9.M. Motealleh, M. R. Hojjati, Asghar Gandomkar, M. khalifeh, M. Izadi,” an Estimation of Fault Displacement by Analyzing Reservoir Pressure Data (MDT Data)”, Journal of Petroleum Science and Technology, 2013.
10.H. Hosseinzade, M. Nematzade, Asghar Gandomkar, M. Motealle, Riyaz Kharrat, M.H. Ghazanfari, Masood Aghajani, Experimental study of secondary CO2 injection in a low temperature naturally fractured reservoir, Journal of Petroleum Science and Technology, 2013.
11.Asghar Gandomkar, Riyaz Kharrat,” Tertiary FAWAG Process on Gas and Water Invaded Zones, an Experimental Study”, Journal of Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, UESO 493921, 2012.
12.Asghar Gandomkar, Riyaz Kharrat,” Anionic Surfactant Adsorption through Porous Media in Carbonate Cores: an Experimental Study”, Journal of Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, UESO 501368, 2012.
13.Asghar Gandomkar, Riyaz Kharrat, Mehdi Motealleh, Hamid Hosseinzade Khanamiri, Mostafa Nematzadeh, Mohamad Hossein Ghazanfari,” Experimental Investigation of Foam for Gas Mobility Control in Low-Temperature Fractured Carbonate Reservoir”, ” Journal of Petroleum Science and Technology, LPET 493905, 2012.
14.Mostafa Nematzadeh, Hamid Hosseinzade Khanamiri, Aghajani Massoud, Riyaz Kharrat, Asghar Gandomkar, Mehdi Motealleh, Mohamad Hossein Ghazanfari,” Experimental Study of Secondary WAG Injection in a Low-temperature Carbonate Reservoir in Different Miscibility Conditions”, Journal of Petroleum Science and Technology, 2012.
15.Asghar Gandomkar, M. R. Rahimpour, A.N. Goosheneshin, Wormhole Propagation and Permeability Enhancement in Low-Temperature Tight Carbonate and sandstone Reservoirs, Submitted to Journal of Petroleum Science and Engineering, Elsevier, 2018.
Books
1.Mehdi Ghorbani, Asghar Gandomkar, Abdolreza Dabiri, Reservoir Rock Properties, IAU Publisher, 2018.
2.Asghar Gandomkar, M. Izadi, M. Khalifeh, Solutions Manual for Applied Petroleum Reservoir Engineering by Craft, 2012.

Submit Manuscript

Join as a Editor